Home Creators Posts Import Register Favorites Logout

Content

Please find the resources to accompany the "valves and gauges" puzzle tutorial at the following Google Drive link. I've placed the Arduino code, the Wiring diagram, and all the 3D models into separate folders, but I suggest you download the entire archive and extract it to your local PC.

https://drive.google.com/drive/folders/1TPBwg05xp1pznPjzpdAoNM2ulVksOuKl?usp=sharing

Parts:

The pipes and valves were all purchased from my local B&Q (if you're in the U.S, I think that your equivalent is "Lowes" or "Home Depot"?). I also purchased a pipe cutter and a pipe expander (https://www.amazon.co.uk/Techson-Expander-Refrigeration-Universal-Conditioner/dp/B082FWYYMZ) which made the job of inserting the components and making the pipe network much easier.

The servo motors are the cheapest blue SG90 9g micro servos that I had lying around and are available almost everywhere. It has to be said that the quality of these motors is not very good! But, since they only have to move a tiny plastic needle that only weighs a gram, I think they should be fine for this application. You could upgrade to the metal-geared MG90s or even a full-size servo if you really want. https://www.amazon.co.uk/Micro-Helicopter-Airplane-Remote-Control/dp/B07KPS9845

The only other interesting component is the PCA9685 PWM driver. This is really handy if you ever want to control more than one servo from your Arduino/RaspPi, as you can offload all the processing away from your microprocessor, and set channels using a convenient library call. It also simplifies the wiring! https://www.amazon.co.uk/SunFounder-PCA9685-Channel-Arduino-Raspberry/dp/B014KTSMLA

Please do ask if you have any questions! Cheers.

Comments

Remco Dresen

Hi, is it possible to change the maximum value of the light? I used another led and it reaches maximum of 500 instead of a value of 1024, so the motors just turn 50% of the total degrees

Remco Dresen

Hi, Ive got a question. When powering from a external power supply, the servos wont work again. Any idea how this could happen? When powered by USB ( computer ) it works well.