Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

This Set is from a previous month, but you can still Buy the STL in our Shop.
Sorry for the delay, we are waiting MMF to approve our last upload.

  •  We release Patron's Only DISCOUNT CODES each month, they are active from day 1 to 10 each month! Check our last release or poll. 

Renders and Descriptions of the Characters

6+1 Scourgeland Survivors (modular)
Facing thousands perils, from the Zeek to the Tyrant-God Ashen Alfar, the fierce people  of the Scourgeland adapted to live as nomads in this desert of ruins and dust. These hunters are equipped with protections and weapons made from Zeek chitin, carved from the giant arthropod that infest this cursed lands.
With the modular balljoint system and many weapons you can use these survivors for any purpose, from thieves, to hunters, to bandits, to caravan guards... have fun!
We even included some chitin hand-crossbow or guns for the scifi enthusiasts!

Hiro Dustwalker (modular)
Hiro Dustwalker is the high hunter of the tribe, collector of Zeek heads and master at crafting Zeek Chitin weapons. During a caravan guard duty he and his companions had been eaten alive by a gargantuan Zeek worm. He has been the only one to get back alive to the camp, opening his way out of the monstruosity's stomach with a sharp iron knife, a rare heritage of his ancestors.

Nanaari the Wise Woman (modular)
Scourgeland human tribes are lead by wise womans, who knows the secret of these cursed lands and all its perils. Nanaari the Wise Woman, now at the surprisingly age of 103, is the one who teach the children how to survive and to use Zeek materials. In battle, she's not only an excellent warrior with her staff, she's also capable of casting shamanic and healing spells. Nanaari is the only human in the Scrourgeland who managed to naturally tame a Zeek Blade, one of the most cunning and dangerous predators of the desert. 

Lara the Dancer & Scourgy the Zeek (Fantasy Pinup)
Even the Scourgelanders need to sit back and relax from time to time, have some sweet dates or enjoy a spicy Zeek-Eggs liquor at the sub-terrain taverns.
Lara is one of the fiercest hunters at the tribe, but when she's not hunting twisted Ashen Alfar or ferocious Zeek in her chitin armour, she loves to perform at the subterrain Tavern as a pole dancer. As strange as it might seems, Lara can't be separated from Scourgy, a little Cellar Scourge Zeek.

Battle-Prawn Zeek (and Mounted Heroes)
Before Nanaari, no one ever tamed a Zeek Blade. These lethal predators of the ashen desert are highly territorial and aggressive. It is said that the wise woman found a surviving Zeek Blade in its larval stage in a cave, with the rest of it's family burnt down by Tialevor's Ashen Alfar. It was in that moment that Nanaari realized how every life is important, and decided to save the larva, raising it like a member of her tribe. Afters years and several molts, the Zeek Blade known as Battle-Prawn is now a fierce and loyal toward Nanaari and Hiro Dustwalker, a precious ally against the Ashen Alfar raiders.

Subterrain Carapace Entrance
In the Scourgeland nothing get wasted. The giant carapaces of the dead Zeeks are often used as shelter from the people of the desert. Acting like tents and houses, these shells are even entrances to subterrains mini-cities or taverns.

  • Scale As always the release scale is 32mm (for the avarage human), but some creatures like Ogre can be much bigger. People who play at 28mm scale usually scale down our models to 90%, but we encourage you to test them at full size. 32mm It's becoming pretty common and it gives better result on 3d print!
  • Modular Models Our regular models and heroes are balljointed wrist miniatures with various weapon options, perfect to create your custom hero, your Wargame warband/army or your perfect rpg encounter. You can mix most of the parts with our previous releases!
    We prefer to give you each month the tools to make your perfect models, no need to make clones and clones with the only difference being a weapon. 

Have you Joined our communities?

What's the best place to receive quick WIP updates, share opinion and feedbacks on these models and ask for help? Partecipate to painting competitions and join with thousands of friendly members on Discord and Facebook:

