Home Creators Posts Import Register Favorites Logout

Content

This video isn't of the spooky variety, but it is of the rambly variety! Isn't Halloween all about rambleys? Right? That's it?

Uh, anyway, link:

https://youtu.be/3iNOJ12nHXM

So yeah, October didn't end like I wanted it to and it's been a fairly frustrating week. But stuff like that happens! For now, I hope you enjoy this update and the special thing in it

Files

sddefault.jpg

Hi.

Comments

David Weintraub

On Internet Connectivity: We had a monopoly with Optimum in our town. However, both T-Mobile and Verizon are offering 5G Home Internet. I don’t know where you’re located, but if you get fast 5G service, you might see if Verizon or T-Mobile offers it in your area.

William

Teletext?

Jason Nevins

The newer Sony MILC's (a7s III, a7 IV) have anti-flicker settings where you can set the shutter speed to the tenth of an FPS ( like 59.8, 59.9, 60.1, etc.) I haven't used it personally, but it seem useful. I know you're not in the full frame system, so maybe renting a body and lens for a couple days to see if it works (and just get the footage you need and make the upgrade future you's problem) might be a good solution.

illves

Sorry to hear the result of your photography videos. I loved reacquainting myself with how cameras and film work. Your passion for the topic really comes through.

Kyle Burton

Load balancing is a pretty standard feature on EV chargers here in the UK, especially on older houses that only have a 60A service. You connect up a CT clamp to the main supply and the charger can reduce the amount of power it uses to make sure you don't blow the main fuse. If you get a myenergi zappi charger, you can also get other addons that control the water heater, solar etc.

Avery G

So the whole thing with the projector (since I went though this too) is you have a 2 or 4 blade shutter wheel and for no flickering you need a 5 blade shutter wheel or “telescene” wheel. I ran into this issue when I started trying to archive random old films I have acquired and found that everyone ran into this problem, but no one has made a solution that is other than buying a ludicrously expensive projector. I would think 3d printing a wheel would be trivial, however no one has measured a 5 blade wheel! As an example of a 4 blade heres one of the more popular ones I did. this was done on a 1960’s 3M revere tube type amp projector from goodwill. https://youtu.be/RLsUIjZn97c

Technology Connections

Interesting. Thanks for the tip! What I'm hoping might be possible is that a better camera which can do fractional shutter speeds might work. I know I got it very close to flicker-free but what I needed was a shutter speed somewhere between the two settings - and I know there are cameras which can do that. I don't know much about that feature, but I know who to ask.

Avery G

Now I did minimize my flicker by changing the speed of the projector very slightly. So Maybe in conjunction you might get it very close to flicker free.

Jake Walkenhorst

As someone who grew up during the analog film era, I am equally fascinated by the old technologies that you share on your channel. For example, my father had an old Honeywell Pentax SLR that did auto light leveling. When I discovered that camera in his closet in the '90s, I was shocked that they were able to do that without any kind of digital circuitry. I love your efforts to share how things used to be done with an audience of curious people.

Crash Cash

Re: "You should be grateful for Starlink" So I ride a couple electric motorcycles. I love 'em after 30 years of shifting and stuff. (Edit: They're my main transportation) Anyway, I'll be riding my Zero and people will jump out of their Teslas and bebop over to ask me how wonderful it is and unfortunately, Zeros suck for a lot of reasons, and you shouldn't buy one. Well. Some of them are not happy to hear that. And even when I mention I love my Energica and it's the greatest thing, they still act like I just stabbed Elon Musk.

davethetallguy

I commented on YouTube, but not sure what you read first. I worked on mechanical pinballs (and other games) from about 1976 to 1989. I think you had the right switch identified originally for the “T” chime, remember it chimes as the switch drops, not as it rises, in those central positions. I’ve still got switch blade adjusting tools in my toolbox!

Big Car

For recording the projector. Can you use your mobile phone at 60fps or greater?

MrHammond

I'm curious to the refrigerator video, as your description sounds like something really common to me (at least, here in Europe). But still curious how they would manage the correct temperature difference. My mother once bought one with two compressors (since most fridges here have just one), which was seen as a big luxury at the time, and we were very happy with this feature when the thermostat of the fridge part broke down in the middle of a hot summer... Until it was repaired, at least we could use the freezer to make as much ice as possible to keep other stuff cool.

Mike Chimeri

I enjoyed it, too, and all TC photography videos. Game Dave is another creator I support on Patreon and I'm sure he'd love to have as many views as the Olympus Pen video. Incidentally, Dave got a pinball machine whose restoration might be the subject of a later video.

