Ryuk (Death Note) (Patreon)

👉 Download the Premium Model - Click Here!

Important: This model requires a multi-color printing setup to achieve fine details. Included in this package are pre-colored, ready-to-print profiles for both Bambu and Snapmaker machines, making the printing process simple and straightforward.

I recommend the Snapmaker U1 3D printer as that is the printer I used for this model. If you are planning to purchase one you can get 5% off using my referral link. Make sure to click the link below and enter PLAY_CO during checkout so the discount is applied.

[Purchase the Snapmaker U1 3D printer and save 5% - click here!]

"Humans are... so interesting."

Bring the iconic Shinigami of the human realm to life with Ryuk from Death Note! Sitting atop a detailed Gothic Skull Throne Base holding his prized red apple, this model features his sprawling feathery wings, leather outfit, metallic chain accents, and terrifyingly iconic grin. It's a classic anime masterpiece that is sure to stand out in any collection or 3D printing setup.

Multiple Ways to Display Ryuk!

Bring the iconic Shinigami from Death Note to life with three display options:

The Full Display: Build the complete set, featuring Ryuk’s massive, menacing wings and an imposing skull throne base.

Winged Ryuk: Non need to print the Skull Throne. Print Ryuk with his wings and pose him on the edge of your shelf for a dramatic, eye-catching display.

Compact Ryuk: Prefer something smaller? The wingless version offers a more compact display while still capturing Ryuk’s sinister look and unmistakable personality.

Note: Removing the wings reduces the weight at his back, making this version slightly more prone to tipping forward - make sure to secure him to his throne or apply sticky tape if placing him on the edge of a shelf.

Dimensions:

At 100% scale, the complete Ryuk statue stands approximately 18.5 inches (470mm) tall from the shoes to the tips of the wings, and 19.7 inches (500mm) tall including the base. Scaling up most of the parts works fine, but the wings and the base may not fit on standard print beds and will need to be re-fitted or split. Conversely, scaling down can tighten tolerances and reduce multi-detail clarity on multi-color parts, and some smaller sections may require a 0.2mm nozzle to print cleanly.

Colors Used:

Bambu Silk Plus: Silver

Bambu Matte: Black, Yellow, Dark Chocolate

Bambu Basic: Maroon Red, Light Grey, Dark Grey

Print Profile:

Two print profiles are included: one for Bambu printers and one for Snapmaker printers.

All multi-color parts shown in the photos were printed using the Snapmaker U1.

Below is a breakdown of the multi-color parts for a standard Bambu AMS system and the Snapmaker multi-tool changer:

Snapmaker U1 (Tool Changer)

Skull Base: 21Hr 30m | Filament used: 714.97g

Rock Base: 12Hr 39m | Filament used: 615.86g

Body (No Wings): 6Hr 42m | Filament used: 132.26g

Body (With WIngs): 6Hr 53m | Filament used: 134.21g

Arm & Hands ( AMS parts): 2Hr 33m | Filament used: 37.64g

Waist Wrap: 3Hr 17m | Filament used: 53.18g

Arms, Legs & Shoes: 3Hr 13m | Filament used: 88.90g

Wings: 9Hr 47m | Filament used: 153.79g

Head: 4Hr 2m | Filament used: 49.38g

Bracelets, Belt Buckle & : 22m 39s | Filament used: 2.38g

Apple: 26m 4s | Filament used: 6.17g

Bambu P1S/X1C (AMS)

Skull Base: 1D 8Hr 31m | Filament used: 898.47g

Rock Base: 15Hr 52m | Filament used: 595.81g

Body (No Wings): 14Hr 56m | Filament used: 261.91g

Body (With WIngs): 15Hr 02m | Filament used:262.75g

Arm & Hands ( AMS parts): 6Hr 10m | Filament used: 106.63g

Waist Wrap: 10Hr 09m | Filament used: 168.61g

Arms, Legs & Shoes: 2Hr 26m | Filament used: 93.49g

Wings: 8Hr 38m | Filament used: 188.10g

Head: 12Hr 05m | Filament used: 190.40g

Bracelets, Belt Buckle & : 24m 13s | Filament used: 2.59g

Apple: 32m 6s | Filament used: 9g

Assembly Steps:

Attach the shoes to the pants.

Attach the pants to the waist wrap.

Attach the lower base section to the main body.

Attach the skull bracelet to the right hand and forearm, then attach the right arm to Ryuk's main body.

Join the upper and lower parts of the left arm together, slide the bracelet on, attach the hand to the arm, and finally attach the left arm to the body.

Attach his head.

Join the upper and lower parts of the wings together, then attach the wings to his body.

Seat him on the Gothic Skull Throne Base, your model is complete!

Thank you for printing this model and for supporting Playco Fusion. We’d love to see your finished print, so be sure to share your photos!