Home Creators Posts Import Register Favorites Logout

Content

Good afternoon everyone!

It's my pleasure to present to you the

Sweet Paws Capsule Coaster!

For the GachaPop V2 and Lite

The Sweet Paws are taking a break from the norm and spending the day at the amusement park!

With a curving rollercoaster track leading from the hopper to the prize chute it's just one more fun way to enhance the appearance of your GachaPop V2 Capsule Vending Machine.

With a softer color palette this will make a nice addition to your GPop collection!

This theme is available to all current Capsule Club and Double Whammy subscribers by opening the "Shop" tab, and then clicking the Capsule Club July 2026 folder. Scroll to the bottom of the page where you'll find "Sweet Paws Capsule Coaster V2.zip", or “Sweet Paws Capsule Coaster Lite.zip”.

So enjoy, and as always Happy Printing!

Thank you!

Adam |ABC Creations!

The LITE version is still undergoing a few tweaks and should be available in the next few days.

Please be sure to check out the Readme.txt file included in the zip for important information, filament list and helpful installation tips.

If you have any questions or find any issues with the files please don't hesitate to reach out to me in the Discord.

UPDATE:

Hey Guys! I sincerely apologize for the delay in getting this out to you but the LITE version of the Sweet Paws Capsule Coaster theme is now available in the Hybee3D Library!

I truly appreciate your patience while I adjusted this file to make sure it was just right!

Let me know if you find any issues with it. Thanks! -Adam

Files

Comments

ClickQuest3D

This timing is perfect! Thanks!!!

Johnny smith

😱 I was just looking into things for these. My grandchildren love them so I can't wait to make them

Liquid Pickle

sorry for bothering, new to patreon. my phone isnt loading the comments, so trying to find ball size for the machine, is it 5cm?

ABC Creations!

Yes, that is correct. - Adam | ABC Creations!

Liquid Pickle

Awesome thank you. It's printing amazing using the provided settings. Looking forward to finished product

AllThingsCute

Ohh great thats what i need so cute !

Stéphanie Thery

Bonjour, elle est trop mignonne ! Est ce qu'on pourrait me guider, je ne la trouve pas dans la librairie ! Merci beaucoup

ABC Creations!

Bonjour et merci ! Vous trouverez les fichiers en cliquant sur l'onglet « Shop » (Boutique), puis en ouvrant le dossier « Capsule Club July 2026 ». Il se trouve tout en bas et s'intitule « Sweet Paws Capsule Coaster V2.zip ». Veuillez m'excuser si mon français vous semble un peu étrange, j'ai utilisé Google Traduction :) – Adam | ABC Creations !

Stéphanie Thery

Thank you so much! 😊 I found the files, and I just wanted to let you know that the French translation is perfect! I also asked a question on Discord about possible support for Euro coins. I hope a solution will be available in the future. 😊

Kimberly Luxich

I have a question about the Gachapop machines. About what percent is the Lite version shrunk down too? I’m making the V2 shrunk down to 85% already, just wondering if the Lite is smaller than that?

HyBee's Hive

Hi! So the lite isn’t actually scaled down - it’s a redesigned machine to vend full sized capsules, but print on a smaller machine (A1 mini)

Kimberly Luxich

Ok then I’ll give that one a try next because I had to scale down everything to 85% to fit it on my AD5X printer.

Dani Raines

is there a place that we can purchase old designs?

Matthew Hardy

Is there any update on the Lite version yet?

ABC Creations!

Hey Matthew, I apologize that it's not up yet. Life got really busy suddenly. I hope to have time this weekend to finalize the lite version. Thank you! -Adam|ABC Creations!

Nanette Ramahi

I’m putting together the sweet paws machine and the spacer that are in the file are too tight for the knob shaft and the original spacer leaves the knob too loose can someone help me figure out what I did wrong?

ABC Creations!

Hi Nanette, I'll take a look at the file when I get home this evening and adjust those tolerances a bit if needed. If there was a change required I'll let you know. Thank you for the heads up! :) - Adam | ABC Creations!

Nanette Ramahi

I’m assuming the small spacer goes in between the machine and the knob on the front. but it goes on so tight I can’t get the knob on. Also should the knob be glued on?

ABC Creations!

I’ll check the tolerances this evening but it should be somewhat tight. There will be minor variations depending on the type of filament used because of shrinkage or expansion. If it just too tight though I’ll adjust it. Yes, the spacer goes between the knob and coin mech face. The handle is designed to be press fit but you can definitely add some adhesive as well if you like :) - Adam | ABC Creations!

Nanette Ramahi

Thank you! I think if their dimensions were swapped it would be perfect the spacer is too tight and the knob is a little lose I used sunlu petg on Snapmaker U1

Kimberly Luxich

Got the correct one (lite version) printed and I’m having a little issue I’m not sure to fix. The coin mech works fine out of the machine. When in the machine it doesn’t drop the coin, however if it’s only halfway slid down into place it works fine. Any ideas? I have a video that I could send if that helps.

DarkAlice

👉👈 so uhmm when will you do the lite theme of this one again? I may or not have been stalking for it. And I dont wanna buy the big machine to use this file as I have no need for big file. 😅 sorry to be a hassle. My 6 year old wants it badly

ABC Creations!

You know what? I am so sorry! This one kinda slipped through the cracks. I'll see what I can do about getting a Lite version uploaded by this weekend. Thank you very much for the reminder! - Adam|ABC Creations!

DarkAlice

Thank you. Can't wait to get it!!

Tvhawk

I hope that you got it figured out. My best guess is that you had one of the coin mechanism pieces upside down.

ABC Creations!

Hi Matthew, the lite version is now available. I apologize for the delay. -Adam