General Chat
Hi!
That kind of color bleeding is often caused by moisture in the filament. Drying the filament can help a lot with this.
We use filament dryers, which are basically small heated dryers made specifically for keeping filament dry before and during printing. 💛
I’ll try that thank you , I’ve got a couple of dryers
This message was deleted.
Hi! 😊 Are you using one of the standard Bambu Lab profiles on your H2C?
For these models, we use supports only on critical regions, and we set the top support interface to 5 layers.
Also, on the Ladybug and Bumblebee, did the posts print with supports around them, or did the post itself just come loose/fail during printing?
That will help us understand exactly what happened and what setting might need to be adjusted. 💛
I just opened your file & printed it as is i did add a brim for the just in case. Im printing on cryogrip frostbite plates. I reprinted again on h2c & this is today’s print. The bumblebee printed perfect I did not add any supports so unless they were original to your file then I’d say there weren’t any. Is the top support interface already on in your file? If not then no I didn’t do that. I’m happy I got one of them but any other help is appreciated
I saw a post a few back where someone said the first lay of the x post was missing could this be the issue here? would that cause it to air print the first layer & then all of them be off? I would like to be able to print to sell these & im going to not worry about tomorrow market day but Tuesday is our really big sale day so if anyone has any ideas please just let me know & thank you
I am sending you a Direct Message about another issue. thank you
I guess I cant send direct. Soo apparently my laptop had a fatal error & I have now lost unkown amount of GB of files from all of of my Patreon memberships & MakerWorld. I bought a 14 TB external BackUp Drive per Geek Squad recommendation, but I need to download files & I need to know if I have permission to do this for your group. I will be asking this in all of my groups. If you choose to say no, that is your right & Ill just move forward with what comes in the future. Thank you
Hi! 😊 Of course, no problem at all!
As long as your membership is active, you’re welcome to download and back up any of the files you have access to on your external drive. 💛
The only thing we ask is that the digital files are kept for your own use and are not shared, redistributed, or resold to anyone else.
Sorry to hear about your laptop — hopefully you’re able to recover or rebuild your collection! 😊
About the printing issues you were having, based on what you described, it looks like it could be a bed adhesion issue.
Since the small connector/post in the middle is coming out defective, it may be coming loose from the build plate during the print. We’ve had this happen to us before too.
We’d recommend giving the build plate a really good clean. Usually we wipe ours with isopropyl alcohol, and when adhesion is being stubborn, we wash the plate with water and dish soap and avoid touching the printing surface afterward.
Hopefully that helps! 💛
Hello Cute Click folks,
I am new to this page. I have Bambu P2S, using 0.4mm nozzle. Do I leave the default settings and slice? I also have a 0.2mm nozzle but that seems to take way too long. I tried a few prints but the eyes bleed, I am the AMS 2 Pro, with Polymake PLA. The filament is dry.
If your filament bleeds it could be because it is nor purging enough or could also be that the filament is not as dark as like if it happens to black and yellow or black and pink
Hi. Were we supposed to have more releases for August? I read on the bio that said 1 set per week but in August I only see the banana driver and the macaron heart box. Just wondering if I missed something or if what it says in the bio hasn’t been updated
Hi! 😊
Yes, we’re currently working on a new Halloween collection! 🎃💛 It ended up taking us a little longer than expected because we needed to make some adjustments to get everything right.
We’re finishing it up now and should be able to release it very soon! Thank you for your patience! 🥰
This message was deleted.