Home Creators Posts Import Register Favorites Logout

Downloads

Content

Add some playful Christmas attitude to your bathroom or kitchen with the Angry Bear Christmas Soap Holder from Sandstorm 3D Designs.

This festive 3D-printable holder is designed around the Bath & Body Works 259 mL Foaming Hand Soap bottle and gives that everyday soap bottle a much more fun holiday presentation.

With its bright Christmas colours, mischievous green character, Santa hat, and wrapped present, it’s a bold seasonal piece for bathrooms, powder rooms, kitchens, guest spaces, or anywhere you want to add a little Christmas personality.

Features

  • 3D-printable Angry Bear Christmas Soap Holder

  • Designed around the Bath & Body Works 259 mL Foaming Hand Soap bottle

  • Festive Christmas-themed artwork

  • Multicolour-ready design

  • Functional soap-bottle holder

  • Great for bathrooms, kitchens, powder rooms, and guest spaces

  • Decorative holiday display piece

  • Designed by Sandstorm 3D Designs in Canada

  • Commercial-use tiers available subject to the third-party intellectual-property limitations below

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable soap-holder design.

Final print quality, dimensional accuracy, bottle fit, stability, colour appearance, and surface finish may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, top and bottom layers, bed adhesion, colour-change setup, orientation, and slicer profile.

Always inspect the sliced preview carefully before printing.

Pay particular attention to bottle cavity dimensions, pump clearance, base flatness, side-wall strength, decorative artwork, thin features, colour-change placement, and any areas that may collect moisture or soap residue.

Normal FDM characteristics such as visible layer lines, seams, slight dimensional variation, and minor colour or surface differences should be expected.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, adhesion failures, colour-change problems, incorrect slicer settings, printer malfunctions, dimensional variation, bottle-fit issues, instability, or other printing-related losses.

Files are provided as-is, and the user is responsible for selecting suitable materials, printer settings, bottle compatibility, placement, and final use.

Soap Bottle Fit & Compatibility

This holder is designed around the Bath & Body Works 259 mL Foaming Hand Soap bottle format shown in the promotional material.

Bottle packaging can change over time, and dimensions may vary between product lines, manufacturing runs, regions, and future packaging revisions.

Before printing multiples or selling finished holders:

  • Confirm the dimensions of the actual bottle.

  • Test-fit the bottle without forcing it.

  • Make sure the pump operates freely.

  • Confirm the bottle sits upright and securely.

  • Make sure the holder does not interfere with the pump mechanism.

  • Check that the bottle can be removed without excessive force.

Universal compatibility with every Bath & Body Works bottle or every 259 mL bottle cannot be guaranteed.

Commercial sellers should test the exact bottle style they intend to advertise as compatible before making specific compatibility claims.

Bathroom, Kitchen & Wet-Area Use

The Angry Bear Christmas Soap Holder is intended for normal indoor decorative use around sinks and hand-washing areas.

Because these locations are regularly exposed to water and soap:

  • Wipe away standing water when practical.

  • Clean soap residue periodically.

  • Avoid allowing spills to remain trapped around the bottle.

  • Dry the holder thoroughly during cleaning.

  • Check underneath periodically for trapped moisture.

  • Do not submerge the holder for extended periods.

Soap, water, cleaning products, and prolonged moisture may affect the appearance of some filaments or leave residue on the holder and surrounding surface.

Stability & Pump Use

Pressing a soap pump places downward force through the bottle and printed holder.

Before regular use:

  • Make sure the holder sits completely flat.

  • Use it on a stable, level countertop.

  • Confirm the bottle is properly seated.

  • Make sure the holder does not slide excessively when the pump is pressed.

  • Avoid excessive force.

  • Keep the holder away from counter edges.

If the holder rocks, slides excessively, cracks, or becomes unstable, discontinue use until the issue is corrected.

Appropriate non-slip pads may be added by the user if desired, provided they are compatible with both the filament and countertop surface.

Soap Spills & Surface Protection

Foaming hand soap may drip or leak during normal use.

Soap products may contain fragrances, dyes, oils, alcohols, surfactants, or other ingredients that could affect printed plastics or nearby surfaces.

Clean spills promptly and follow the soap manufacturer's care and safety instructions.

If the holder is placed on a delicate, porous, or easily stained surface, consider using a suitable protective barrier beneath it.

Sandstorm 3D Designs is not responsible for staining, discolouration, soap leakage, countertop damage, or other surface damage caused by spills, cleaning products, or prolonged moisture exposure.

Filament & Care

PLA may be suitable for normal indoor decorative bathroom use but can soften or deform under excessive heat.

PETG or another appropriate filament may offer additional toughness and moisture resistance depending on your printer and intended environment.

