Planter “Double Glitch” (Patreon)

A Planter inspired by old video games. It is a low poly, slightly crooked design to commemorate how things looked like in the early days. While oddly shaped the planter is very functional and fast to print with a lifted drainage for happy little plants.

Scaling / size

Upscaling (100% +): as big as you want

Regular size (100%): 193 x 128 x 131 mm – has a wall thickness of 2 mm

Smaller (80%): 154 x 102 x 105 mm – has a wall thickness of 1.6 mm

Minimum size (60%):  116 x 77 x 79 mm – has a wall thickness of 1.2 mm

Print settings

Required build volume: 200 x 200 x 140 mm

Material usage: 230 g

Print time: 13 h

Material: PLA

Print direction: stls are rotated correctly, check images

Support: none

Nozzle size: 0,4 mm

Line width: 0,4 mm

Layer height 0,2 mm

Outer walls: 3

Infill: 15%

Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

Licensing

Individual purchases, free downloads and and all memberships besides the tiers that specifically allow for commercial use are for personal use only! Make sure to fully read and understand the License