Kitty Christmas Soap Holder β A Cute Little Christmas Touch for the Bathroom ππ±π§Ό (Patreon)
Downloads
Content
Bring a little extra Christmas cheer to the sink with the Kitty Christmas Soap Holder from Sandstorm 3D Designs.
This festive holder combines an adorable Christmas kitty, Santa hat, bows, Christmas tree, and classic red, green, white, and black holiday colours with a practical holder designed around the Bath & Body Works 259 mL foaming hand soap bottle.
Itβs a fun way to dress up an everyday soap bottle while adding a little seasonal personality to a bathroom, powder room, kitchen sink, guest room, or holiday display.
Features:
3D-printable Kitty Christmas Soap Holder
Designed around the Bath & Body Works 259 mL Foaming Hand Soap bottle
Festive Christmas kitty artwork
Santa hat, bow, and Christmas-tree details
Multicolour-ready design
Decorative bottle-hiding format
Great for bathrooms, powder rooms, kitchens, and guest spaces
Designed by Sandstorm 3D Designs in Canada
Commercial-use tiers available subject to the third-party intellectual-property limitations below
Now available on Patreon!
Important Printing Information
This is a digital 3D-printable soap-holder design.
Final print quality, dimensional accuracy, bottle fit, stability, surface finish, and artwork appearance may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, top and bottom layers, bed adhesion, colour-change setup, orientation, and slicer profile.
Always inspect the sliced preview carefully before printing.
Pay particular attention to:
Bottle cavity dimensions
Base flatness
Side-wall strength
Pump clearance
Front artwork
Small decorative details
Layer adhesion
Colour-change placement
Any areas that may trap water or soap residue
Normal FDM characteristics such as visible layer lines, seams, minor dimensional variation, and small surface or colour differences should be expected.
Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, adhesion failures, colour-change problems, incorrect slicer settings, printer malfunctions, dimensional variation, bottle-fit issues, instability, or other printing-related losses.
Files are supplied as-is, and the user is responsible for selecting suitable materials, printer settings, bottle compatibility, placement, and final use.
Soap Bottle Fit & Compatibility
This holder is designed around the 259 mL Bath & Body Works Foaming Hand Soap bottle format shown in the promotional material.
Bottle packaging can change over time, and dimensions may vary between product lines, regions, packaging revisions, and manufacturers.
Before printing multiples or selling finished holders:
Confirm the dimensions of the actual bottle being used.
Test-fit the bottle without forcing it.
Make sure the pump remains easy to operate.
Confirm that the bottle sits upright and securely.
Make sure the holder does not interfere with the pump mechanism.
Check that the bottle can be removed without excessive force.
Universal compatibility with every Bath & Body Works bottle, every 259 mL bottle, or future packaging revisions cannot be guaranteed.
Normal FDM tolerances, filament shrinkage, scaling, and printer calibration may also affect fit.
Commercial sellers should test the exact bottle style they intend to advertise as compatible before making specific compatibility claims.
Bathroom, Sink & Wet-Area Use
The Kitty Christmas Soap Holder is intended for normal indoor decorative use around sinks and hand-washing areas.
Because these areas are regularly exposed to water and soap:
Wipe standing water away when practical.
Clean soap residue periodically.
Do not allow spills to remain trapped around the bottle for extended periods.
Dry the holder thoroughly during cleaning.
Check underneath the holder periodically for trapped moisture.
Avoid placing it where it may be repeatedly soaked or submerged.
Soap, water, cleaning products, and prolonged moisture can affect the appearance of some filaments and may leave residue on both the holder and the surface beneath it.
Stability & Pump Use
Pressing down on a foaming-soap pump transfers force through the bottle and holder.
Before regular use:
Make sure the holder sits flat.
Place it on a stable, level counter.
Confirm the bottle is properly seated.
Make sure the holder does not slide excessively when the pump is pressed.
Do not use excessive force on the pump.
Keep the holder away from counter edges.
If the printed holder rocks, slides excessively, cracks, or becomes unstable, discontinue use until the issue is corrected.
The user may choose to add appropriate non-slip pads or another suitable surface treatment if needed, but any added material should be compatible with both the printed filament and the countertop.
Soap Spills & Surface Protection
Liquid or foaming hand soap may leak or drip from the pump during ordinary use.
Soap products can contain fragrances, dyes, oils, alcohols, surfactants, and other ingredients that may affect:
Printed plastic
Paint or surface finishing
Countertops
Wood
Natural stone
Sealants
Other surrounding materials
Clean spills promptly and follow the soap manufacturer's care and safety instructions.
If the holder will sit on a delicate or porous surface, consider using an appropriate protective barrier beneath it.
Sandstorm 3D Designs is not responsible for staining, discolouration, surface damage, soap leakage, or damage caused by cleaning products, spills, or prolonged moisture exposure.
