New Miniverse! - Little Monster Battle Arena! (Standard Tier) (Patreon)
Content
Download now at library.hybee3d.com and the "shop" tab under september downloadsSign in -> sign in with patreonSay hello to the latest addition to the HyBee’s Miniverse collection: The Little Monster Battle Arena!
These pair perfectly with the Gumdrop Pokémon Collection, available for free on MakerWorld (link), as well as the many additional creatures available through the Capsule Club. For the best fit, scale the Gumdrops down so their largest dimension is approximately 16–20 mm (around 50% scale, depending on the model).
Assembly & Printing Notes *IMPORTANT*
This assembly requires glue.
To embed the 8x2 mm disc magnets into the case, you’ll need to add a pause in your slicer.
The slicer will pause at the beginning of the selected layer, so be sure to place the pause on the first layer that covers the magnet cavity.
For sufficient holding strength, stack 2 magnets in each pocket, for a total of 8 magnets per Miniverse case.
Double-check magnet polarity before resuming the print! If the magnets are installed with Side A facing up in the bottom half of the case, they should be installed with Side B facing up in the top half. Taking a moment to verify polarity now will save you from having a Miniverse that refuses to stay closed later.
If you have access to a toolchanger printer, it is highly recommended for the Miniverse cases. Printing the case and accent colors separately can save a significant amount of time and material compared to traditional color swaps.
Happy printing!
– Hy B