Magnetic Articulated Corn Characters - FILES (Patreon)

The attached files contain 2 Corn Character Versions (Bald or Hairy), a Detachable Husk and 2 Two-Pack Corn Trays. Each of the components has a built-in magnet hole inside the model so if you use the supplied 3mf file your printer will pause after the holes are built and then just simply place the magnets into the holes and resume the build. The printer will print directly over the magnets concealing them inside. Once complete the corn snaps into the husk and the husks stick to the trays. The set can then be used as a cute little detachable fridge magnet set.

Please note: The hairy corn version has hair that extend to a support tower. Once complete, cut the hair at the edge of support tower and use heat to shape and mold the corns hair to the desired effect. The thin strands heat up very quickly so use minimal heat and very quickly. PLEASE USE CAUTION THE HAIR STRANDS YOU ARE MELTING AND SHAPING ARE VERY HOT. If you are not comfortable with this process please use the bald version of the corn.

For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file that contains the pause built into the slicer. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached.

Magnets are the same as most of my fidgets, 8x3mm and can be purchased from Amazon using the link below...

https://amzn.to/4lHBAIz

All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I use the 4 Color AMS system to print the models in color.

FILAMENTS IN PHOTO ABOVE:

Corn - Elegoo yellow PLA - https://a.co/d/6HSwoIH

Corn Hair - Sunlu Lemon Yellow - https://a.co/d/at24aJH

Corn Husk - Stronghero3D Autumn PLA - https://a.co/d/61WTBkZ

All other filaments not mentioned are standard solid pla filaments.

Please let me know if you have any questions. Thank you!

Mike