🩷Monday MagBuddy Drop! Gorilla🦍 & Chimp!🐒(archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

Happy Monday, Misfits!

Meet Gorilla, I called him Gordon😄 — big, broad, and secretly the softest guy in the jungle. He looks like he could bend a tree in half, but really he just wants a hug and a snack.

And Chipper the Chimp — the little instigator with the curly tail and the "who, me?" face. He's the reason they're both late, banned from the fruit stand, and grinning about it.🤣

Both are ready to print this week, hidden magnets and all — so they'll happily swing onto your fridge, your desk, your toolbox, wherever there's metal to grab.

Yours to keep and yours to sell, as always — your commercial license is active as long as you are. Print them, sell them, and if anything trips you up, hop into the community chat or message me directly. I'm always around.

As always settings are listed below!

Happy Printing Everyone! 💛

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. Subject to change in the future as more members switch away from purging printers.

Material: PLA

🎨Filament Used:

Chimp Fur:

https://amzn.to/4w4GhCa

https://amzn.to/4fwZ82K

⚙ Quality

• Layer Height: 0.16mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time).

💪 Strength

• Walls: 3• Infill: 10%• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 10• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.24• Bottom Z Distance: 0.24• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.