Faster forests, cars with their variants: EvoForge 1.1.49 (Patreon)
Content
Thank you for supporting EvoForge! On the track side, 1.1.49 is about frames per second in the woods: trees are now planted the way the factory tracks are, on converted AC1 tracks and on track builder tracks, for up to 60 % more frames per second at the most wooded spots we measured in game. It also brings fixes from a study of converted tracks next to AC1 with CSP, and three vegetation requests from Discord. The track builder's junctions lose their bumps and steps, and zones now keep their tunnels. When you host a server, you can now require the original parts of each car. Converted AC1 cars now come with their variants, as one car, and with their gear sets, final drives, CSP engine maps and optional bodywork in Customize. Convert your tracks again, or build them again, to get the new planting, and convert your cars again to get their variants and parts.
Trees planted like the factory tracks
Full trees where you see them, tree cards behind. The trees of the first row you see from the road stay full 3D trees, spaced like on the factory tracks. The trees behind them become the game's own tree cards: pictures of real trees that always face you. What costs frames is the number of full trees close to the camera, not the total, so the woods keep their density while the graphics card draws far less.
Measured in game at the most wooded spot of each track, same spot and settings before and after (RTX 5080, three screens 7680×1440, Ultra): Kičevo 59 → 87 fps, Col de Turini built with the track builder 59 → 89 and 60 → 95 fps, Le Mans 96 → 96 fps with a fuller forest behind the pits. At the pole, Brands Hatch converted from AC1 runs at the same rate as the factory Brands Hatch (96 and 95 fps).
No more green blobs in the distance. Distant trees on converted tracks could turn into green balls: their cards were set like trees instead of facing the camera, and an old card the factory tracks never use was still picked. Cards now face you and only the factory cards are used, which also cleans up the distant trees of every converted track.
The amount presets follow the new planting. Balanced now keeps every tree of the mod: on the nine tracks we checked, its tree limit no longer removed full trees, only tree cards that cost almost nothing. Light keeps its full first row and limits the tree cards (12,000 per 5 km of track). In Custom, the tree limit counts full 3D trees, and the extra ones become tree cards instead of leaving gaps.
Hills count: a tree hidden behind a crest, seen from the driver's seat, is not taken for the first row.
Bushes that have no draw distance of their own stop at 300 m (one climbing plant was drawn 1.5 km away).
Track builder: the same planting. Col de Turini goes from 48,302 full trees and 128,676 old cards to 2,402 full trees and 174,576 factory cards, for the same forest. A card that would be seen from too close becomes a full tree again, so the hairpins keep all their trees. In the editor's 3D view, tree cards seen from above lean towards the camera so the woods still read from the sky; in the game nothing changes.
Tracks already converted or built keep their trees: convert the track again (your settings are kept) or build it again in the track builder.
Vegetation requests from Discord
Balanced keeps the bushes and the tall grass. A mod's tall grass was counted with its bushes, so the bush limit removed both (Kičevo kept 236 bushes out of 6,000 allowed, it now keeps 2,855). Measured in game: no cost in frames.
A local limit in Custom: at most so many trees and so many bushes around any point of the road, with the radius of that area, instead of thinning the whole track for one or two dense spots. Measured in game on Kičevo with 750 trees: +21 % at the densest spot. Off by default.
Trees and bushes counted separately in the track's settings, and the count is now what gets planted (one track showed 793,727 "plants" for 139,143 planted). After the conversion, the report gives trees, bushes and grass on three lines, with how many the mod had when the amount setting left some out.
The draw-distance setting is gone. The game fades each tree and bush out at a distance built into its own model (from about 600 m to several kilometres for tree cards), so the value had no visible effect: setting it to 1 m changed nothing. The radius setting now says what it does: bushes and small plants within that distance of the track; trees further out are kept, as tree cards.
Converted tracks closer to AC1 with CSP
Rain on the whole track: track surfaces whose names read like a verge (green-painted run-off tarmac, painted concrete, cut kerbs), and racing dirt and ice, were treated as verge and stayed dry more than 10 m away from the tarmac. They now get wet like the track.
Walls, buildings and glass that a mod gave a road surface are no longer taken for track surface, and a material a CSP rain config only calls rough or smooth is no longer road.
CSP grass lists written with wildcards are now understood, as are their mesh lists and material filters: the grass goes where the mod's config puts it.
The grass colour of one config section no longer spreads over the whole track (sand and a road came out tinted like grass).
No more metal roads: some multi-layer road materials took a mirror-like reflection.
Textures at their real scale: a see-through multi-texture no longer repeats its picture up to 50 times, and textures with a UV multiplier are no longer stretched (a roof at Le Mans ×100, water at half its repeat).
