Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Downloads

  • Saw Handle Mods (1).pdf

Missing 1 full-res photo, 1 file, as this post has not yet been imported.

Content

Friends: 

I promised it and now it's time to deliver! 

When I reviewed the cheap Spear and Jackson tenon saw a few weeks ago, I was unimpressed (to put it mildly), but I had a feeling we could re-make this tool into something special. All the elements were there; they just needed refining. 

I'll admit, this was a bigger challenge than I was expecting, but the rewards were bigger, too. The new tool is so much....hold on!  I'm about to go and spoil it.

Some days, I just get ahead of myself. 

Hope you enjoy the video. I posted the handle template earlier in the week, but I'll attach it to this post, too. 

Have a safe and fun weekend!

--Rex

Files

Previews only

Make a budget backsaw AWESOME. Total upgrade!

Make a $45 tenon saw perform like a premium tool in this complete rehab video. More video and exclusive content: http://www.patreon.com/rexkrueger Get the Spear and Jackson tenon saw from this video: https://amzn.to/2zykhs6 Paul Sellers sharpening video: https://www.youtube.com/watch?v=UA5DixEaaUo Saw Vise Build Video: https://www.youtube.com/watch?v=_e4rqp0yPzg Cut Smooth Curves with Flat Tools: https://www.youtube.com/watch?v=LX-0DDYRfcc&t=226s Tools and Materials in this Project (affiliate): Spear and Jackson Tenon Saw: https://amzn.to/2zykhs6 Same Saw, 10 inches long: https://amzn.to/2T5h75Y Crown Tenon Saw: https://amzn.to/3fM9uek Digital Calipers: https://amzn.to/35YO4WK Tack Hammer: https://amzn.to/35XSrBz (I used this for removing the set. Not the exact one I use, but a quality tool.) Saw File: https://amzn.to/2LuhxOV (Not the exact one I use, but a good tool from a quality maker. Correct size for this saw.) Saw Nuts: https://amzn.to/2T4hhKZ Saw Nuts (different source): https://bit.ly/2Z4daSO Super 77 Adhesive: https://amzn.to/2zymSCm Dreadnaught Half-Round File: https://amzn.to/2Z504oi Large Round File: https://amzn.to/2Z6hykb Minwax English Chestnut Stain: https://amzn.to/2Z1iGpb Clear Shellac: https://amzn.to/2AtgmNB Paste Wax: https://amzn.to/3dW596P Become a member of this channel! Get custom badges and emojis you can use during chats: https://www.youtube.com/channel/UCj4SLNED1DiNPHComZTCbzw/join

Comments

Marty Ford

Rex, as always, a great video. I really need to get back into the workshop. I have a little side hustle of making longboard skateboards and now that the weather is getting nice.. I have about 8 board orders to fill. I have taken many of the basic skills I have learned making some of your earlier projects and have used that new knowledge to improve my process to make longboards. Thank you. Also, now I need a back saw LOL.

Yohann_M

Excellent video, Rex! I knew you'd improve this thing beyond recognition, and you did. It almost makes me want to get one, but I already have a Disston tenon saw (that I use for dovetails too). And yes, you can have too many saws. :)

Martin Hartley

I want to go out and buy one of these saws just to try it out as a project.

TwoRavens

Okay, now that's a nice upgrade! I have a vintage tenon saw I need to restore, and the handle looks almost identical to yours that you used as a pattern. I'll have to check the saw nuts and see if it's of similar vintage. I also watched the Paul Sellers video you linked, and now I have someone else to watch during quarantine, so thanks for that!

Ken

I’ve been struggling with my woodworking budget for a long time now. I’m so excited to modify a new saw that actually works. Thank you!

Rex Krueger

Really, once you have 2 or 3 good ones in the standard sizes, you're done. I seriously have 20 and I need to let some of them go.

Alan Dennis

Great one man, this is one if the best videos you have done. I restored an old saw. Thing is great, and cuts a prefect line but is slow as can be. But your explanation of the angle tells me right where I need to make the change. Thanks!

Daniel Bohrer

Tough economy? Free plans? Hell, I'll just raise my patreon pledge. This is definitely the content I'm interested in, and its getting more and more interesting in the last months :)

Adrian Abshire

Great video Rex! I made a two-hour trip on Friday to WoodCraft in Franklin (near Nashville), TN and bought one of their Veritas dovetail saws with 20tpi teeth. I got it home and opened it up only to find that it was a PUSH saw! I guess I assumed that all dovetail saws were PULL saws :-( Anyway, I made the trip back to that store on Saturday (since they usually don’t let you return things at their other stores since they are independently owned franchises). Sure enough they did not have any PULL saws in stock but lots of Veritas PUSH saws :-( So now I’m saw-less still. I will be ordering the Spear and Jackson saw today and will attempt to destroy it once it comes in :-) Thank you for making these and I’m upping my monthly donations since your videos are something I really look forward to! BTW, what TPI count do you recommend for the different types of saws and can that be changed so that there are finer teeth at the front/top of the saw to make starting easier (Cosman-style)?

Yohann_M

Adrian - Most western saws (including the Spear & Jackson) will be push saws. In fact, most dovetail saws are push saws. You can get some Japanese pull backsaws that can be used for dovetailing, but you generally cannot sharpen those plates. A 14 or 16 TPI backsaw is usually what you want, as you can sharpen those easier. 20 TPI is much harder to sharpen. More teeth = smoother cut, but harder to maintain.

Bas Cost Budde

Very good! Spending time is more valuable than spending money. Time spent on learning is an inalienable richness. I hope this takes root with "our younger audience"--I want to credit those who already learned this value though.

Rex Krueger

Man, it's so nice to hear that! I get a lot of positive feedback from Patrons, but I never get tired of hearing that I'm relevant.

Kevin Kennedy-Spaien

Rex, thank you for this. The blade and teeth adjustments are broadly applicable, so even though I can't drop the bucks for even the Spear and Jackson right now, I can use that info to improve what I do have. You are, proverbially, the man!

John Becker

I ended up getting a cheap Husky Backsaw right before the last video. I am definitely going to try some of these things on it!

Carla D Best

Great video, as always! I'm on the hunt for a tenon saw myself!

Judd Coughlin

I actually have tissue. It is a nice weight and when it cut poorly, I thought it was on me. I am looking forward to turning this thing into a beast.

John Flynn

Rex, what a cool video. This is the type of content that makes your channel unique.

stlmch

I was looking for a backsaw lately, but all I could find in my neighborhood were either $75+ specimens or $15 in big box stores. The latter ones look much like hand saws few shelves away just smaller with higher TPI. Are they (generalization, I know) any good? Where good means: is the steel good enough to grind their hardened universal teeth and cut new ones?

Xander Madsen

Absolutely love this content!! Picked this up myself, just waiting on the triangular file! can't wait to make a sweet saw out of a cheap $aw :)

Ken

I bought the saw and made some test cuts before any changes. YUCK. I completed all of the suggested modifications no I’m very happy with the performance and the results. I just wish I could post a picture of the finished product. 😁