Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Friends: 

This week, we're expanding our collection of homemade tools with this Japanese cutting gauge. This handy little tool lets you mark a line AND cut it deeply at the same time, eliminating the need for a second knife cut. It's a great little time-saver and a great skill-building project that costs pretty much nothing. 

I love making tools like these because they're every bit as good as the tools you would buy, but they're cheaper and you learn a lot. 

At the end of the video I mention that I'm taking a week off, and that's half true. I need to do a bunch of non-video stuff next week so I won't be taking any actual time off. I also recorded a second video this week, and that will be up for Patrons next week. 

As usual, the plans are not drawn yet. They will be posted here and on the Discourse plan archive on Wednesday. 

Have a great weekend!

--Rex

Files

Previews only

Making a Japanese Marking Gauge!

Become a member of this channel! Get custom badges and emojis you can use during chats: https://www.youtube.com/channel/UCj4SLNED1DiNPHComZTCbzw/join

Comments

Paul Ballmann

Great video and I love that you show mistakes! Thanks!

Frans van Ballegooijen

I can understand that everything that's going on is very demanding. And your health is way more important than this channel. So take all the time that you need to recharge your battery. We'll see you when you get back... BTW: Great video, once again. Just don't drink 'n shop in the future, this one had a good ending, but next time who knows, before you know it you could've bought a Chinook. Where are you going to park that? ;-)

Kevin S Thomas

Funny and informative as usual. Take a knee Rex, Family First.

Deron Kosloski

Absolutely, take two if you need too we aren't going anywhere! Great project as usual, Thanks.

Phil Rod

Great tool. I have an old one similar to that at our house up north. I've not seen or used it in a couple years.

WhatMeWorry

I may not be following the design close enough but would it really matter if your wedge was on the other side?

Matt Mohon

So early in the video I was thinking, "I wonder if he's gonna mess up and call it out?"...and when ya held it up I saw the mortice difference...but I didn't think it'd make a difference. I appreciate calling out the mistakes...makes me feel better about mine. That's a great little gauge too.

Rick Prosser

Excellent! Good instructions, humor, templates, and screw ups. What's not to like?

Kirk von der Heydt

Always like that you aren't afraid to show that you mistakes -- like the rest of us. Definitely, going to make this one really soon.

Richard Hengst

Love the project, especially the putty knife blade. Going out to the back yard right now and begin the cutting project. And ... recharge, recharge, recharge. You've done plenty for us.

Bill Finizia

Awesome job! I am new to this so you taking a break gives me a chance to catch up! 8^)

Stuart

I think I spent the first half of the video thinking ... I need to send Rex a message because there is a book that he really needs to read! My blood pressure went back to normal when he held up the book. I am glad to see he is also a book nerd and likely has an ample library. The second thing I would note is the gauge he built is in my opinion better than the commercial ones available at finer woodworking stores such as Amazon, Lee Valley, etc. because of the stepped fence design makes the stroke much more stable. I might have missed it in the video but the book goes into quite a bit of detail about the shape and placement of the knife to make the cut stable and less likely to wander.

Stuart

I am going to start trying to use the return code: too many beers. It is probably useful in online reviews of products that don't perform up to expectations... :)

Jon Flak

Take the time off Rex. Might give some of us a little time to catch up😉

Jeremy Denslinger

yes and not. He could have used the first one, but the blade would had to been re-seated to compensate for the 180 degree shift.

David Coxon

Now my challenge is to adapt that design for a left-hander. I think it is a mirror image - Reverse the direction of the curve on the blade - oh and can I have your 'mistake' piece.

WhatMeWorry

I'm not sure he would even need to that. Just turn the beam over and move left to right instead of right to left.

Thomas Hverring

Great video :^) Take some time off! You can always updates us here and on Discourse. We'll be here (and there) :^)

Rex Krueger

So, the gauge is not symmetrical front-to-back. It's much longer in front (the part pointing towards you) if you flip it around, it will be too short to bear on the wood effectively. Believe me, I tried to make it work like this.

The Poor Man

Go take a Vacation Rex. Sincerely all of us

Shawn D

Its mahogany.. and I'm glad Im not the only one to make goofs that make me wonder about my brain

Mark R. Ferraro

Great job - just confused why first one would not work. Sure, the mortise/dado was backwards, but I would have tried it.

Mark R. Ferraro

Wood might be sapele - looks like mahogany with flecks and fine streaks of black...

Ethan Chitty

Might be able to cut in from the end and rotate the cutter 90 degrees for a fenced scratch stock from another piece of that saw. It’d also let you use up that backwards cut component.

Tony Softich

GREAT VIDEO!!! I love the idea of this cutting gauge and looking forward to making it. THANKS

allen woo

That's a great tool. Have a great vacation

Pete Graham

We understand but will miss you !!

William Allen

Vacation! Woohoo! Enjoy yourself.

Brian Benson

Hey Rex, great video as always! Just had some time to catch up and I really appreciated the part where you showed you screwed up. That had me rolling!! 🤣 That helps and let’s noobs like me know that all my mistakes aren’t just me, they happen even to skilled people! It’s very encouraging, especially as I continue to learn and grow with woodworking (otherwise known as “makes tons of mistakes while learning and growing!”). 👍. Hope you are enjoying the vacation!!

Robert Horn

Rest up and come back even

Rex Krueger

It's true that we all mess up. I guess we take it in stride as we get better, but I still get really mad at myself.

Michael Eleftheriou

I made mine this morning out of a bit of beech I had lying around, and it's come out nice, I think. I just need to do the cutter: I have some 3 mm and 5 mm 02 steel I used to make a couple of plane irons last year: do you all think the 3 mm would be overkill? I'd cut, shape, temper and anneal it.

Rex Krueger

If 3mm is what you have, then that sounds fine! (But you want to anneal it, cut it, shape it, harden it and then temper it. The order really matters).

Michael Eleftheriou

I remember the process, but--obviously--not the terminology! Many thanks--I'll use the 3 mm. All the best and thanks for all the good stuff. :)