👉 Download the Premium Model - Click Here!

Important: This model requires a multi-color printing setup to achieve fine details. Included in this package are pre-colored, ready-to-print profiles for both Bambu and Snapmaker machines, making the printing process simple and straightforward.

This is a super colorful print! Because of the multi-color swaps, we highly recommend using a faster machine like the Snapmaker U1. If you're running it through a standard Bambu AMS, expect around 3 days and 6 hours with about 1,340g of filament just for the body with spots. Prefer a simpler route? We've included an optional single-color body so you can paint the spots yourself or get creative!

I recommend the Snapmaker U1 3D printer as that is the printer I used for this model. If you are planning to purchase one you can get 5% off using my referral link. Make sure to click the link below and enter PLAY_CO during checkout so the discount is applied.

[Purchase the Snapmaker U1 3D printer and save 5% - click here!]

Bring the bizarre fun of Killer Klowns from Outer Space to life with this 3D-printable Fatso figure! Fatso is captured in his classic creepy-clown look, proudly wielding his iconic cotton candy gun. Designed as a fun display piece for fans and collectors, this model combines the goofy appearance of a carnival clown with the unmistakable horror aesthetic of the Killer Klowns universe.

Whether you’re adding him to your collection, painting him up with your own color scheme, or displaying him alongside other Killer Klowns, Fatso makes for a fun and eye-catching 3D print.

Dimensions:

At 100% scale, Fatso stands approximately 9.84 inches (250mm) tall. Scaling up should work fine, but scaling down may tighten tolerances and make the multi-color parts less detailed.

Colors Used:

Bambu Basic: Hot Pink, Turquoise, Yellow, Red, White (Gun), Cyan, Green, Cobalt Blue, Purple

Bambu Matte: Bone White (Skin), White (Body), Sky Blue

Print Profile:

Two print profiles are included: one for Bambu printers and one for Snapmaker printers.

All multi-color parts shown in the photos were printed using the Snapmaker U1.

Below is a breakdown of the multi-color parts for a standard Bambu AMS system and the Snapmaker multi-tool changer:

Snapmaker U1 (Tool Changer)

Collar: 4Hr 7m | Filament used: 67g

Head: 2Hr 22m | Filament used: 37g

Body: 20Hr 40m | Filament used: 356g

Hands: 58m | Filament used: 15g

Gun Main: 47m | Filament used: 11g

Gun Circle: 17m | Filament used: 4g

Gun Circle: 17m | Filament used: 4g

Gun Front: 25m | Filament used: 4g

Gun Mid: 14m | Filament used: 3g

Gun Handle: 24m | Filament used: 5g

Gun Spine: 7m | Filament used: 2g

Bambu P1S/X1C (AMS)

Collar: 15Hr 33m | Filament used: 261g

Head: 8Hr 9m | Filament used: 133g

Body: 3Days 6Hr 15m | Filament used: 1339g

Hands: 2Hr 48m | Filament used: 56g

Gun Main: 4hr 6m | Filament used: 83g

Gun Circle: 17m | Filament used: 4g

Gun Circle: 50m | Filament used: 14g

Gun Front: 1Hr 53m | Filament used: 25g

Gun Mid: 27m | Filament used: 7g

Gun Handle: 1Hr 30m | Filament used: 25g

Gun Spine: 17m | Filament used: 5g

Assembly Steps:

Attach the shoes to the body.

Attach the hands to the body.

Attach the hair and nose to the face. Then attach the face to the collar, followed by attaching the collar to the body.

Press the handle firmly into the gun, then attach the spine on top.

Insert the gun pin and attach all remaining gun parts. Finish by gluing the yellow tip into place.

Place the completed gun into Fatso’s hand, and your model is complete!

Thank you for printing this model and for supporting Playco Fusion. We’d love to see your finished print, so be sure to share your photos!