cinderwing3d

no [roblems on my u1. mostly wyvern

I am having a problem with the Mostera Dragon. The leaves keep failing. I printed 5 and only one made it. Do anyone have any tips. I am using the cryogrip plates.

Yes! Add a brim and paint supports on the wings. Works like a charm. I had trouble at first too

Hi everyone can someone help me. ive just brought a u1 and for some reason the baby cow file keeps losing half the spots and hooves when I slice it. ive tried a bambu converter for colour mapping. Detect thin walls and changing the wall generator. im at a loss

Hi guys, I just subscribed to CinderWing 3D. I was wondering how I download my first STL from the welcome pack in order to actually print it? Thanks!

I have the worst time printing these. Either they shift or come loose on the bed. I even use a glue stick for my bed.

Question for those who use glow filament, do you use it in the AMS or externally if its part of a multicolor print. I got a message stating its not recommended due to the filament being more coarse and causing more ware and tare then normal. I read that there are parts that can be replace when worn down. Does it damage something else that cant be replaced?

I hate glow I did one long glow print and sadly because of how bad it is on the nozzles and gears it messed up my H2D hate that.

Okay I’m pretty sure this is a issue with my printer start off my build plate is 100% clean Dawn dish liquid hot water I use soft green scrubby to keep it clean but I’m trying to print the New classic dragon model four attempts every time the head breaks loose and it’s spaghettis curious if anybody else has had this issue I’m also using the cryogrip plate any suggestions or thoughts I’ve increased the temperature I ran it at 55c I still just ahead nothing else breaks loose

hi - I cant get the heads to stick on the new crystal dragon - cleaned plate, used glue and hairspray and tey are still moving - anyone help please? they have failed 5 times now - at 100% and 110% size.

Second time printing ferret hatchlings & I lost the whole plate again. Using cryogrip plates & tab brim on the head section. As soon as it gets to the head I lose them. What do I do?

Hello all is there still a discount for mmf for past models I can’t seem to find it

Woke up to this😭

Does anyone have tips on the baby monstera dragon? I’ve re-download the file, tried brim, washed the plate with dawn and then alcohol wiped (and also just washed no wipe), still it fails around 20-45% of the way. I was able to print a mono color no brim and just a dawn wash of the plate no problem, so I’m at a bit of a loss with this one. I’m printing on a bambu A1 80% print size 15% infil gyroid.

Have you tried glue that is specifically designed for 3D printing?

When we printed the bee. It printed with no eyes, claws and a few other parts. What’s going on?

Wheres the base for the banana split?

Ok I have a simple question. What’s the best way to take the brim off the hatching? I normally don’t print the brim but I was in a hurry and set 6 machines up to print the new dog hatchling and didn’t notice the brim was on. Now I have 180 I need to take brim off and it is stuck on there.

I was considering printing some older files, the strawberry snail and turtle, and then the birthday turtle, but the time really shocked me, for 1 item over 14 hours? Is that right?

These dragons from the latest hatchlings set are exceptionally hard to print. The chest piece has a very small surface area supporting rather large wings. Even with a 10mm brim and 0.05mm gap, I’m still getting some pulled off of a freshly cleaned PEI plate. A super tack plate would probably help, but they’ve been out of stock for a while.

How do the clickers mount in the potion bottles? There is no space for the tabs at the bottoms, just a square. Are you supposed to cut the bottom, because that creates its own issues?

I’m having a hard time with the baby winged treasure dragon, the right wing of the dragon is just fused with the chest at the half-ball joint thing. Every time I think I’m making progress on dislodging the wing, it turns out to just be the PLA bend/breaking. Similar issues with getting the mimic mouth open. This is at 69% size, .2 layer height, on FlashForge Creator 5. Help?