TheEdgeOfRage

FWIW, I absolutely love the photography videos. I know I'm not an average viewer on that topic, since I too am a photo nerd, but there's DOZENS of us who enjoy those videos, so I hope you continue making them from time to time :)

Kevin Tessner

I came here to mention the Zappi but you beat me to it.

Simon Upton-Millard

That smart pannal is a verry good idea was pulling over 27kw last night on my 225v supply so was pulling about 120a on my 80a service, not an unusual load for me just didn't realise how high it was 2x EVs at 7kw each 2x Powerwalls at 6.2kw charging rate tumble dryer 3kw and dishwasher and washing machine that spike at 3kw for a few seconds every so often, according to an installer my house would need a 14kw heat pump as my house is 300+ years old with stone walls so not much insulation

Colin Grimshaw

Just my six pennies worth about that projector and flicker. In my opinion you will never be able to eliminate a flicker. That's because the film projector is free running and not locked. As you may be aware, here in the UK (and elsewhere) we run at 25/50fps. So for original telecine, a projection system was run at 25fps and hard locked to the studio camera system. Therefore perfect images with no flicker. When I used to run a small TV studio we used (originally) black & white VIDICON cameras and because of the image 'lag' even at 24fps we could get film onto video. This was still the case when using the Sony Trinicon cameras which were colour but still using vidicons (stripe faced). Therefore images on TV still showed no flicker. You have two problems, a projector that's not locked in terms of speed (free running) and a camera which might be hard locked to 24fps. The projector will drift up and down from 24fps and either show a dark line or will just flicker.

TwiceInEveryMoment

Have you looked at fixed wireless internet? Ours with AT&T has actually been quite a bit better than Starlink. Consistent 60-70Mbps down and 25 up even during peak hours, and it's half the price. You do need a line-of-sight to a cell tower but where you live I assume is a lot flatter. We tried Starlink for a few months and ended up cancelling it because yeah, sometimes it's over 100Mbps but usually you're lucky to get 15 in the evenings, and just a tiny bit of obstruction from a tree near the house caused it to drop out every few minutes. Honestly if you don't want to do a video about Starlink specifically I would still like to see one about rural internet tech in general.

Anthony May

Heya, I haven’t been around much lately. I’m guessing you’re referring to the Span smart electrical panel? They’re pretty ace! I did some electronics design for them a couple of years ago. They released an integrated add-on for the panel to do ‘smart EV charging’ about a year ago. I watched a Fully Charged Show video recently about MyEnergi.com, which was also very impressive integration of solar, battery, EV charging, etc, but not (yet?) a smart panel…

Circuitmike

A coworker of mine's son works for SpaceX doing Starlink stuff. They're constantly improving the satellites and launching newer generation sats. I have no idea if that means their backhaul is going to get faster or not, but I would assume it would HAVE to at some point. I thought about dumping Comcast for Starlink earlier this year and I'm kind of glad I didn't. Not only does it sound like it's pretty slow, but I heard they have, like, 6 customer service people for 300,000+ customers. That's going exactly as well as you'd expect. Don't quote me on those numbers, but the orders of magnitude are correct. I have a friend who refurbishes pinball machines. He does meticulous restoration of the artwork and paint, but sends the electronics out to someone else to deal with. I've talked to him about maybe doing some electronics work for him but we haven't made that happen yet.

OzzieGerff

You can fix the lock relay (the buzzy one) by making sure the moving piece of metal is demagnetized and adjusting the spring to be tighter. most importantly check to make sure the moving piece of metal is seated properly and is not too lose or sloppy. Sometimes you have to use pliers to bend the metal frame to make sure the moving part stays in place.. I sent you a message on patreon please look. Ozzie English - Chicago Pinball

Gurlin

For the record, i liked all the photography videos so far and would love to see more. They were some of my favorites. It has in fact inspired me to get the old equipment from my dad out of storage and give it a shot!

Jonas

Maybe record at 120 fps and merge five frames together somehow hehe :D

Zachipotle

I love ceiling fans PLEASE make the ceiling fan weight rig

Clarke Macbeth

Protogen fursona. How original. 🙄

Joel Devlin

don't ever stop being thrilled by the dark magic of automatic exposure, you aren't alone. go with the demographics as you see the need, but rest assured there are plenty of folks out here who love these "this thing which we all take for granted is actually done with wizardry and here's the wizard behind the curtain" videos