Home Creators Posts Import Register Favorites Logout

Content

Hello again!

I've had such a great time making these and I sincerely appreciate the great response they've received!

Soooo I've decided to drop another one of my themes for the Capsule Club and Double Whammy Patrons this month!

I present to you the HEARTS AFIRE theme! Available for both the GachaPop V2 and Lite Versions.

I strive to make sure that these files are as compatible with all scenarios but if you find issues or have suggestions for any of them please let me know.

Once again, thank you for the support and motivation, and HAPPY PRINTING!

-Adam

Special Print/Installation instructions;

There are no real modifications needed for the print. I've configured the print settings to be fairly automatic though some minor changes may need to be made here and there for varying devices. It's a pretty straight forward 3 color max print. I do not have color swap/ no ams configured for these YET, however I am working on perfecting that portion, and hope to have those versions available soon!

The knob and knob shaft tolerances are tight so no adhesive should be needed between those parts. If it is needed a standard CA glue used SPARINGLY will suffice.

Signage is attached with a standard CA glue. I typically alternate between that and UV adhesive. Either will work just fine.

Bill of materials.

The filaments I used for this project are as follows:

Sunlu Silk Silver PLA - The best silver PLA I've been able to find.

Sunlu Matte black PETG - whenever possible I make most if not all of the machines and themes out of PETG due to it's ability to stand up to those hot days or direct sunlight. In this case it's been used specifically for the knob shaft due to it's strength properties.

Sunlu Matte black PLA - Not advisable for use in areas where the machine will be exposed to direct sunlight or high temps however I used a bit here for the signage and coin mech face.

eSun Fire Engine Red Matte PLA - Gives a good vibrant color to the flames.

If I've forgotten to list anything let me know!

Changelog:

Added the coin mech face to the lite version .zip

Corrected hopper mesh dimensions for the Lite version.

Update: 6/13/2026 - Corrected scaling of flame border for Lite version

Files

Comments

DB Creations

Can’t wait to print these for my website and my booth setup

Alyse

Omgsh!! These are amazing!! Definitely need a Duck one!! Or a farm animal one! Just some ideas! Keep them coming!!! 😍

Cathy Wingrove

Are there any plans to make a pokemon specific one?

ABC Creations!

Yes, It's currently in the concept stages :) -Adam

Ressa Delp

I was coming to ask this!

Ressa Delp

Def need Pokemon, Mario and or/gaming. Anime theme (general anime). General Disney theme. Animals. Ummm I’m sure I can think of more. These are incredible!

Daniel Hermosillo

Can you make one that’s a mystery? Noah’s arc egg where they have to collect two of every animal I don’t think my church will appreciate this one.

Layered_Legion

This turned out wicked!!! 🤘🤘🤘

Gary Alexander

Lmao your killing us keep them coming

Layered_Legion

How do you use these for your website?

DB Creations

I’m an affiliate so I’m allowed to sell printed copies of the Gacha pop

Layered_Legion

How about a cryptids version! Make mini bigfoot, lochness, skin walker ect minis to go in them.

Layered_Legion

The pokemon and gaming ones would be great for in person

Christine

This old brain is not able to think of what themed items to go in this gotchapop. Do you mind enlightening me? I do think it is pretty cool looking and want to make one.

ABC Creations!

So this was kinda made from a brainstorming session with no real attachment to any existing release. When I designed it I kinda had a tattoo shop in mind where you would buy a token and get a piece of flash art. Kind of a $10 get what you get tattoo. They’re very popular in Vegas. You can definitely put whatever your heart desires in hearts afire though! 😁 -Adam

ABC Creations!

Will definitely add it to the list of ideas :) thanks! -Adam

Layered_Legion

No way! That sounds awesome, I can't wait too see that!!

Dee Trading Post

Can these be resized for the mini Gacha machine?

ABC Creations!

Hi Dee, the themes are available for both the V2 and Lite versions of the GachaPop machines. -Adam

ABC Creations!

Hi James, the downloads are available to Capsule club and Double Whammy patrons under the Shop tab in the Capsule Club May link. -Adam

Christine

Thank you. No tattoo shop here but definitely has the mind going now. You are so talented and this is awesome. Can't wait to see what else you produce.

ABC Creations!

Hi, The Lite version is available in the same area. I apologize, I'll edit the post to reflect that. It will be listed in the May downloads section as "Hearts Afire Lite Theme" - Adam

Sketchy Art Studio

Is there any alternative to PETG? The machine would be inside so the uv and heat protection isn’t super necessary. The drying process just makes me nervous for PETG

ABC Creations!

Yes, you can use PLA all day long. In fact many of mine are made totally from PLA. I just don’t use them outside very often. - Adam

DB Creations

It keeps telling me I need to upgrade my membership when I already have the high tier membership to be able to sell your products is there a problem on my end or your end? If you could check it out please let me know. I’d really appreciate it.

HyBee's Hive

Do you have another patreon account by chance? When I pull up your profile information it says you are not subscribed -Hy B

DB Creations

I bet I do have another Patreon account I started with the free one then got invited to be a reseller so I made the purchase for about $32 2 days ago my reseller account is under DB Creations

Rena Marulli

Hi so I printed the hearts of fire cages and they are too small. Not wide enough not sure if just me. Or not. I am gonna try and reprint with adjustment.

ABC Creations!

Hi Rena, I will take a look at the files and adjust if necessary, was this for the Lite or V2? Thank you. -Adam

ABC Creations!

Hi Rena, I've corrected the mesh dimensions for the Lite version. I'm very sorry for the trouble. Please let me know if you find any additional issues. -Adam

Rena Marulli

Thank you :). That was quick.

Rena Marulli

Sorry I didn’t see that right away. It was for the light obviously, you figured it out. Thank you.

Wacky McLovin

Lol, I was just going to ask about this as I have a waiting list of 15 orders for the XL size when it does come out lol

ABC Creations!

Hi Michael, all files are available under the “shop” tab in the June downloads folder. -Adam

B C

What I am wondering is what capsules are people using for the different themes? It would be cool to have themed capsules to match the prospective machine as it looks weird to have Pokeballs in a Hearts machine. Please advise on alternative capsules.

ABC Creations!

Hi BC, so these are kind of a new dimension to the GachaPop family, and as I move forward with the other artists various themes will be released that reflect current, former and upcoming releases from them. Some of the designs that I’ve uploaded to start are designs that existed before I joined the team. Those would be this one, and the horror mystery machine. I never really had anything specific in mind for them when I first made them. I always figured they had a place somewhere and were just waiting for the right person to fall in love with them :) for me it’s about the creativity and building from what inspires me. Fill them with whatever you think works best for the design and we’re always open to suggestions! Happy printing! -Adam

B C

Thanks for the reply. I guess what I am asking is are the standard capsules in the Gatchapop V2 the same as the Pokeball capsules? I dont want to print a mess of them and have them come apart inside the machine!

Stéphanie Thery

Bonjour, j'aimerais beaucoup mettre un de vos super distributeurs dans mon restaurants mais j'ai 2 questions : est-il possible de faire des capsule de 6cm ? Et y a t-il une version "1 euro" ? Merci