🩷Monday MagBuddy Drop: Dolly the Dairy Cow🐄 (archived) (Patreon)

🚨 This model is now ARCHIVED and no longer available for download.

Say hello to Dolly — the sweetest little troublemaker in the whole pasture. Those big golden eyes? Pure innocence. That little bell around her neck? So you can hear her before she gets into the flowerbed.

She's got the classic black-and-white spots, the softest pink nose, and a face that says she'd follow you anywhere… especially if you've got snacks. She's ready to print now, hidden magnet and all, so she can plant herself on your fridge, your desk, or anywhere she can keep an eye on the kitchen.

Now, one important reminder while I've got you here 👇

All 9 of July's MagBuddies archive in 5 days. Once they're gone, I can't re-send them — so if you're a paying member, make sure you get every July model downloaded and saved somewhere safe this week. Don't let them slip away!

And if you've been on the fence about joining? This is genuinely the best week to do it. Here's everything you walk in with:

🐄 All 9 of July's models (before they archive)

🎁 The 20+ model welcome pack, instantly

🎃 August Drops — and we're kicking the month off with Halloween Classics (they're so good)

🏷️ A 50% off coupon for our archived models on Cults3D — grab the current code from the pinned post, it changes monthly!

New Buddies drop every single Monday, so your collection just keeps growing from here.

Questions before you jump in — or need a hand with anything? Hop into the community chat or message me directly. I'm always around.

As always, settings are down below if needed for reference.

Happy Printing Everyone! 💛

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.These are the ones we use→ https://amzn.to/46b4go9🩷If you prefer no magnets, simply delete the pause and let it run through!

Printers Used:Bambu Lab A1, A1 MINI / P1 Series

Snapmaker U1/Creator 5: While we print with these purgeless printers, all files are saved as a Bambu files and individual settings may need to be manually entered for other Orca slicers. Subject to change in the future as more members switch away from purging printers.

Material: PLA

⚙ Quality

• Layer Height: 0.12mm... (The smaller the layer height, the higher the quality. This is your choice. We use .12 to .16, 99% of the time).

💪 Strength

• Walls: 3• Infill: 10%• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200mm/s• Inner Wall: 200 mm/s• Sparse Infill: 200 mm/s• Internal Solid Fill: 200 mm/s

*Top Surface: 200mm/s (100 if using silk filament); otherwise 150 to 200 is good• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree• Style: Default• Support Angle: 10• On Build Plate Only: Yes-->> Critical for supports to NOT fill your magnet hole• Top Z Distance: 0.28• Bottom Z Distance: 0.28• Base Pattern: Hollow

🔧 Other Settings

• No Brim• Purge into Object Support: No• Flush Multiplier: 1.3x

💖 All settings are suggestions.

These are the settings I personally use and recommend to achieve the quality shown in my photos. However, every printer and user is different, so feel free to modify them as needed to best fit your setup and printing preferences.

💬 LicensingThese files include a commercial license for active 3D Misfits patrons. You may print and sell physical items. Redistribution, reselling, or sharing of STL files is strictly prohibited.