Home Creators Posts Import Register Favorites Logout

Content

*This article is a translation of an article I published on Pixiv Fanbox on July 20, 2022.

It's July. Japan is in the middle of summer and it is hot and dangerous every day, but how is everyone in the world doing?

In this issue, I would like to explain the "slanted face" deformation, which has been on the back burner for a long time.

The slanted face is the most difficult of all facial deformations.

If the face is deformed even a little, it will look strange all at once.

It may be no exaggeration to say that how beautifully a slanted face can be expressed is where a modeler's skill really shines.

In this issue, I will continue the explanation, comparing it with the description in my note of two years ago.

https://note.com/himono_vtuber/n/na1eb00fbc3b4

I quote the description in the note. (Forgive me if the text is a bit long)

ーーーーーーーーーーーーー

Live2D has a very useful tool called "Automatic Generation of 4 Corner Shapes".

(Reference: Live2D official tutorial "Automatic generation of 4 corner shapes")

The tool automatically creates oblique facial movements by multiplying the shapes of two parameters, and what happens when this is reflected in the angle XY of the high-mobility model…

It goes like this. (Geez!)

At first glance, it looks outrageous, but the blending of the XY motion itself is very nicely done, so the rest can be fine-tuned manually.

To begin with, the reason why such distortion occurs is because the movement of the human body is subject to "perspective.

When the human head is simplified and considered as a cube, perspective is applied when the face faces diagonally up or down as shown here.

However, the "Automatic Generation of 4 Corner Shapes" function does not take perspective into account, resulting in this kind of movement, and the shape appears distorted.

In other words, the distortion can be solved by shifting the part of the image where the perspective is not applied diagonally

ーーーーーーーーーーーーーーーーー

More than a citation.

Even now, the basic principle is still deformed according to this principle.

However, "Shifting the face at an angle solves the problem!" How easy it is to say, but the contour structure is not so simple.

https://youtu.be/1v1rf0_PSGI

After performing the "Automatic Generation of Four Corner Shapes," I used the temporary deformation tool "Perspective" to actually shift the contour diagonally, as per this rule. The movement is smooth, but don't the cheeks look kind of squashed and flat? It looks like a mask.

This is especially noticeable when viewed in a still image.

This is what happens with the latest methods

https://youtu.be/36_pSSOVQWg

Although the movement of the deformer is a mess, you can see that the actual contours are moving nicely while maintaining a three-dimensional effect.

If the forehead and cheeks are simply slid diagonally as in the former video, the forehead and cheeks will fall down and collapse as shown here, so it is important to manually maintain the height and roundness after sliding. The latter video shows such fine adjustment.

The downward direction, on the other hand, is too high on the cheeks and forehead, so the height of the cheeks and forehead should be reduced.

Why is the cheek/forehead crushed when sliding diagonally as it is?

Why such manual adjustment is necessary

I made a diagram.

This figure adds horizontal and diagonal orientations to the contour guides created in the previous explanation of the Y axis.

Let's draw the guide lines for the horizontal axis on this figure.

It looks a little grotesque.lol

What I want you to notice in this figure is that if you focus only on the red line, the perspective does not seem to be that large.

It may be even clearer if only the red line is shown.

It doesn't look like each part is extremely skewed as shown in this figure, does it?

Additionally, add a guide for the sides of the face here.

Do you see what I mean? The side of the face that was visible when facing the front is completely obscured when the face is turned sideways.

This means that the red line that overlaps the side of the face is also hidden (green line below).

Conversely, the front side is greatly stretched and occupies the main part of the face, right?

The earlier statement, "Shifting it diagonally will solve the problem!" does not consider this "side of the face, which has a large fluctuation in the area that can be seen or not seen" at all.

So, it is true that on the far side of the obliquely oriented face, perspective is applied and each facial part is placed at an angle down, however, the part of the face where perspective is most strongly applied and down is not visible because it is angled and goes around to the far side of the face. Therefore, the actual visible contour boundaries such as cheeks and forehead do not go down as much as you think.

I have explained this at length, but if you understand this logic, I think you will understand the meaning of the contour adjustment mentioned earlier.

If you simply deform the face by shifting the facial parts at an angle without considering the part that goes around to the back of the face, the contours at the back of the face will be crushed, so it is necessary to adjust for this.

Of course it is important to "try it just by imitation," but if you "try it with an understanding of the logic," you will have a much greater ability to apply it and a much higher quality of work. Please forgive me...!

When performing a diagonal deformation, we recommend the "Perspective" temporary deformation tool that we used earlier.

