🩷Monday Magbuddy Drop! Sweet & Sour Devil Dragons!😈👿(archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

I couldn't wait for October — so we're kicking off Halloween a little early with two little devil dragons who are absolute opposites.

First up, the Sweet Devil Dragon — arms out, big goofy grin, ready to give you a hug or possibly steal your candy.

And then there's the Sour Devil Dragon — arms crossed, side-eye locked in, thoroughly unimpressed with all of us.

One quick heads-up on the grumpy guy: he can be a little tricky to get standing just right — but totally doable, so don't give up on him! A little patience and he'll hold his pose like the moody little demon he is.

Both are ready to print now, hidden magnets and all. Perfect little kickoff to the spooky season. 🦇

Happy Printing Everyone! 💛

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. Subject to change in the future as more members switch away from purging printers.

Material: PLA

🎨Filament Used:

Sour Devil: https://amzn.to/4b4jxKd

Sweet Devil: https://amzn.to/4wTb4lo

⚙ Quality

• Layer Height: 0.12mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time).

💪 Strength

• Walls: 3• Infill: 5%• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 20• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.28• Bottom Z Distance: 0.28• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.