Home Creators Posts Import Register Favorites Logout

Content

STL Files Here 

Watch Video Here 

Another Articulating Plant! This one turned out really lifelike. Took me a couple dozen versions to get it right. I made it while surrounded by 3 real pothos plants to try and get it to look as realistic as possible. Put this in a hanging pot, and it will look awesome! Make sure to cover the base with dirt to get an even more realistic appearance.

 

If you sell 3D Prints, these plants are great for...

A. Showing off your Plant pots

B. Upselling people when they buy a plant pot

C. Selling disassembled as "Kits" so people can build their own plant!

Assembly: (Assemble in this order for more realistic looking plants)

1) Insert Base into pot

2) Insert a few stems into the base holes

3) Cover with Dirt, or something that resembles dirt

4) Gently Fold and crease leaves, and insert into branches

5) Snap a few Short Branches into the Stems

6) Snap Long Branches into the Short Branches, repeat as many times as you want

Customizable:

This is a very customizable print. You can print out as many segements as you want to make a very large or very small plant. I have also included a few leaf types if you want to get fancy with multicolor printing

If you want, you can sell smaller version by including less pieces, or large ones with more for a higher price. Or even sell them as kits so customer can assemble them themselves!

Files

Comments

Crispycraftz

do you glue the pattern onto the leaf? i think i must be missing something

Gary Richardson

What filament did you use for this and the String of Pearls? It's a pretty natural looking green.

Tdubs

The Polyterra muted green by Polymaker is pretty close to that

Dan Poel

What Filament was used? It it PLA or PLA+ or PETG or TPU?

LayerusRex

Wow, this is such a sweet design! I am printing this on my Prusa MK4 with manual filament swaps for the patterned leaves as the MMU3 isn't ready for the MK4 printer yet. I am slicing this in Prusa Slicer, and to add the pattern to the leaves I just had to add the the leaf STL into my slicer and then right click on the leaf and select "Add part" to load in the pattern STL. I printed these at a .08 layer height and it's worked out REALLY well so far. I'm using Eryone Matte Black Forest Green PLA for the leaves and stems, and Duramic Marble PLA for the patterns on the leaves. I thought the marble color would be a little less bright white and more natural looking on the leaves - so far they are turning out great, I'm printing out plate after plate of them for my wife. Thanks for an awesome design!

Ben B

Do you have an stl for the pot?

Peter Mares

When I import the patterned leafs into Bambu it isn't asking me if I want to load as a single file with multiple parts. It seems to be only loading half of the leaf. Any idea why?

Peter Mares

I'm really struggling with this design, trying to make it as a gift for my friend. My current problems are: I keep loosing a ton of the stems and branches during printing. I got a few stems printed and they don't want to snap into the base. I set the profile to .08mm Extra fine in Bambu. Any other thoughts?

Sterling Anderson

Really cool design. Just started printing, but if anything it is forcing me to get my first layer dialed in perfect finally.

Kim Makal

Should the branches be snug enough to hold their position or are they very loose? My stem and branches snap together nicely, needs a good amount or pressure, but the joint is loose enough that the branch will swing freely. Is this normal? Or should I be resizing something?

Shawn Baird

I feel like i must be missing something because everytime i print this the leaves are paper thin and basically translucent. Looking at the image above makes it seem like the leaves should reach almost 1mm of thickness.

Shawn Baird

I think i figured it out... I think the problem was my filament. It must be practically transparent when this thin.