After shifting it diagonally for now with this, use the Transform Brush to shape it.

https://youtu.be/QOK7V4cS6Ro

Do the same for the bottom.

https://youtu.be/6qPHh_axdBg

That's all I have to say about how to do diagonal transformations, but I will tell you one last insanely important thing.

Don't just focus on the "left-right connection," but also on the "up-down connection."

What I mean by that is

https://youtu.be/5SqeuBcrnaQ

Everyone values the connection between left and right movements while looking up or down very much,

https://youtu.be/qJo-zpHIIVA

However, I have the impression that people don't pay much attention to the vertical movement of the left or right side of the face.

It is very important to check the left and right movements as appropriate, because there are quite a few cases where the left and right movements are beautiful but the up and down movements are distorted.

Turn on the onion skin and you can see the flow of the movement.

Basically, the trajectory of the upper, middle, and lower transformations should be "straight line (or >shape type)".

I drew a line connecting the positions of the chin, frown, cheeks, and other easily recognizable areas.

I think they are neatly aligned in a straight line.

In this case, the movement looks smooth.

https://youtu.be/R0STEd7X-Rk

Another natural looking case is when the trajectory is arced in a ">" shape.

It is like ↖ to the side when looking up and slightly ↙ to the side when looking down.

The actual human movement is actually closer to this.

https://youtu.be/Ao2YgQwI8HA

I have not adopted the above method because the physics compensates for this "tilting the face slightly only when facing diagonally up and down" movement, but you may use it if you do not want to use physics correction.

However, it is more difficult than a straight line trajectory. (Each part must be placed in a > shaped orbit without any sense of discomfort.)

So far this is a correct example. The next is a not-so-good example.

As a very very  common example, the upper and lower oblique faces become more and more bloated as they are created through trial and error, often resulting in a "<-type" trajectory on the opposite side of the face, as shown in this example…^^;

https://youtu.be/6F0ZX-K5lhk

If all the parts are moving in a nice "<" shape, the movement will not be that strange. However, it may not feel right when moved by tracking because it is different from the actual movement of the human body.

The most troublesome case is when the orbits of each site are disjointed.

While making various fine adjustments, it often happens that the balance of each is lost, resulting in the above situation.

https://youtu.be/Jb7gVCHHwQ4

When I move it around, the tininess is noticeable. This is clearly a distortion. If it is just the outline, it is still fine, but if parts such as eyes, nose, and hair are added, the discomfort will become greater and greater.

If this is the case, try adjusting the trajectory so that it is "straight" or ">" shaped. The vertical movement of the model will be smoother.

Of course, if you are too preoccupied with the up-and-down movement and the left-right movement goes wrong, it will be a complete disaster, so please check the left-right movement as necessary.

(The reason why oblique movements are difficult is that it is necessary to eliminate the sense of discomfort in both the left-right and right-right movements and the up-down movements...!)

The ability to understand, recognize, and correct distortions like this is really important.

And in order to recognize distortions, you have to train your "eye.

I think the only way to do this is to get used to it.

In drawing, Live2D, or anything else, it often happens that "I used to think I was good at it, but when I look back at my work, I see that it's really distorted. That's just proof that your eyes have become accustomed to it.

Of course, there is an efficient way to train your eyes, and that is to know how to check for distortions, as I mentioned earlier. Fortunately, Live2D has a much clearer guide called "original drawing," so it is easier than illustration to follow it and find distortions.

In future lectures, I would like to teach this kind of "bankruptcy check" and "distortion check" method as well, so please continue to support us.

ーーーーーーーーーーーーーーーーー

This completes my explanation of the contours, but I'm not sure what to explain next, so please let me know in the comments if there is anything you would like to know or would like to see in the article. (Comments can be in languages other than Japanese!)

For the time being, I would like to distribute the cmo3 file of the pupil as a plan during July.

Here it is.↓

https://www.patreon.com/posts/65791221

I have received several requests to distribute the cmo3 files, but first let me tell you that we do not intend to distribute them "in their complete state" (so-called "as-is" standing pictures). The reason is that I am too afraid of misuse and cannot take responsibility for it.

Therefore, if I were to distribute the files, I would distribute them in pieces, parts by parts.

This way, even if the deformer were to be used in its entirety, it would not be possible to imitate the severe placement of the parts, and the effect on me would be minimal.

The physics settings can be used in its entirety, but since it is just a list of numbers, I don't think this will have a major impact on me.

I apologize for any inconvenience this may cause and hope you will understand.

Then, this figure I made this time ↓.

I was able to do it quite well, so if you need it, please use it as a guide for angular deformation.haha

That's all! See you soon!

Comments

No comments found for this post.