【Live2D explanation】How to create realistic luster, thickness and reflection of glasses. (Patreon)
Content
*This article is a translation of an article I published on Pixiv Fanbox on June 23, 2022.
June.
This month, I had several parallel jobs & my birthday.
It was a very busy month for both my work and personal life...(not quite finished yet)...
Sorry for the delay, but I would like to continue with my previous explanation of modeling glasses.
If you haven't read it yet, please click here first 👇.
https://www.patreon.com/posts/67368566
Last time I explained how to make lens refraction.
This time, as the title suggests, we will explain how to make "luster," "thickness," and "reflection" of glasses.
【How to make glasses glossy】
I think there are many ways to make it, but I'll start with the following
◆Solid color art mesh as a foundation
◆”Highlight art mesh” with a smaller area than the “solid color layer”
◆Art mesh for masks (this time, make it in the shape of a stick)
and create a
clipping the highlight art mesh with the mask art mesh, and
sliding the mask art mesh.
By doing this, the glowing area looks as if it is moving by changing the angle of the face.
Do this for each part.
The rim part of the glasses looks as if it is actually reflecting light because the diagonal highlights appear to slide by rotating the bar in this way.
If I clipped all the pieces separately, I would have overcrowded the clipping frame.
I have clipped the left and right rims, the bridge and end piece, and other parts that can be clipped together.
↑All of these up are put together in one clipping frame
【How to make a representation of the thickness of a pair of glasses.】
Actually, I think this process contributes the most to the realism of the glasses.haha
This area is especially easy to see when my face is turned sideways. You can see the "side" of the rim of the glasses.
Without it, the glasses would look instantly flimsy (although there are thin frames like this, too...!)
Let's go to the instructions on how to make it.
Copy all the Warp deformer rim solid art mesh, highlight art mesh, and art mesh for masks that contain the glasses. You may want to add (side) to the end of the name for clarity.
The point is always to copy the entire deformer. The reason is described below.
Once copied, place all of the copied art mesh below the art mesh before copying.
Then, the copied warp deformer is shifted slightly toward the front in both the X and Y axes. (So far, this is a common technique to express thickness by shifting the art mesh of the same shape slightly.
In addition, we will add a twist here.
When I explained gloss earlier, I said, "The rim part of the glasses looks as if it is actually reflecting light because the diagonal highlights appear to slide by rotating the bar in this way."
The art mesh for the sides should be the opposite of this location
The blue line is the location of the mask for the normal rim art mesh and the red line is the location of the mask for the side rim art mesh. Let's move these in the same direction
By doing this, the gloss appears on the sides at a different location from the front part. The position of the luster changes as the surface changes, and this gives the image a more three-dimensional appearance. This technique is often used in illustrations.
As you can see, the light and dark areas are clearly defined, so it is very easy to see the "change of plane".
I said earlier "always copy the entire deformer," but if the range of motion is about the same as it is now, I don't think there is that big a disadvantage in shifting the art mesh directly with the deformer the same.
This time, however, we plan to make the range of motion 90° or more horizontally, so the glasses will turn completely sideways like this. (I transformed it just as an example)
To make the sides of the glasses commensurate with this condition, they would have to be shifted considerably. Shifting inside the deformer is likely to cause overhang and unexpected distortion at the midpoint, so in this case, the deformer was also made separately.
【How to make a reflection of glasses.】
Reflected light looks great when it is present, but it is the least difficult to create.
First of all, the mask is made from "Art Mesh for Mask Inversion" as explained in the previous article on the refraction of eyeglass lenses.
(If you make one such art mesh for mask inversion, it is very easy to reuse it.)
All that remains is to create an art mesh for reflection like this, invert the mask with the art mesh shown at the top, and slide it.
This in itself is a common technique.
However, this time, I was very particular about the "type of reflected light. I actually took a self portrait of the glasses and thoroughly observed how the light was reflected.
In my environment, there are four reflected lights
① Reflection of the monitor
This is the reflection of light from the monitor in front of the screen. The blue light-cut lenses are used, so the reflection is blue. An easy way to do this is to create a solid layer of blue rectangles with the Shape tool and then line up several of them.
(In this case, I used a different material to make it more realistic.
