Home Creators Posts Import Register Favorites Logout

Downloads

Content

Gift cards are always useful, but they donโ€™t have to be boring!

The Gamer Christmas Gift Card Holder from Sandstorm 3D Designs turns a simple gift card into a much more fun Christmas presentation for the gamer in your life.

Featuring bold red, green, black, and white holiday colours, game-controller-inspired artwork, festive Christmas details, and a built-in front pocket for the card, this design makes the holder part of the gift itself.

Perfect for Christmas morning, stocking stuffers, Secret Santa gifts, teacher gifts, office exchanges, or anyone who would rather be gaming. ๐ŸŽฎ

Features

  • 3D-printable Gamer Christmas Gift Card Holder

  • Built-in front gift-card pocket

  • Festive gamer-inspired Christmas artwork

  • Red, green, black, and white multicolour design

  • Integrated top opening for optional hanging or display

  • Great for Christmas gifts and stocking stuffers

  • Reusable decorative presentation piece

  • Suitable for standard-sized compatible gift cards

  • Designed by Sandstorm 3D Designs in Canada

  • Commercial-use tiers available subject to applicable membership terms

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable gift-card holder design.

Final print quality, dimensional accuracy, card fit, surface finish, artwork appearance, and structural strength may vary depending on printer, nozzle, filament, calibration, layer height, wall settings, infill, top and bottom layers, bed adhesion, orientation, colour-change setup, and slicer profile.

Always inspect the sliced preview carefully before printing.

Pay particular attention to:

  • Gift-card pocket dimensions

  • Pocket opening

  • Front retaining walls

  • Top hanging/display opening

  • Thin decorative details

  • Raised artwork

  • Colour-change placement

  • Layer adhesion

  • Base and outer-edge quality

Normal FDM characteristics such as visible layer lines, seams, minor dimensional variation, and slight colour or surface differences should be expected.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, bed-adhesion failures, colour-change problems, incorrect slicer settings, printer malfunctions, dimensional variation, poor gift-card fit, broken components, or other printing-related losses.

Files are supplied as-is, and the user is responsible for selecting suitable materials, printer settings, and final use.

Gift Card Fit & Compatibility

Gift cards can vary slightly in thickness, corner radius, coatings, packaging, and overall dimensions.

The holder is intended for a compatible standard-sized gift card, but universal compatibility with every gift card, prepaid card, membership card, or specialty card cannot be guaranteed.

Before using or selling the finished holder:

  • Test the actual card you intend to use.

  • Insert the card gently.

  • Do not force an oversized or unusually thick card into the pocket.

  • Check that the card can be removed without excessive bending.

  • Inspect the pocket for rough edges or excess material.

  • Confirm that the card remains reasonably secure during normal handling.

If the fit is too tight, forcing the card may damage either the printed holder or the card itself.

Printer calibration, filament shrinkage, scaling, elephant foot, and extrusion settings may all affect final fit.

Commercial sellers should test compatibility before advertising the holder for a specific card size or brand.

Gift Card Protection

Before inserting a valuable gift card, prepaid card, or other stored-value card, inspect the finished pocket carefully.

Make sure there are no:

  • Sharp edges

  • Rough seams

  • Printing blobs

  • Excess plastic

  • Warped surfaces

  • Tight areas that could scratch or bend the card

Sandstorm 3D Designs is not responsible for damaged, scratched, lost, misplaced, or unusable gift cards placed inside a finished print.

If giving the holder as a gift, confirm that the card is properly seated before wrapping, hanging, or transporting it.

Hanging & Display Opening

The integrated upper opening may be useful for light decorative hanging or display.

However, the finished print should not automatically be treated as a load-bearing ornament or structural hanger.

If hanging the holder:

  • Use a lightweight ribbon, cord, or suitable hook.

  • Inspect the opening for cracks before use.

  • Avoid aggressive pulling or twisting.

  • Do not hang heavy objects from the holder.

  • Do not hang it where falling could cause injury or property damage.

  • Avoid hanging it directly above valuables, children, or pets.

