Home Creators Posts Import Register Favorites Logout

Content

Hello Patreons,

The most requested feature of the printer is the $500 BOM. Over 1000 people on Youtube, Tik Tok, Instagram and Discord want this BOM and today I want to share it with you!

Here is a brief overview of the changes and enhancements:

1. THE 100 Linear Motion Kit

- The bearings allow a 40% higher maximum speed and a 60% higher acceleration, compared to the drylin / optical axis combination of the standard BOM

- The rods are straight by design. We cut the rods as the first step in production. When you cut a rod, it is always bent a tiny amount. As we smooth and polish our rods after cutting, we are able to repair these tiny bends. This results in perfectly straight rods.

- The rod/bearing combinations are hand selected. We have designed a quality control process where the rods are paired with their linear bearing counterparts. This is something we have implemented to reduce waste and therefore reduce the price. It also ensures that you get the quality you expect from such a product and nothing less.

2. High Speed Motors

Most of you who regularly consume my content know that I am a fan of Wantai and especially their 48mm stepper motors. I paired the high speed edition with one of these. Compared to the Usongshine motors they can handle 80% more power.  They also have an average of 25-30% more torque at the same voltage and more than twice the torque at maximum voltage.

3. Capricorn PTFE Tube

For a long time I thought that 1.9mm thick PTFE tubing was just another snake oil created by suppliers to steal your money, but I have had to learn that I was wrong. With 1.9mm wide PTFE tubing I have been able to reduce my pressure advance from 0.52 to 0.38, resulting in 25-30% more flow for quality prints before the Bowden extruder becomes the bottleneck!

4. Phaetus Rapido

Well, I talked a lot about this in the 1.1 release video. Much more flow for even more money. For the next version of the printer, the Rapido will only be part of the high speed edition and the chc pro will be the main hotend for the standard edition.

5.  Triangle Lab 5015 blowers

Similar to the Rapido, these blowers provide about 30-40% more airflow than a GDSTime, but also cost 3x more. I will downgrade them with the next version of the Standard Printer. The current 5015 blowers will be the go to part cooling for the High Speed Edition.

6. Light Weight Gantry

As you already know, I have created a lightweight gantry for my patreons. This will remain a Patreon exclusive. It is also the recommended gantry setup for the High Speed Edition.

7. ADXL345 Sensor

Going fast means you have to do proper input shaping, so I have included a sensor to measure the resonance of the frame and toolhead.

In total we are at a price of $470 (when shipping to Germany). This may vary depending on where you live. I also made sure that at least for Germany there were no shipping costs.

With this BOM I was able to print my 3:03 Benchy.

There are also a few options you can use if you want to spend more money:

A. LDO Speedys

These are about 5% faster than the Wantai's for about 60% more money. Not the best deal, but the Wantai's are pretty hard to come by. Currently no one is selling them on AliExpress, so I wanted to provide an alternative, even if it is way overpriced.

B. Bondtech CHT nozzle

The original Bondtech CHT has about 3-5% higher maximum flow rates and in my opinion the print quality is a bit better because of the coating (the filament does not stick to the nozzle). It also gives you the warm feeling of supporting people who are driving innovation in the 3D printing market for years now.

C. Titanium screws for the gantry

For the WR speedboat, I am reducing every bit of weight possible. So I will use titanium screws for the gantry of my next printer build. There is no rationale when it comes to price/performance, it's just stupid in so many ways... but it saves 17g in total... yeah...

D. Pre-foamed PLA

I plan to experiment a bit with foaming and pre-foamed PLA. I want to know if it's possible to print the gantry out of foamed PLA. This could save another 70-90g depending on how many parts can be replaced and which lightweight PLA is used. Even if it's not an option for the gantry or the rod carriage, at least the toolhead could be printed out of foamed PLA, which would save about 20-30g. But since this is pretty experimental, it's optional.

E. Steel PEI sheet

I would really like to promote my own flexplate here, but we had quality issues that needed to be resolved before we could go into mass production. However, as the soft plates tend to warp, making it difficult to get a good first layer, I have added the current steel plate that I use.

F. Power supply

If you read several sources about 3D printers there are many people who replace the power supply because they think that the quality of most china power supplies is so bad that they are a security risk. I'm not one of them, but to be honest I've changed the fan on all 4 of the 100 I've built since it was really annoying. In total, I spent more money upgrading the bad PSU than buying a proper one. So I've added a MeanWell one as it has a good reputation in the community.

I will announce the BOM to the public on Black Friday. As you all know from the last releases, the prices will increase due to the high demand that the printer creates. I want my supporters to get the best prices, so you will get access to the BOM 3 days before anyone else. Happy shopping!

https://docs.google.com/spreadsheets/d/1Ovg8QiOSGrwsRhgJh9qBnBvMFrqih7WvHAgKOiHKDN8/edit?usp=sharing

Comments

Chris Peach

should be the same as for raspberry pi from the official klipper docs

See

For some reason I get Cura crashes when trying to import a profile while running in a Chromebook Linux container, so it would be useful to have a set of photos or a list of settings so they can be re-entered manually.