Files

Previews only

Artisan Guild Patreon - Scourgeland Survivors Set - June 2020 Release

https://www.patreon.com/ArtisanGuild Here the video trailer of the June 3d Printable release at Artisan Guild Patreon, the Scourgeland Survivors Set! Scourgelands, Ashen Era. This place was called the Great Arverian Wood centuries ago, but things suddenly changed. Here, the struggle between the forces of good and evil has already taken place. This Set will is composed by an assortment of Scourgeland Survivors, people who adapted to live as nomads in this desert of ruins and dust, equipped with armors and weapons made from Chitin, carved from the giant arthropod that infest this cursed land, the Zeek. The tribe is lead by Nanaari, the Wise Woman who teach the children how to survive, capable of casting shamanic and healing spells. Hiro Dustwalker is the high hunter of the tribe, collector of Zeek heads and master at crafting Zeek Chitin weapons. The set includes: 7 Modular Scourgeland Survivors (swappable weapon options); 2 Epic Heroes (also Modular): Nanaari the Wise Woman and Hiro Dustwalker. 2 Mounted Heroes (Nanaari and Hiro on a large Zeek); 1 Standalone Beast: Battle-Prawn the legendary Zeek Blade. 1 Fantasy Pinup and his little companion: Lara the Dancer and Scourgy; 1 scatter Terrain building, the Subterrain Carapace Entrance. Join over 5770 Patrons at Artisan Guild to receive extraordinary 3D Printable Miniatures to print at your home every month! https://www.patreon.com/ArtisanGuild Or buy the stl files of our previous releases on our store: https://www.myminifactory.com/users/Artisan_Guild

Comments

Sylvaria Malice

So stoked to get these amazing sculpts going!

Eyn Ergy

Marvelous job here

Marshall Ladd

Great work as always. Love this set and the EOT freebies are amazing.

Lord Chronos

I know it is not and easy question to answer, but I'm thinking about buying the amazons in MMF and after the latest news I'm not sure if I should wait for them being offered in a complete pre-supported pack. Do you think they will be added in the near future? If they are pre-supported will these miniatures we buy now be updated with that feature?

Anonymous

Been attempting to download the files for the last 10 minutes. Hasn't even started yet. Still on "Calculating size - please wait"

Anonymous

When do we get the Ashen Manticore? I supported towards the end of may so idk if I count to get it

Comrade_Wulfil

Hey Rein. I think it is a issue with Sync.com, I'm having the same issue with another Patreon link.

Sylvaria Malice

Great question. I am also curious as to how these are going to be bundled and pre aupported. I already own all the amazons released prior, but it would be great to get the supported versions as well!

Dean

the calculating all doesn't work, the only way to download is to go to each of the files and download individually, i have messaged them to let them know.

Anonymous

the amazons on my mini factory are supported? *.*

Dean

the download all is working now. :-)

Anonymous

The Oni I printed last month seem a bit big. Are these 32mm scale? Can someone suggest a scale factor to get them down to 28mm please?

Chris Carter

Artisan Guild suggest it themselves at the end of the post. However the Oni may have been bigger than expected as they are all based on Orcs or Ogres.

Matthieu Marino

The modular survivors are either empty or not supported in the supported folder.

Local .Guide

87% is the 32mm to 28mm that I have tried. Oni are larger since they are ogrish size

Michaelovic

There is only 6 Scourgeland Survivors A-F. Where is number 7?

Charles Erwin

I am getting error path too long and not all extracted on the Jun set and the extra one

Anonymous

I'm not finding the Ashen Manticore, could someone direct me to it please

Anonymous

Do we know if the Ashen Manticore will come with a pre-supported option?

Anonymous

I’m curious if any of the older sets are also part of The Ashen Throne.

VAK

im 99% sure that support is support. They took your money in may, even if it was the day before the month ending. You supported that month. someone correct me if im wrong.

J-Zarno .

They are all part of the same universe but the ashen throne is a theme/setting within that universe, so maybe some are

CURTIS CRADDOCK

One point on the English translation. When you say the "last" batch of Amazons I think you mean the "latest" batch of Amazons. "Last" implies there won't be any more, "Latest" implies "most recent" or "current".

Anonymous

How i get the loyaltie reward?

Benjamin Engl

Look in the Survivor C Folder. There is a version with and without helmet. the one with the helmet is mirrored in the Preview Pic. Thats number 7

Glitterwolf

Just bought those amazones 50% off is too good a deal for those lovely fighting women.

Nicholas Kefalas

Not to be ungrateful for the supports, BUT Chitubox for Elegoo Mars pro uses a different format. Should you not be using the latest format ??? The Saturn is also going to be using the new format. You may want to consider creating these to the latest format.

Anonymous

You get STL files in addition to the chitubox files, and either way they're not sliced. Chitubox will slice and export to the file format your printer needs once you define it in the settings.

Joshua Grandt

Last actually has another definition that means "most previous" The last batch of amazons released a little while ago but it wont be the last as the next batch is coming soon enough. The last Marvel film I saw was alright, but it wont be the last I see.

ArtisanGuild

Yes please use the STL if the chitubox file :) its in the same folder

Pandaxsaurus

Ok new subscriber here, but the ball joints, are those made to just snap in or do you still have to glue them?

