Apollo to Switchwire/Enderwire adapter (Patreon)

Untested prototype (but should work well) of the Apollo to Enderwire (here) and Switchwire, and possibly other voron like mount(works with Apollo mini as well)nozzle height is the same as stealthburner, so you can use a probe in the rear block, like an eddy duo/coil. and might still work on modded similar block like for beacon/cartographer.

use linear rail mgn12h version of the apollo backplate

use the extra lock mainbody (or the mini extra lock with universal mainbody)

On the Switchwire/Enderwire a bit of Y is lost, as I had to shift the apollo forward (shifted 11.4mm), relative to the original hotend position. No X lostSherpamini will fit with motor facing the back, some other extruder may need a riser for a rear facing motoradapter to the enderwire block

M3x8: top screws

M3x6: optional right below the top (button head preferably, but socket head might still fit, as long as they don't stick out)

M3x6: on the bottom, again button head (socket head might work)

apollo to adapter

M3x10~M3x12: four middle screws (mgn12h patten)

M3x6: lower right and lower left (you don't need all 4, 1 on each side is enough)

M3x4: extra lock, (underside in the rear after the main body is installed, again 2 is enough)