Filament & Care
PLA may be suitable for normal indoor decorative bathroom use but can soften or deform under excessive heat.
PETG or another suitable filament may offer additional moisture and temperature resistance depending on your printer and intended environment.
For normal care:
Remove the soap bottle before cleaning when practical.
Wipe with a soft damp cloth.
Use mild soap if needed.
Avoid harsh solvents unless known to be compatible with the selected filament.
Rinse away soap residue carefully.
Dry thoroughly before replacing the bottle.
Do not place in a dishwasher.
Do not expose to boiling water or high-temperature cleaning.
Keep away from heaters, candles, and open flame.
Cleaning & Hygiene
Because the holder sits in a hand-washing area, clean it periodically.
FDM prints naturally contain layer lines and small surface irregularities that may collect soap residue, dust, or moisture.
This product is not a medical, sanitary, or sterilizable device.
Do not make claims that a printed holder is antibacterial, germ-resistant, sterile, or hygienically certified unless appropriate testing supports those claims.
Safety & Intended Use
The Kitty Christmas Soap Holder is intended as a decorative holder for a compatible hand-soap bottle.
It is not intended as:
A toy
A soap dispenser by itself
A food-contact product
A drinking container
A medical device
Safety equipment
A load-bearing product
Inspect the finished print before use.
Discontinue use if you notice:
Cracking
Sharp broken edges
Layer separation
Warping
Loose decorative pieces
Significant instability
Damage that interferes with bottle fit
Broken printed pieces may present a choking hazard.
Keep loose or damaged pieces away from young children and pets.
Soap & Child Safety
The printed holder does not change the safety requirements of the soap placed inside it.
Always follow the soap manufacturer's instructions and warnings, particularly regarding:
Eye contact
Accidental ingestion
Skin sensitivity
Child access
Proper use
Keep soap products out of reach of young children where required by the product manufacturer.
Sandstorm 3D Designs is not responsible for reactions, ingestion, spills, or other incidents involving the soap or bottle used with the holder.
Included / Not Included
The Patreon download includes the applicable digital Kitty Christmas Soap Holder file(s) described in the release.
Unless specifically stated otherwise:
Bath & Body Works soap, soap bottle, replacement pump, bathroom accessories, towels, Christmas decorations, and other promotional props are not included.
The soap bottle shown in promotional images is for display and fit demonstration only.
A finished physical soap holder is not included with the digital-file download.
File & Commercial-Use Terms
Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.
Where permitted under the applicable Sandstorm membership, authorised finished physical 3D-printed copies may be sold only to the extent Sandstorm 3D Designs owns or is authorised to license the applicable rights.
Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.
The underlying Sandstorm model remains the intellectual property of Sandstorm 3D Designs.
Anyone selling finished physical soap holders is responsible for:
Print quality
Material selection
Bottle compatibility
Stability
Final inspection
Accurate compatibility descriptions
Soap and moisture-care information
Appropriate customer warnings
Packaging and customer support
Compliance with applicable consumer-product requirements
Compliance with applicable intellectual-property requirements
Commercial sellers should avoid stating that the holder is official, licensed, universally compatible, waterproof, antibacterial, or sanitizable unless they have appropriate rights or testing to support those claims.
Fan-Inspired / Trademark Disclaimer
This design contains artwork strongly associated with Hello Kitty, a character and brand associated with Sanrio, as well as compatibility references to Bath & Body Works.
Sandstorm 3D Designs is not affiliated with, sponsored by, licensed by, authorised by, endorsed by, or officially connected with Sanrio, Hello Kitty, Bath & Body Works, or their respective affiliates or rights holders.
Any third-party characters, names, logos, trademarks, trade dress, bottle designs, artwork, or other protected elements remain the property of their respective owners.
The reference to Bath & Body Works 259 mL Foaming Hand Soap is used only to describe intended product compatibility.
No ownership, sponsorship, endorsement, licence, or official association is claimed.
A disclaimer does not create permission to reproduce or commercially sell protected third-party intellectual property.
A Sandstorm 3D Designs commercial membership can only grant rights to intellectual property that Sandstorm 3D Designs owns or is authorised to license.
It cannot grant commercial rights to Hello Kitty, Sanrio, Bath & Body Works, or other third-party intellectual property.
Members choosing to manufacture, advertise, or sell finished versions containing protected third-party artwork or branding are responsible for determining whether they have the legal rights required to do so.
Product Responsibility
By printing, selling, installing a soap bottle in, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, dimensional accuracy, bottle compatibility, pump operation, stability, placement, moisture management, cleaning, customer warnings, and intellectual-property compliance.
Sandstorm 3D Designs is not responsible for failed prints, bottle incompatibility, soap spills, leaking bottles, damaged countertops or furniture, staining, slipping or tipping holders, broken printed components, personal injury, third-party intellectual-property claims, or other losses arising from the manufacture, sale, handling, or use of the finished product.