Anonymous

I hate to be "that guy", but i printed modular survivors A and B, and some of the supports are kinda iffy. Most notably, on the gun and crossbow, the supports are WAY too close to the model. Both the top and middle sections of the supports. I get that the light supports are supposed to be close to the model or else they thin out too much and can't support much, but in some places it really could have benefitted from even 1 mm of extra distance. Having the models pre-supported really saves a lot of time, so they're still worth it. Just something to watch out for.

jose muñoz

in love with the bases, but the game i play use square ones ^_^

Anonymous

So Im having an issue with not being able to unpack the zip files with "supported" in the title. says its too long of a file name. Is that just with 7zip maybe?

Anonymous

https://cwestblog.com/wp-content/uploads/2014/10/circles.png Using the above diagram, you can see that if you resize the circular base, so that the corners of the square base you want touch the edge of the outer circle, then crop into a square, you will have a base of the same size category as the original, but a square. There also shouldn't be any problems with placing the figure on the base, since the surface area is a bit larger than the original.

Anonymous

maybe try unzipping closer to the root of whatever drive you're using? There's a max path length (the number of characters of a file + the number of characters of every folder leading up to that file) in some OSes. Moving the zip closer to the root of a drive reduces that number, meaning it's more likely to be less than the max length and unzip properly.

Josiah Blackie

Unpopular opinion - the guy in the craine pose is the coolest

Anonymous

Whenever trying to open a chitubox file from only this set i'm getting the error: "The suffix chi is not supported. Please ask the device vendor for the relevant suffix plugin." and am unable to open it. Edit: fixed the issue. Problem was I had extracted it with 7zip which was causing the error somehow, but extracting it with w10 onto my desktop worked without issues.

Efesto

So awesome! When the Manticore will be relased?:D

Daniel Rivera

When we gonna see a mini based on Greg?? Haha

Logician

Thats why they give you the chitubox file so you can make all the little corrections you prefer yourself.

ResinandFilament

cant unzip the files, getting an error that the file names are too long

Anonymous

Hey, you can try changing the name to make it shorter? or it may be problem, if the item you are unzipping is in a folder, within a folder, within a folder etc. because the "address" (where your file is located on your computer adds up to be too long. It might not be the file name being too long in itself.

Dave Blanchard

Gotta say I'm not that impressed in the bases released with this release. Most of them are specific to the model and have blank spots for them to be attached....I usually like to use bases I get with these sets with other models...

Michael Brown

having trouble getting the files to zip for download. anyone else having that problem?

Matt S

Same issue. But I think it's on Sync's end as I am having the same issue with another Patreon's release.

Kevin Vanwinkle

I REALLY love these minis! Are you guys planning to do monsters of the Underdark? I would love to see more of the Zeeks! no matter what thank you guys for your hard work on these :)

Marshall Ladd

Amazing models and great supports from Greg. Got the mounted Hiro set, minus the base, on a single plate, sliced and through photon file validator in less than 5 minutes, and to my printer. Can't wait to paint these for my next DnD session. I'm using them as Cultists in the Underdark in my Out of the Abyss campaign.

Milo_Jones

Having some issues extracting the Zip files after i download it, its stopping at 58%. I deleted it and downloaded again and still having the issue of "path is too long" Anyone having this issue and able to help me out? :)

Jeah-Michel Duguay

Can we please go back to sort weapons and bodies separately. Sorting files by characters is such a pain for me to choose the weapons I want to put on the minis. Right now I need to go back and forth between folders to find the right body and the right weapon. Like if survivor A was so obvious which one it is among them.

Benjamin Engl

Just make a folder for the weapons after downloading and copy them all in from the different folders. I personally prefer that the models are complete in their folder with their standard weapons, as thats the main thing I print. It would be more work to find the standard intended combination from splitted folders than it is to collect the weapon models for a extra weapons folder.

Diego López Peña

I love the three freebies look so good. But I was left wanting some kind og arcane trickster with that style (mid spellcasting)

Brian Billo

There seem to be only 6 survivors and not 7. Minor quibble, but I sent a message. The bald, bare chested dude seems to be MIA.

Anonymous

Is anyone carving out hollows for magnets in the bases? I’m curious about the best way to do it. I’d also love to see be an option for this in the STL files.

Rupert Dunn

people realise that a head swap isn't a 7th model, right?

Lorne Bixby

i plain base everything and created some files on thingiverse to glue in/on washers. i use magnetic strip tape in all my storage. i think this method is way cheaper than using magnets on the models.