Animated objects always find their own material, and on tracks with several layouts the rain and rubber map of each layout stays in place when another one fails.
Hosting a server: parts, apart from the setup
A new choice when you host: Parts. In Assetto Corsa EVO, the server's "tuning" setting is about the car's parts (engine, gearbox, kits chosen in Customize), not the setup. By default parts are left to each driver: everyone drives the car they prepared in Customize. With Original only, a car whose parts were changed is refused, and the driver reads why in the server chat, with the parts concerned. It works on any server, ranked or not; on a ranked server the Kunos server checks it as well.
Joining such a server from EvoForge takes the catalogue car, with its original parts, instead of a garage car whose parts may have changed. The server list shows an Original parts badge.
Setups and parts are now two separate choices. Before, Stock, enforced and a locked event setup also closed the server to tuning: on a ranked event server, the Kunos server then refused any car with changed parts, without the host knowing. The imposed setup is still held by EvoForge as before; parts are only checked when you pick Original only.
The host's dashboard counts the cars refused for their parts, with the remedy.
Track builder: smooth junctions, tunnels in zones
No more bumps or steps across junctions. On a hillside, some junctions threw the car up or had a small step, especially where two crossroads sit close together. Streets and junctions now share one smooth road profile: the slope changes progressively, as on a real road, and a junction follows the main street and stays as flat as it can across. Measured on the built road surface of our test zones, driving across every junction: sharp bumps go from 40 to 7 in the hills of Annecy and from 89 to 17 in Lyon, and on a junction reported in Savoie the straight line goes from a sharp bump and a 9 cm step to a gentle slope (1 cm). Build your zone again to get it; no new import needed.
Tunnels in zones. A street that went into a tunnel used to stop against the hillside. A mountain tunnel now has its tube, concrete walls and vault, a stone portal at each end, and the hill stays above it. A covered passage under a bridge or a building stays an open road, and the building above it is left out so you can drive through. A tunnel cut by the edge of the zone is closed by a wall. Import the zone again to get its tunnels: zones imported before did not keep them.
Converted AC1 cars: variants, gearboxes, engine maps and parts
One car with all its variants. In AC1 a car often comes as several cars: the BMW M3 E30 with its Drift and Step1 versions, the M3 E30 Group A with its Gr.A 92. Convert any one of them and EvoForge finds the whole family and makes one car in EVO, with its variants, like the factory cars. The car shown first is the one AC1 shows first. Each variant keeps its own mass, engine, gearing, setup, spec sheet and liveries, also once customised or added to your garage. You pick the variants to convert (all of them by default), and you can convert a single variant without the main car.
Every livery of every variant, each with its photo in EvoForge: 26 for the M3 E30 and its two variants. A livery whose AC1 skin has rims of its own now gets them, on every converted car (the black rims of the E30 Drift's DGFX livery, the dark grey and red rims of the McLaren F1 GTR), and Customize offers them as rim finishes, as on the factory cars. Livery names no longer show the sorting number of their folder ("0 Fina 7" is now "Fina 7").
Gear sets and final drives in Customize. Each gear set and final drive an AC1 car offers in its setup becomes a gearbox you can fit in Customize Vehicle (47 on the Mercedes 190E Evo II), and the car starts on the gearing AC1 gives you: 21 of the 312 cars we checked started on another one before.
CSP engine maps. A map that multiplies the power by a fixed amount becomes one of the game's own engine maps, in the car's electronics; a map whose effect changes with the revs (a tuned ECU, race fuel) becomes an engine part in Customize. The car starts on the mod's default map.
Optional bodywork. When a car swaps between two bodies in AC1 (an F1 car's mid-season kit, with its own wing), the other body becomes a kit in Customize: the car starts as in AC1, and the kit goes on and off in one click, in the car's livery.
Parts grouped by kind in Customize, engine then gearbox then the others, as on the factory cars.
Cars already converted keep what they had: convert the car again to get its variants and parts.
Known issues
On converted tracks, a few trees packed tightly behind the first row are left out (about one in six at Kičevo), where a card would be seen from too close and there is no room for a full tree. In game the look is the same.
In the track builder, a full refresh of a very large forest takes longer (Col de Turini, 177,000 trees: 6 → 11 s).
In a zone, an underpass that runs under a street or a square at ground level is still left out: it cannot be shown at street level.
A variant shares the main car's sound, gauges, lights, cameras and driving position (an EVO car has one of each); when they differ in AC1, the conversion screen says so.
On a converted car, a livery with no rims of its own shows the rims of the first livery, where AC1 shows those of the model.
Thanks again for your support. Feedback is welcome on the Discord: https://discord.gg/x3w7eCDFkK