Jun '24 Exclusive! 🎩✨4th of July (Patreon)

🔒 Archived 08/01/24 - You can get this file from Cults3D or MyMiniFactory.

-------------------------------------------

Hi! Today's release is another Holiday themed release in celebration of America's upcoming Independence Day! As previously mentioned, I am a holiday person! The 4th of July has always had good memories celebrating and having good times with friends and family. That being said, I wanted to design a little pack to celebrate the 4th. I know this may not be of as much interest to those of you outside of the US, but the firecracker and hat included in this pack could easily be painted and colored to reflect whatever theme your feeling! I hope you enjoy! 🎩✨

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models have been tested with Kailh Bronze, White, Jade and White V2 clickers and the White clickers are my preferred option. I have an up to date list of verified clickers with links you can find HERE. This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base (this is a destructive process).  A 7mm keyring file is included as well as a larger, 3.5mm diameter keyring hole to allow a beaded chain to be used!

This pack contains 2 different clicker designs each with 3 unique cap designs giving a total of 6 different clickers! There is also an Extra White configuration available for the caps to make sure those colors really pop!

3D Printing Settings:

Layer Height: 0.2mm (recommended)

External Perimeter (Outer Wall): 0.33mm (recommended)

Scale: 100% (Everything is modeled with tight tolerances and should not need to be resized)

Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat)

NOTE (flat clickers only): I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

Stars/Stripes (White)

Everything else (Blue/Red)

I've also found hitting the print with a heat gun right before the main body color starts printing will eliminate any little strings that can cause blemishes on the final design.

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

Stay Pawsitive! 🐾