ArtisanGuild

it's an extra. We do 6 basic models normally, but this one was interesting with and without helmet. After few requests on the communities we decided to include him :)

ArtisanGuild

please try to extract those manually in a folder that is not too far from its location. Sadly SYNC make those zip even if we upload regular files and folders, and now it's the only premium platform working for us. Too much traffic for dropbox, box and other system we tried. Sync have no traffic limit :)

Anonymous

As of right now the link to the survivors set is not working to allow me to download.

Anonymous

I'm in the same boat. They look great and have dynamic poses cause of the extra angles provided with the rocks, but same token the contact point between actual model and "base" is now usually just a toe. I had huge issues with the "bug beast" repeatedly breaking away from the "rock bases" simply due to the fact that a model that uses an entire build plate's worth of area only attaches to its base via two of the four spindly leg areas, and that is at most a combined surface area of less than 1mm cubed. Awesome model, *incredibly* delicate. I'm sure this model is gonna require lots of super gluing later in its life.

Anonymous

First time printing one of Gregs pre-supported models, I have watched his videos and I use his settings for my own supports. Just wow, Bravo sir I printed the Battle Prawn and Hiro and they came out brilliantly. so much time saved. Thanks again for all your work.

James D Cheney

Just wondering if anyone else had trouble unzipping the files? The pre supported Lara says something about the path being too long.

Bradley Flores

The discount code ARTISANCOLLECTION is not working. What time zone do the codes work from? I am in Eastern Standard Time and it is 11:53 on the 10th. I am not able to use the code.

Ralf Stephan

Hi, love the new set! Anyone else having issues extracting some of the zip files? I got an error on 3 files saying the file path is too long.

Andrea Fait

Hello, just joined and still checking among all these sculpts :) I get an error when I try to get to the post where there are suggestions/hints about the presupported files (from the "My membership" => "A welcome from Artisan Guild" post, link in the text "Read this post to see his indications and download 2 samples :)"). Plainly I get a 404 error from the patreon portal, could you check it please? :)

Anonymous

The link for the scourgeland survivors is giving me an error "8026 This link has been deleted by the owner."

PhoenixForged

figures the day I wait til to do all my patreon DLs, lol

Adam Schaefer

I'm sure they'll get on it as soon as they're aware.

James Nelson

Scorgeland survivors link deleted?

Anonymous

The link is not working

Anonymous

Link does not work:(

Clinton

Link says " 8026 This link has been deleted by the owner"

Lord Chronos

Thanks for the changelog! It will help a lot to know if we have to re-download anything :)

Stephen Rider

It looks like the Tye of Tialevor refers back to pt 1, is that accurate?

Juan Carpintero

Link is broken again, "8026 This link has been deleted by the owner."

PWCSponson

The link is unfortunately broken again to download the set :(

Anonymous

Same - Link is deleted by owner.

Anonymous

Hate to bee a broken record, but Link still deleted

Henry Aberg

Yeah, link is deleted...

ArtisanGuild

We don't know what's happening with sync, but we updated the link, once again :) It's up now

Kady

Eye of Tialevor Bonus models? I have been pretty distracted with all the things going on lately, have I missed something? I hope I have not missed the any other "bonus links" the past couple months?

Anonymous

I am trying to use multiple discount codes in MyMiniFactory, but the ARTISANCOLLECTION one doesn't seem to work. Suggestions?

Anonymous

I am not having any luck with the "WHOISTHEBOSS" code on MyMiniFactory. Thought Id check to see if there was an issue with this! Thanks.

House Hendoe

I can't unzip Lara and several others because their File Path Name is too long ( Error 0x80010135) please fix before the end of the month.

Timek

That's not a problem for them to fix. That's an error on your side. Google the error number and fix it yourself.

Anonymous

Haga clic aquí para descargar los regalos de Eye of Tialevor 3 . Me da problemas con la contraseña

Anonymous

is it too late to download scourgeland survivors? =(

Cecil Solomon

I got it just fine. As of my message, I think that you have about four hours. After that point, you'll probably have to request a link.

Anonymous

I try to download it June 30th and the dl fails. It doesn't seems you can dl it after that date.

Anonymous

i cant find June packet link...didnt download it yet...help please

Gaming Pug

Can't wait for the July Set its gonna be awesome

Jack Diggler

when are the July files being released?

Fogo

ScorgeLand Survivor F (repaired) with supports keeps failing to print left arm. Will keep trying to slow lift speed and increase exposure time. What exposure times and lift speeds are you recommending for this particular print to work?