Home Creators Posts Import Register Favorites Logout

Content

Hi folks, hope you're doing ok!

Pretty much every project I create here starts from a basic Arduino, ESP8266/32, or RaspPi board, and then describes how you can add various components to that to create the controller for a particular type of puzzle/prop interaction.

That format works well for me, and I like that it provides the opportunity to describe what each of the components do, and how you can modify the design to change the functionality (and therefore the experience for the player). I want to encourage people to tinker, to play around with things, and make them their own! Not only does it mean you can customise them, but I also think it really helps to have a deep understanding of what everything does so that you can debug/fix any problems should they arise.

BUT,

I also recognise that not everyone has the time or inclination to invest in electronic design, not everyone is comfortable soldering tiny components, and that some business owners would prefer to have more of an "off-the-shelf" system. Of course, there are several companies that already manufacture those - COGS, Escape Room Supplier, BAC etc. The problem with those is that they're all proprietary, closed-source systems. If you want to change the functionality, or understand why it's not behaving as expected, you're stuck with contacting the supplier.

So, here's a thought:

What about a line of escape room controller "shields" that could slot onto an Arduino UNO/Nano/Wemos D1 Mini/etc? You could either purchase them pre-assembled, or as build-your-own-kits, or download the Gerber design files and have them manufactured yourself. Rather than trying to make a single monolithic "do everything controller" (which inevitably therefore needs configuration), I'm thinking of smaller specific modules - something a little bit like the common Keyes "Sensor Kit", like this: https://www.amazon.com/KEYESTUDIO-Sensor-Arduino-Raspberry-Micro/dp/B016KIXSMM  but specifically designed for commone escape room scenarios.

The code logic itself would still be uploaded onto a regular Arduino/ESP board exactly the same way you do currently, and you can examine/modify the code as you want, but then you'd simply slot it onto the relevant hardware.

Would this interest anyone? If so, what requirements would you like it to have? What controller would you be most familiar with using? (I _think_ most people use Nano or UNO, but I might be wrong!) Let me know your thoughts :)

Comments

David Baker

Could you have an everything box with standard sensors plugs and pc software to create your game? So, one shield can be used for anything? also have a power supply and relays built in.

Nick Rose

Hey Alastair, my perennial "I'm going to do this" job is a shield for a wemos/esp32 that sends all of the 3v3 pins through a logic level controller to make them 5v pins, for the sake of hooking up relays and neopixels etc. I usually just settle for a disorganised rats nest of wires and wago connectors but I'd definitely order a bunch of PCBs if it wasn't for my painful Kicad skills!

Ken Mullins

I agree with you that a universal "hat" would be great for these projects. The issue that I see is that there are so many different pin configurations even in the ESP arena let alone Uno's, Nano's, Mega's, Micro's, Pi's and Pi clones. What about a device that had it's own set of GPIO with an inbuilt LLC to change from 3.3V to 5V and vice versa. This could then be connected to your device of choice through SPI or I2C to either leverage of the WiFi, BLE, RF or just pure processing power (PI) without the need for multiple hat designs. Just a thought. :-)

Myles

Personally I already make my own pcbs, but as far as voltage goes, what about building the system to use 5v, and stepping down the voltage down on the modules that require it, rather than the shield? (Assuming you’re building custom module boards)

Pue Gonzales

off the shelf sounds good. dont have much time to tinker around with PCBs and etc.

Robert Nelson

This probably would have been a great intro for me when we started a year and a half ago. Since then, I've learned so much (from you and other resources) that I feel like it would again create limitations like some of the other off the shelf products. I'm not switching from Arduinos to ESPs for our next game.

Adam Waite

I think there would be a huge market for this. I have noticed that on sites such as AliExpress they sell canned puzzles, but having the different configuration options and ability to adjust the code would set you apart. For a lot of people, this would be a winner, but for me, I personally learn a lot more from the current projects you have offered to us.

Nicolau dos Brinquedos (edited)

Comment edits

2026-09-07 18:00 Yeah, please! I have made some props using a Chinese version of Arduino, produced by DiyMore, called Arduino Strong (the have various versions Arduinos Nano, Micro, Leonardo, Uno, Mega and even ESP8266). They provide the boards with a slightly more powerful voltage regulator and each GPIO also has a pin with VCC and GND, which greatly facilitates the connection with the single modules. I have also acquired some specific controllers for escape room in AliExpress and have always studied their solutions. I acquired an STM32-based controller with more inputs. Normally the outputs are just a Relay and audio module.
2022-11-08 14:23

Katelyn Cahill-Rowley

Hell yes! At this point I've developed preferences and use ESP32 every time I reasonably can, because I lean heavily on MQTT and node-red. But those pinouts vary a fair bit, yeah? I use DOIT ESP32 Devkit v1, they're cheap and work. Anyway, for the sake of beginners if nothing else I say absolutely. Uno is surely the most widely used. If your shields either included Wifi, or fit ESP32, so I could still do my mqtt thing I'd be manically happy and use them whenever I could

Jeff Keys

I like the idea of HATs if you could standardize on one platform. How to pick one platform that is stable, inexpensive and universally available. Espressif? The ESP32 platform are far more powerful and less expensive than (genuine) Uno.

Matt Brown

I'd be interested. Would using the grove connectors be an option? That would allow for additional products to work together. I was going to go that route to get away from wires popping out of breadboards, but ended up going with the P1AM-100 instead. Still, I'd be interested.

Drew McGiffert

Fantastic idea! I actually picked up a Keyes sensor kit when I started out to learn how all the different sensor options worked. Having something like this that is escape room ready would be a dream. UNO has been the easiest for me to work with, it's been much more available in Australia at least, and the volume of ideas and info on the internet around the UNO has been a great help. I agree with some of the other comments that there are better options, but UNO has been the easiest to work with, except for networking and I'm starting to find MQTT is important and ethernet shields can be tricky to work with. I've picked up a couple of 'pre-made props' from China before, and have then ended up backward engineering them and developing my own code anyway, so being able to plug and play with modules and edit code would be incredible.

Masher

Are you talking about shields along the same lines as existing shields that sit on top of (and plug into) an Arduino UNO board? That wouldn't work for me, as once I've programmed the Atmega 328, I take it out of the UNO board and shove it on a bit of Vero. Although, thinking about it, there's no reason why I can't plug a shield into a bit of Vero too, I suppose. :)

Alastair Aitchison

Thanks all for the comments! OK, so it seems there's some mixed points of view - many of you are already creating your own controller boards, which is great. For those folks that don't, the absolutely valid concerns are about which microprocessors and features to support; I don't want to create yet another system that is either a.) simple, but too minimal to be useful, or b.) feature-rich but too complex to be useful!

Alastair Aitchison

Perhaps a better approach would be for me to do a tutorial on how to create your own shields? That would also nicely address the question I often get asked about "I've made this circuit on a breadboard, but how do I use it in a production setting?"