Kit Theory: Setting Up Your Plate Carrier (Patreon)
Content
The most crucial and important piece of load-bearing equipment is the plate carrier. From Afghanistan to the current battlefields of Ukraine, the plate carrier remains the favorite of most troopers for several reasons.
For me personally, the reasons are simplicity and comfort. A plate carrier carries everything you need, including ammo, water, admin, medical, signals, and, of course, ballistic protection. Usually, the addition of a simple pistol belt or a padded "war belt" is all you need to complete the kit. Modern plate carriers are highly scalable in terms of protection, allowing for the rapid addition of soft armor panels as well as hard side plates depending on the threat level.
There are countless ways to set up a plate carrier, but I will use the configuration I have been running for several years as an example. The carrier described here is a Qore Performance EXO Gen 3 Plate Carrier paired with an AXL Structural Cummerbund. Regardless of the specific brand you choose, there are a few core features you absolutely want on your rig.
The Core Features
The Plate Bag: Look for a minimalist, laser-cut construction. The addition of a negative-space MOLLE attachment system makes the plate carrier modular without the extra water-retaining weight of traditional nylon webbing. Additional cut-outs save even more weight. There is no need for your plate bag to be unnecessarily heavy—remember that it is essentially just a fabric sleeve for your armor.
Structural Cummerbund: Honestly, structural cummerbunds were not always my preferred option because I don't attach a lot of heavy gear to my sides anyway. However, the simple fact that a rigid cummerbund doesn't fold or twist adds massive comfort when donning and doffing the carrier. Furthermore, it easily supports the weight of soft armor or side plates without sagging.
Armor Selection & Ride Height
Let's start with the most important part of the carrier: the plates.
I opted for Level III+ plates for the sole reason of saving weight. While Level IV plates are a highly valid choice for armor-piercing threats, Level III+ plates stop the most statistically common rifle rounds at the NIJ testing distance of 15 meters (50 feet). Because I leave a lot of my cummerbund uncovered, I can easily Velcro in Level IIIA soft armor and Level III+ hard side plates whenever the mission dictates it.
Ride Height: The shoulder straps should be adjusted so that the front and rear plates ride as high as possible to protect your upper thoracic cavity. However, long-term comfort deserves a vote in this discussion. It is okay to lower your front or rear bag slightly if it provides severe relief or makes your setup more compatible with your rucksack or belt.
You should not feel suffocated when putting on your plate carrier. Some extra breathing room doesn't hurt, as long as the carrier remains stable and the cummerbund is tight enough to prevent sagging. This slight slack also enables me to layer a fleece jacket or soft armor underneath without having to constantly re-adjust my straps.
The Front Plate Bag
Let's break down the front plate bag from top to bottom:
Top (Strong Side): The strong-hand side is completely empty. There are no tubes, cables, or PTTs (Push-To-Talks). This is done deliberately so I can get my rifle's buttstock properly shouldered without interference. I also placed my Tubes Quick-Release Buckles on my strong side, as they sit low enough not to interfere with my cheek weld while remaining clear of cables.
Top (Center): Here I run a DEFTEX EUD (End User Device) pouch. This pouch not only accepts most EUDs/smartphones, but it also allows me to store some cheat sheets and a lensatic compass. My hydration hose—coming from my weak side—is tightened down using the pouch's bungee. This way, the bite valve is right at my chin, allowing me to drink hands-free.
Top (Weak Side): I have my INVISIO PTT mounted to a Flimuur Comms Sled. This gives the PTT some standoff, making it highly compatible with backpack straps. I have a Garmin GPS mounted to this same side. While this isn't the optimal spot for a GPS, it allows for a quick glimpse at MGRS coordinates—which, in the era of EUDs, is the only thing I use my Garmin for anymore. My CAATTail antenna and ICEPLATE hose are both routed through this weak-side shoulder sleeve.
Bottom: Center-mounted at the bottom, I run a Shaw Concepts ARC Placard. I highly value the adjustability and Tubes compatibility of this particular placard. I use their RAM inserts, as the internal retention is incredibly secure and, in my experience, eliminates the need for annoying over-the-top shock cord. Even when utilizing a bulky EUD above it, I can add a slight forward tilt to my placard to draw my three primary 5.56 magazines without any snagging.
Admin & Comms: Layered directly on top of my placard is an L4 XXS Wide GP (General Purpose) pouch. This stretchy pouch holds extra admin gear, face paint, or snacks without adding unnecessary bulk. On the strong-hand side, tucked under the cummerbund, I wear a radio wing to store my comms. Having the radio up front allows for quick battery changes or frequency adjustments.
The Rear Plate Bag
My rear plate bag is almost entirely slick. I do not want anything interfering with the fit of an assault pack or heavy ruck.
The only thing directly on my back is my CAATTail Antenna, which provides better comms range without dealing with a massive, rigid whip antenna. On the interior side (facing my back), I run a Qore Performance ICEPLATE inside a matching sleeve for thermoregulation. The 1.5 liters of water acts as an excellent counterbalance to the loaded magazines on the front.
The Cummerbund
As mentioned, I deliberately keep my cummerbund largely slick to retain the ability to easily attach armor and to maintain arm mobility.
Weak Side: I run an L4 Double M4 pouch. Obviously, this allows me to carry two additional magazines if needed, but it is more frequently used to carry smoke grenades, spare ear protection, or extra medical equipment. Note: Always double-check that your weak-side cummerbund pouches do not block your draw stroke for your belt-mounted "speed reload" magazine.
Strong Side: I carry two dedicated frag grenade pouches. These can also double as handy small utility pouches. Next to them, I carry a tourniquet (TQ) secured tightly with heavy rubber bands.
Before anyone asks: My IFAK (Individual First Aid Kit) is stored in my pants cargo pocket. I highly suggest storing your IFAK either in a uniform pocket or on the small of your back/belt. You want to avoid mounting boxy objects like IFAKs or massive GP pouches on the sides or front of your plate carrier, as they severely restrict your arm movement and ability to shoot from the prone position.
The Final Loadout
While this setup does not involve an abundance of heavy pouches, utilizing only this plate carrier allows me to carry:
3 to 5x 5.56 Magazines
2x Frag Grenades
2x Tourniquets (minimum)
1x Smoke Grenade
1x EUD & 1x Radio
2 Liters of Water (ICEPLATE + ICEFLASK)
Various Admin/Navigation Items
Keep in mind that this setup is always extended by a first-line gun belt, which I usually keep very minimalist.
You do not need an abundance of heavy pouches to have a highly lethal, versatile setup. Focus on accessibility, mobility, and keeping your workspace clean.
As always, thanks for your attention.