Prepare a commercially available drawing or photo, and use PhotoShop's "gamut specification" to select the brightest areas (play around with the amount of tolerance to your liking. The larger the tolerance, the wider the selection.)
Press OK to create a selection of bright areas, create a new layer, and fill it with blue.
By deleting the original layer, an art mesh for the reflected light of the monitor was created in no time. The key point is that bright areas such as desks are also slightly reflective!
Since the border of the monitor is too clear by itself, blur the border a little by using "Blur (Move)".
This "Blur (Move)" is recommended because it softens the impression of the border while maintaining the sharpness of the image, since there is a difference in the width of the vertical and horizontal blurring.
Now all that is left is to slide it to 20% opacity and the monitor's reflection is complete!
I can slide it as it is, but to emphasize the "reflection on the concave lens," I have deformed it by applying a slight deformer perspective on the left and right sides.
(I could have moved it to follow the vertical movement, but I did not do so this time in order to emphasize the reflection of the light in the room and the "reflection of the monitor in front of it," which will be discussed later.)
② Reflected light from room light
It is the reflected light that appears when the face looks up. It is a reflection of the light in the room (outside, would it be a reflection of the sun?) So this is the strongest reflection of all.
I created this one by tapping the round blur brush several times in Crysta to create a shape that looks like that.
One notable feature is the use of "two art meshes.
In Live2D, there are only three blend modes: normal, additive, and multiplicative, so if you try to create strong light with additive blending, the colors will inevitably become whitish.
First, a light blue color is applied in a normal layer…
By adding an additional layer of strong light on top of it, a gradation of blue to white is created, resulting in reflected light with more information.
(This light appears only when the viewer looks upward.
③Reflection on the side of the rim when the face is turned wide to the side
Here it is. If you have glasses, try it out and take a selfie with a large sideways view. You will probably get the same reflected light.
Perhaps it's the reflected light from the sides of the rim reflecting off the lens.
I just draw three lines as you see them, but to emphasize the "rim reflection," I make the line drawing with a border in a slightly darker color.
It's as if it appears when the face turns broadly to the side. This one follows up and down.
④??? (Reflection of door?)
It is actually a reflected light that was not there at the time of the progress I gave to YouTube and Fanbox. Since the reflection of the monitor is toward the → side, there was a lack of information about the reflected light when facing the front ← direction.
However, copying and pasting the monitor reflections would not be convincing enough (Are there 6 monitors?!?).I was staring at my selfie to see if I could find any good reflections, and I found a faint whitish reflection when I was facing ←.
There is a door on the far side of the soundproof room where I usually work, and light from outside is coming in through the glass of the door. I am not sure why it is not blue, but I implemented it as I saw it for the time being.
The above is a breakdown of the reflected light! I didn't think it was that difficult, but when I drew it out like this, it really brings out how particular I am about it.lol
And then. Perhaps some of you may have noticed in the explanatory video/picture at the top…
https://youtube.com/shorts/2MjXvon9Kqw?feature=share
I made the vines for the glasses.
Although the results are modest for the hard work involved, I think that the glasses have become more convincing.
I would like to explain how to make this vine and how to make the XY diagonal of the face, but sorry. This is the limit for this month's update... ;-)
I'm currently working on two Live2D jobs (one is a real-time production for distribution) and also working on a huge project behind the scenes.
I'm also very busy with my personal life, so I have my hands full trying to accomplish all of these things! (I'm also thinking about my birthday trip, and even if I can't go to the ...... wedding, I'd like to wear a dress and take some pictures).
I actually had a meeting today to discuss this huge project, and while I'm happy that we're coming to a good conclusion because it's something worthwhile and fun and I wanted to do, I also feel a sense of crisis that I have even less time to devote to updating my models... sweat.
Frankly, at the current pace, it is hopeless to make it in time for the Live2D contest.
I am already feeling sad that I will not be able to make it this time again, but even so, the fact that I was able to take a step forward in this way, that the work is progressing steadily and well, and that my progress is already being evaluated (that I have acquired the skills to be evaluated) is a great progress that I have never made before.
While accepting this as positive, I would like to make as much as I can until the deadline of the contest.
See you next time in July!