Home Creators Posts Import Register Favorites Logout

Downloads

Content

Introducing another addition to the Sandstorm Sippers line — the No Handle 473 mL Can Cooler from Sandstorm 3D Designs!

This version keeps things simple with a clean, handle-free shape designed around 473 mL beverage cans. The layered construction gives the cooler a bold finished look while keeping the can easy to grab, set down, and enjoy.

Whether it’s sitting beside you in the workshop, game room, office, patio, or at home, this is a practical print with plenty of room for personality.

Features

  • 3D-printable Sandstorm Sippers No Handle Can Cooler

  • Designed for compatible 473 mL beverage cans

  • Clean handle-free design

  • Bold layered construction

  • Stable tabletop format

  • Great for soft drinks, energy drinks, sparkling beverages, and other compatible canned drinks

  • Part of the growing Sandstorm Sippers collection

  • Multicolour-ready design

  • Designed by Sandstorm 3D Designs in Canada

  • Commercial-use tiers available subject to the third-party intellectual-property limitations below

Now available on Patreon!

Important Printing Information

This is a digital 3D-printable can-cooler design.

Final print quality, dimensional accuracy, can fit, surface finish, strength, and appearance may vary depending on printer, nozzle, filament, calibration, layer height, wall count, infill, top and bottom layers, bed adhesion, colour-change setup, orientation, and slicer settings.

Always inspect the sliced preview before printing.

Pay particular attention to can cavity dimensions, upper retaining areas, base flatness, wall strength, layer adhesion, decorative artwork, and colour changes.

Normal FDM characteristics such as visible layer lines, seams, slight dimensional variation, and minor surface or colour differences should be expected.

Sandstorm 3D Designs is not responsible for failed prints, wasted filament, warping, poor bed adhesion, colour-change problems, incorrect slicer settings, printer malfunctions, dimensional variation, can-fit problems, broken components, or other printing-related losses.

Files are supplied as-is, and the user is responsible for selecting suitable materials, printer settings, and final use.

473 mL Can Fit & Compatibility

This version is designed specifically around compatible 473 mL beverage cans.

Can dimensions may still vary between manufacturers, beverage brands, regions, and packaging styles even when the stated volume is the same.

Before printing multiples or selling finished coolers:

  • Measure or test the actual 473 mL can you intend to use.

  • Insert the can gently.

  • Do not force an oversized can into the cooler.

  • Confirm the can sits securely and can still be removed comfortably.

  • Check that the cooler remains stable when loaded.

  • Verify fit before advertising compatibility with a specific beverage brand.

Compatibility with every 473 mL can cannot be guaranteed.

Printer calibration, extrusion width, filament shrinkage, scaling, and other tolerances may also affect final fit.

Can Cooler Use

The Sandstorm Sippers No Handle Can Cooler is intended to hold a compatible pre-packaged 473 mL beverage can.

It is not intended to replace the beverage can itself.

The drink should remain inside its original can while using the cooler.

This product should not be used as a drinking vessel or filled directly with beverages.

Condensation & Surface Protection

Cold beverage cans naturally produce condensation.

Moisture may collect inside or underneath the cooler during use.

To help protect both the print and surrounding surfaces:

  • Wipe away excess moisture periodically.

  • Do not allow standing water to remain trapped for extended periods.

  • Dry the cooler after use.

  • Check underneath before leaving it on wood or other moisture-sensitive surfaces.

  • Use an appropriate coaster or protective barrier where necessary.

Sandstorm 3D Designs is not responsible for water rings, staining, moisture damage, or other damage to furniture or surrounding surfaces.

Filament & Temperature Considerations

PLA is generally suitable for normal indoor can-cooler use but may soften or deform when exposed to excessive heat.

PETG or another suitable filament may provide additional toughness or temperature resistance depending on your printer and intended environment.

Avoid leaving the finished cooler:

  • In a hot vehicle

  • In prolonged direct sunlight

  • Beside heaters

  • Near fireplaces

  • Near open flame

  • Against hot appliances

The cooler is intended for cold or room-temperature canned beverages, not hot beverage containers.

Cleaning & Care

For normal care:

  • Remove the beverage can before cleaning.

  • Wipe with a soft damp cloth.

  • Use mild soap when necessary.

  • Dry thoroughly after cleaning.