For normal care:

  • Remove the soap bottle before cleaning when practical.

  • Wipe gently with a soft damp cloth.

  • Use mild soap if required.

  • Avoid harsh solvents unless known to be compatible with the selected filament.

  • Dry thoroughly before replacing the bottle.

  • Do not place in a dishwasher.

  • Do not expose to boiling water or high-temperature cleaning.

  • Keep away from heaters, candles, and open flame.

Cleaning & Hygiene

Because this holder sits near a hand-washing area, periodic cleaning is recommended.

FDM prints naturally contain layer lines and small surface irregularities that may collect soap residue, dust, or moisture.

This product is not a medical, sterile, antibacterial, or sanitizable device.

Do not advertise the finished holder as antibacterial, germ-resistant, hygienically certified, or sterilizable unless appropriate testing supports those claims.

Safety & Intended Use

The Angry Bear Christmas Soap Holder is intended as a decorative holder for a compatible soap bottle.

It is not intended as:

  • A toy

  • A soap dispenser by itself

  • A food-contact product

  • A drinking container

  • A medical device

  • Safety equipment

  • A load-bearing product

Inspect the finished print before use and periodically afterwards.

Discontinue use if you notice cracking, sharp broken edges, warping, layer separation, loose decorative pieces, significant instability, or damage that affects bottle fit.

Broken printed pieces may present a choking hazard.

Keep loose or damaged parts away from young children and pets.

Soap & Child Safety

The printed holder does not change the safety requirements of the soap placed inside it.

Always follow the soap manufacturer's instructions and warnings regarding eye contact, ingestion, skin sensitivity, child access, and proper use.

Keep soap products out of reach of young children where required by the product manufacturer.

Sandstorm 3D Designs is not responsible for reactions, ingestion, spills, or other incidents involving the soap or bottle used with the holder.

Included / Not Included

The Patreon download includes the applicable digital Angry Bear Christmas Soap Holder file(s) described in the release.

Unless specifically stated otherwise:

Bath & Body Works soap, soap bottle, pump, bathroom accessories, Christmas decorations, towels, display props, and other promotional items are not included.

The soap bottle shown in the promotional images is for display and fit demonstration only.

A finished physical soap holder is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.

Where permitted under the applicable Sandstorm membership, authorised finished physical 3D-printed copies may be sold only to the extent Sandstorm 3D Designs owns or is authorised to license the applicable rights.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The underlying Sandstorm model remains the intellectual property of Sandstorm 3D Designs.

Anyone selling finished physical soap holders is responsible for print quality, material selection, bottle compatibility, stability, final inspection, accurate compatibility descriptions, soap and moisture-care information, appropriate customer warnings, packaging, customer support, and compliance with applicable consumer-product and intellectual-property requirements.

Commercial sellers should avoid describing the finished holder as official, licensed, universally compatible, waterproof, antibacterial, or sanitizable unless appropriate rights or testing support those claims.

Fan-Inspired / Trademark Disclaimer

The artwork shown on this design is strongly reminiscent of The Grinch, a character associated with Dr. Seuss Enterprises.

Because of that, this design should be treated as containing potentially protected third-party character artwork.

Sandstorm 3D Designs is not affiliated with, sponsored by, licensed by, authorised by, endorsed by, or officially connected with Dr. Seuss Enterprises, The Grinch, Universal, Illumination, Bath & Body Works, or their respective affiliates or rights holders.

Any third-party characters, names, logos, trademarks, trade dress, packaging, artwork, or other protected elements remain the property of their respective owners.

The reference to Bath & Body Works 259 mL Foaming Hand Soap is used only to describe intended product compatibility.

No ownership, sponsorship, endorsement, licence, or official association is claimed.

A disclaimer does not create permission to reproduce or commercially sell protected third-party intellectual property.

A Sandstorm 3D Designs commercial membership can only grant rights to intellectual property that Sandstorm 3D Designs owns or is authorised to license.

It cannot grant commercial rights to The Grinch, Dr. Seuss Enterprises, Bath & Body Works, or any other third-party intellectual property.

Members choosing to manufacture, advertise, or sell finished versions containing third-party protected material are responsible for determining whether they have the legal rights required to do so.

Product Responsibility

By printing, selling, installing a soap bottle in, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, dimensional accuracy, bottle compatibility, pump operation, stability, placement, moisture management, cleaning, customer warnings, and intellectual-property compliance.

Sandstorm 3D Designs is not responsible for failed prints, bottle incompatibility, soap spills, leaking bottles, damaged countertops or furniture, staining, slipping or tipping holders, broken printed components, personal injury, third-party intellectual-property claims, or other losses arising from the manufacture, sale, handling, or use of the finished product.

Files