The safest use is as a lightweight gift-card presentation and decorative display piece.

Filament & Durability

PLA is generally suitable for normal indoor decorative use and holiday gift presentation.

However, PLA may soften or deform under excessive heat.

PETG or another suitable filament may provide additional toughness or temperature resistance depending on your printer and intended environment.

Whatever material is selected:

  • Ensure good layer adhesion.

  • Inspect the gift-card pocket and hanging area.

  • Avoid under-extrusion.

  • Do not use cracked or weakened prints.

  • Keep away from excessive heat.

  • Avoid heavy impact or bending.

No common 3D-printing filament should automatically be considered unbreakable or indestructible.

Heat & Holiday Display Safety

Keep the finished holder away from:

  • Candles

  • Fireplaces

  • Wood stoves

  • Heaters

  • Hot Christmas lights

  • Open flame

  • Hot appliances

  • Prolonged direct sunlight

  • Hot vehicle interiors

3D-printed plastics may soften, warp, melt, or become damaged when exposed to sufficient heat.

If displayed on or near a Christmas tree, keep it well away from any lighting or electrical component that becomes unusually hot.

Cleaning & Care

For normal care:

  • Remove the gift card before cleaning.

  • Wipe gently with a soft dry or slightly damp cloth.

  • Use mild soap only when necessary.

  • Avoid harsh solvents unless known to be compatible with the selected filament.

  • Dry thoroughly before reinserting the card.

  • Do not place in a dishwasher.

  • Do not expose to boiling water or high-temperature cleaning.

Store carefully between holiday seasons to help protect thin details and decorative edges.

Child & Small-Part Safety

The bright Christmas colours and gamer artwork may attract children, but the finished holder should not automatically be considered a children's toy.

Broken printed pieces, ribbons, hooks, or other added accessories may present choking or entanglement hazards.

Keep damaged components away from young children and pets.

Do not allow children to chew on the printed holder.

If used to present a gift card to a child, an adult should inspect the finished print and any attached ribbon, hook, or other accessory before use.

Safety & Intended Use

The Gamer Christmas Gift Card Holder is intended as a light-duty decorative gift-card presentation and display item.

It is not intended as:

  • A toy

  • Safety equipment

  • A structural hanging device

  • A load-bearing product

  • A food-contact product

  • A wallet or secure long-term storage device

Inspect the finished print before use.

Discontinue use if you notice:

  • Cracking

  • Sharp broken edges

  • Layer separation

  • Warping

  • Loose decorative sections

  • Damage around the gift-card pocket

  • Damage around the hanging opening

Included / Not Included

The Patreon download includes the applicable digital Gamer Christmas Gift Card Holder file(s) described in the release.

Unless specifically stated otherwise:

Gift cards, prepaid cards, money, ribbon, hooks, Christmas decorations, presents, and other promotional props are not included.

A finished physical holder is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.

Where permitted under the applicable membership, authorised finished physical 3D-printed copies may be sold.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The underlying model and original Sandstorm artwork remain the intellectual property of Sandstorm 3D Designs.

Anyone selling finished Gamer Christmas Gift Card Holders is responsible for:

  • Print quality

  • Material selection

  • Gift-card fit

  • Surface finish

  • Structural integrity

  • Final inspection

  • Accurate product descriptions

  • Heat and care information

  • Child-safety warnings where applicable

  • Packaging and customer support

  • Compliance with applicable consumer-product requirements

Commercial sellers should not advertise universal compatibility with every gift card unless they have tested the applicable cards.

Product Responsibility

By printing, selling, gifting, hanging, displaying, or using this design, the user or seller accepts responsibility for material selection, printer settings, print quality, dimensional accuracy, gift-card compatibility, hanging method, placement, final inspection, maintenance, and customer warnings.

Sandstorm 3D Designs is not responsible for failed prints, damaged or lost gift cards, broken components, falling displays, choking incidents, heat damage, damaged property, personal injury, or other losses arising from the manufacture, sale, handling, gifting, display, or use of the finished product.

Files

Comments

No comments found for this post.