  • Avoid harsh solvents unless known to be compatible with the selected filament.

  • Do not place in a dishwasher.

  • Do not expose to boiling water or high-temperature cleaning.

FDM prints contain natural layer lines and small surface irregularities, so periodic cleaning is recommended if condensation or spills collect on the print.

Food & Beverage Contact Note

The finished can cooler is intended to contact the outside of a sealed beverage can, not the beverage itself.

It is not certified for direct food or beverage contact.

Do not:

  • Pour beverages directly into the cooler.

  • Use it as a cup.

  • Store loose food inside it.

  • Assume the finished FDM print is food safe.

The original beverage can should remain the primary food-contact container.

Safety & Intended Use

The Sandstorm Sippers No Handle 473 mL Can Cooler is intended as a light-duty beverage-can accessory.

It is not intended as:

  • A children's toy

  • A drinking vessel

  • A hot-beverage holder

  • Safety equipment

  • A structural product

  • A sealed insulated container

Inspect the finished print before use.

Discontinue use if you notice cracking, sharp broken edges, layer separation, significant warping, loose decorative sections, or damage that prevents the can from fitting securely.

Broken printed pieces may present a choking hazard.

Keep damaged pieces away from young children and pets.

Included / Not Included

The Patreon download includes the applicable digital Sandstorm Sippers No Handle 473 mL Can Cooler file(s) described in the release.

Unless specifically stated otherwise:

Beverage cans, drinks, ice, straws, display accessories, and other promotional props are not included.

A finished physical can cooler is not included with the digital-file download.

File & Commercial-Use Terms

Files are for personal use only unless you have an active qualifying Sandstorm 3D Designs commercial membership or separate commercial licence.

Where permitted under the applicable Sandstorm membership, authorised finished physical 3D-printed copies may be sold only to the extent Sandstorm 3D Designs owns or is authorised to license the applicable rights.

Digital files may not be resold, shared, redistributed, transferred, uploaded, supplied to another person, or given away, whether modified or unmodified.

The underlying Sandstorm can-cooler model remains the intellectual property of Sandstorm 3D Designs.

Anyone selling finished physical can coolers is responsible for print quality, material selection, can compatibility, dimensional accuracy, final inspection, condensation warnings, heat-care information, accurate product descriptions, customer support, and compliance with applicable consumer-product and intellectual-property requirements.

Commercial sellers should not claim that a finished cooler is universally compatible, dishwasher safe, food safe, heatproof, or guaranteed to insulate for a particular length of time unless appropriate testing supports those claims.

Fan-Inspired / Trademark Disclaimer

The version shown in the promotional artwork contains a claw-style graphic and branding strongly associated with Monster Energy.

Because of this, that artwork should be treated as third-party intellectual property.

Sandstorm 3D Designs is not affiliated with, sponsored by, licensed by, authorised by, endorsed by, or officially connected with Monster Energy Company, Monster Beverage Corporation, or their respective affiliates or rights holders.

Any third-party names, logos, trademarks, artwork, slogans, trade dress, beverage packaging, or other protected material remain the property of their respective owners.

No ownership, sponsorship, endorsement, licence, or official association is claimed.

A disclaimer does not create permission to reproduce or commercially sell protected third-party intellectual property.

A Sandstorm 3D Designs commercial membership can only grant rights to intellectual property Sandstorm 3D Designs owns or is authorised to license.

It cannot grant commercial rights to Monster Energy branding, logos, packaging, or other third-party intellectual property.

Members choosing to manufacture, advertise, or sell versions containing third-party protected branding are responsible for determining whether they have the legal rights required to do so.

Product Responsibility

By printing, selling, loading, or using this design, the user or seller accepts responsibility for material selection, printer settings, dimensional accuracy, can compatibility, print quality, structural integrity, final inspection, placement, moisture management, customer warnings, and intellectual-property compliance.

Sandstorm 3D Designs is not responsible for failed prints, damaged beverage cans, spills, condensation damage, heat deformation, broken printed parts, personal injury, property damage, third-party intellectual-property claims, or other losses arising from the manufacture, sale, handling, or use of the finished product.

Files

Comments

LisaAnn

Can we get a handle version for like Dunkin Donuts, Starbucks. McDonald's large cups? Please & TYVM