Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Hey Folks,

Here's the first in a new series of engineering tips videos. The format is well suited to doing requests, so I'll be using it to cover those requests that have already come in, and I'm happy to cover anything additional that you might want to see.

Cheers,

Chris.

-------------- Video Notes: ---------------

 Amazon Affiliate links:

Cameras used in this video: 

Panasonic GH5 - https://amzn.to/2rEzhh2 

Panasonic X920 - https://amzn.to/2wzxxdT

Tools & Shop Products:

Optivisor Headband Magnifier: http://amzn.to/2HFg1FU

Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ

Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX

Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw

Files

Previews only

8 Old School Tips For Better Hand Filing

8 Old School Tips For Better Hand Filing, by Clickspring This video was done as a one-off viewer request but I like the format so I'm going to keep it going as a request driven series - Let me know what you want to see covered in the comments below - Cheers :) If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring ________________________________________________________ A very special thank you to Patrons: Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com) Glenn Trewitt Christopher Warnock John A McCormick Mike Manfrin David Wurmfeld Lonnie Koehn Michael Harmon Jim Popwell Gary Levario Rollin W. Patrick, Jr. Pete Askew Larry Pardi Andre van Soest Andrew Smith Bernd Fischer Rudolph Bescherer Jr Adam Slagle Jack Cause Jeremiah G. Mort Olof Haggren Florian Ragwitz Tim Bray Steven R. Crider ________________________________________________________ You can also help me make these videos by purchasing via the following Amazon Affiliate links: Cameras used in this video: Panasonic GH5 - https://amzn.to/2rEzhh2 Panasonic X920 - https://amzn.to/2wzxxdT Tools & Shop Products: Optivisor Headband Magnifier: http://amzn.to/2HFg1FU Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX Hegner Scroll Saw: https://amzn.to/2IhteVW Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw Digital Calipers: https://amzn.to/2IkFh4O Abbreviated Transcript: 00:42 I use Swiss made Grobet files for the vast majority of my filing and I find them to be excellent. So If you're looking to track some down, be sure to confirm that they are actually made in Switzerland before you buy, and keep an eye out for the bunny on the tang. 01:22 A safe edge like this effectively isolates the cutting to a single surface, and it forms a key part of my filing technique. Because when I'm filing something that needs to be precise, like for example a rectangle thats required to be dead on center. I like to have the basic target profile formed, very early in the filing process, before I use up too much of the available metal. 02:49 Next I identify the critical corners of the workpiece. These are the locations that must be well positioned for the part to be acceptable. And then I start the cut working directly towards those corners, with the objective of establishing the overall shape whilst using up as little of the metal margin as possible. 03:32 And its not unusual for this last part of the process to take up most of the time. Because there's often only a handful of file strokes between a tight and a perfect fit. The very last thing I want to do is take it too far, and remove too much metal. Now this idea can be applied to just about any profile, whether it be internal or external. 04:07 If I get the corners correctly established early, then the orientation can be locked in. And the whole shape can be slowly worked toward the final profile. Now of course that's the ideal, but it rarely goes according to the plan, which leads to tip Number 4. 05:36 Now there is an even more immediate technique that can be used to pick up errors, as they occur. Just prior to each cut, a light cross grain pattern can be made on the surface of the work, and then a light can be positioned to make that pattern more visible. 06:14 Because it means that rather than reacting after completing a surface, I can take a much more proactive approach while the cut is in progress. And it makes creating a taper or dealing with a localised error easier too. Just mark the region where more metal needs to be removed, and then concentrate the work there. 06:59 And although the effect is quite subtle, the shop itself has a few reference edges too, that can also help the process. Aligning the work with the vise, and then the vise with the bench means that all of these edges that are sitting in my peripheral vision as I work, and can now also give me cues for better alignment of the file. 07:38 And the fact that its held with both hands means that there's a good controlled grip to keep it that way. So the technique is perfect for delivering a very precise surface. Its also an excellent technique help generate on 2 or more parts at the same time. 08:47 And the same idea can be expanded to generate more complex shapes using guides, like for example the crossings on this wheel. The shape near the center of the wheel needs to be exactly the same for each opening, and a filing guide makes this much easier to achieve. References: "Watchmaking" by Daniels: http://amzn.to/2FH3cyh "Workshop practice Series": http://amzn.to/2DyPs2D The Nicholson Guide to Files & Filing: http://www.nicholsontool.com/MagentoShare/media/documents/nicholson-guide-to-filing-2014.pdf 8 Old School Tips For Better Hand Filing, by Clickspring

