SEREV3d

👀💫 SEREV3D Printable Craft Eyes – Slit Pupil Version (PLUS a tutorial on how to fit them on ANY character!) (Patreon)

Published:

2025-08-08 16:38:41

Edited:

2026-01-10 22:48:24

Imported:

2026-09

Tags:

3d 3d print 3d printing 3mf MultiColor craft eye eyes flexi printable eyes stl

Content

This design is included in our Welcome Pack with a paid membership:

►Access the Welcome Pack here

-----------------------------

If you already have the files, here is all the INFO:

Say goodbye to expensive cabochon eyes 👋 and hello to the ultimate SEREV3D printable eye solution!The Slit Pupil version is officially live now too : easy to print, fully customizable, and looks amazing with both silk, or matte filaments.

👀 Whether you're printing cute flexi dragons, phantom imps, or your own custom designs, this set will make them pop with personality. You’ll be able to swap out those pricey glass cabochon eyes, no more waiting weeks for shipping, or being stuck with the wrong size or color.Choose your favorite style, print it, and easily insert it on any design with a tiny drop glue applied on the back of the eyes!

👁️Tons of eye options included:• Multiple pupil styles• Oval or round shine styles• Adjustable pupil position + size• Default 10mm scale (easily resize: 6mm = 60%, 8mm = 80%, 12mm = 120% etc.)• Multicolor 3mf and single color versions in stl format• Fits ANY of our Serev3D designs with hollowed eye versions (or your own models, tutorial is OUT NOW!)

Check out our quick tutorial on how to hollow out the eyes to fit any character:

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Recommended print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in each version’s 3mf files)

- Layer height: 0.08mm-0.1mm ( this small layer height is recommended, especially for eyes between sizes of 6mm-12mm)- Wall loops: 2- Infill: 7%, Gyroid- Supports: No supports needed(Don't forget before printing: wash your plate well with dish soap and warm water and dry it with a clean cloth, to get the best adhesion on your print plate)

We recommend first to print only 1 eye and fit-test on your design. If the eye is slightly too tight or too loose, just simple scale it up or down with 1-2%, to get the best fit on your models!The default eyes at 100% scale are 10mm diameter, so it's super easy to change the size to your needs:A few quick examples we recorded on our Round Pupil versions:

🔥 Want to print a batch of 100 eyes? Takes around ~3hours and costs only ~$0.60. No more waiting weeks for limited glass eyes!

🖱️ Right-click on object > clone > type your quantity — done!

💡Perfect way to give any character a whole new personality -

Check out our tutorial on how to hollow your own models to fit them!

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️