Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

I had to travel for work to a training conference and then work all last week. Many late hours and no time to post here. I've thought about bringing the Fabrikator Mini with me but I never have any time to use it at this particular conference which happens every year, so I don't bother. I'm back to normal and spent last night firing up the printers and getting some things started. I frankly have to get rid a few printers so I'm deciding which ones stay and which ones go. About half of them were donated and the other half I bought.

I still am evaluating the ROBO3D. I've had a lot of help from Patreon supporters. Neil Phillips even sent me his Simplify3D setup to try along with a few others who offered help. I appreciate the tips. In the end I found I am getting the best results with the MatterHackers T10 tablet controlling the printer.

I prefer to slice on the computer and then send it to an SD card and control the printer from the LCD. The ROBO3D doesn't include an LCD. It is an easy option to add, and I did that when I first got it, but I was not getting the Z-Axis to adjust properly no matter what I did to the slicing setup so I removed it. (I stole the display from the Tevo Tarantula).

 The ROBO3D I have uses an auto-leveling routine that I just don't like. I guess I don't like auto-level in general as the Wombot that Joel Telling sent me a while ago also has auto-leveling and I found it to be a pain as well. I just prefer manual adjustment. The Wombot still offers manual adjustment in addition to the auto-level but the ROBO3D does not. Getting that first layer to stick properly is so important and this printer doesn't always do that well. I have seen a lot of people get great prints from this machine but in most cases it was with the pre-auto level versions. 

I was sent the T-10 Tablet by Matterhackers.com to evaluate and since ROBO3D recommends their MatterControl slicing software, the T10 is a good match since it runs MatterControl. It also seems to slice the file perfectly for the auto-level setup as I get better results with the tablet than anything I got with Simplify3D or MatterControl on the computer. I did have some luck controlling the printer my computer through the USB connection but that just tied up my computer from doing other projects. The T-10 tablet allows me to both slice the file and then control the printer like an SD/LCD setup would.

The T-10 is a tablet so I can open Thingiverse.com and download files. It also has features such as a camera and the ability to send me text and email messages when a print is done. You could consider it a high priced Octoprint controller.

I hope to have a full evaluation soon of the ROBO3D. Frankly, I have so many failures with the ROBO3D printer that I don't have a lot of faith in it so I don't use it as much as I though I would. If it was my only printer, I'm sure I could work things out and get it setup the way I like but I'm spoiled now. I have so many choices and frankly, the Mini's (Fabrikator and Select) along with the FlashForge Dreamer do 90% of my printing. Even the Makerfront, which has given me good results most of the time, is not being used as much. It's developed some kind of heating problem mid-way through a print and I get a flashing LED on the Arduino shield that I cannot figure out what its trying to tell me. Since that printer almost caught on fire, I have less trust in letting it run larger prints. 

I'm trying to incorporate more Electronics into my channel and I really like the size of the Select Mini. It has a build area that is big enough for most of the cases I want to print for my electronics. And at $199 it can easily be added to any electronics bench. That's cheaper than an oscillosope. For those occasional larger prints, I have the dreamer which has been incredibly reliable and produces great prints. 

So that is the update for now. I'm printing some conductive filament test strips on the Dreamer to see if I can better conductivity than I did before I travelled. I found I had the temp too high and printed too fast in my early attempts. Hopefully the new low temp and slower settings will give me better results. 

Files

Previews only

Comments

Anonymous

I have the same issues with my Robo3D. I think they added the auto level to combat the rather flimsy bed setup. I too have grown to hate it as you can't use any other slicing program also you can't use Buildtak, found that out the hard way.

elproducts

Thank you David. I was beginning to believe it was only me. I agree on the Buildtak as well. I tried it and the heated nozzle required for the bed level stuck to the Buildtak and froze. It's the only printer I have that doesn't allow me to use Buildtak or similar.

Anonymous

I bought my lcd controller from printed solid. It was setup for the robo already, I plugged it in, inserted sd card and printed. Worked fine.

elproducts

The LCD/SD card worked fine but the Z offset in the GCode files was the issue. I tried multiple settings in the slicer but could not get the first layer to stick well. So I dropped the LCD and started using the T-10.