Comments

Mike Davey

Thanks Chris, I alway enjoy and marvel at your persistence and steady hand when filing. Gives me encouragement to keep at the filing and finishing I do on my own projects. I would chime in on your comment to have good files. I recently got a new top quality #4 pillar file. My wife immediately noticed the finish of a of a part completed with it and it was simpler to make look good. Also, pillar files normally come with safe edges, For those that haven’t used one, I’d highly recommended giving one a try.

Gregor Shapiro

Chris- Do you clean with a card or steel wire brush your files often? I find I have to do that but it might be because my files do not have optimum teeth profiles for the metals I work...

Sean Kirby

G'day Chris. Love your work, but particularly this video. I have a trade background, and had to learn filing at trade school as part of the general skill set. I hated it at the time, but several decades later I now think it was the single most useful general hand skill they taught us, and I wish I had paid more attention and done more practice. Our filing teacher was an old German fella, trained back in the pre-WW2 days when it was a 7 year apprenticeship and your master basically owned you. First day of classes with him he just said to us "Watch": Then, using only basic hand tools and marking blue, he took two bits of 3 x 100mm plate mild steel, and proceeded to mark, cut, and file a T from one and a matching T hole in the other. You couldn't see a single ray of light in the fit, including the corners, and the edges were all perfectly flat and square with the faces. Took him less than two hours, and he didn't appear to be in a hurry. Then he said to us: "Your turn." Two days later not one of us cocky young first year apprentices were able to even get close to copying what he had done, let alone in a couple of hours. It was a good lesson. :)

Kirk Jensen

A new Clickspring video is a good day! I can and do watch all of them over and over. Always get something new on each pass.

Adam Ackels

Another mighty fine produced video, very well executed. For those reading my comment, I'm a Locksmith for 27 years now. Chris, my Grobet file is shaped "pippin"... That thing is the 6 inch version, in #4 (extra fine) with a small price tag of $80. The part number is 31.269. For my work, it's very controllable, locks normally have a fair tolerance, about 10 thousands or so. Just like Chris mentioned, you need to be patient, take your time, and make sure you don't get carried away. It doesn't matter what your building, be patient. Make sure everything is as it should be, the last thing you want is to start over. Not only is it time consuming, but down right aggravating. 😁

Michael Lloyd

Great start to the day, thanks for taking the time to make these videos Chris

Anonymous

Thanks for another great video. Nice job. Do you ever "Chalk" your files.

Anonymous

Ooops! should have been a question mark at the end of the last sentence....

Bill Yester

Excellent video, as always Chris. Thanks!

Anonymous

Thanks for another great video Chris, looking forward to the next one!

Dylan T

stupid question... do files wear out?

Bruce Edney

Thanks for another great video Chris - Could you list some of your most common file sizes and types?

Al McKague

Great video again. Filing is one of those skills that is glossed over. Watching your video reminds me how badly I use a file.

clickspring

Hey Gregor, I often chalk files, but I don't use file cards at all - I find that its kinder on the files and more effective to push out the pinned metal with a scrap of brass. This is one of the tips that got the chop from this video, but when I do a follow up on this video I'll include both chalking and cleaning with brass - Cheers :)

clickspring

So true - nothing quite like the pain of knowing you've got to start over on a complex part... :)

clickspring

Yes I do Bruce, particularly the larger files - I'll probably include chalking in a follow up vid :)

clickspring

Yes they do Dylan, they're just like any other cutting tool really - Its largely dependent on the material being worked, and to a lesser extent filing technique. I get very long life out of mine because I generally work with soft materials like brass. But I know of one very successful clockmaker who simply accepts that he will wear out a set of brand new needle files every time he makes a chronometer detent, because he's working with steel, hardened for the last few steps - Cheers :)

clickspring

Hey Bruce, the most frequently used shapes I have are tri-cut, square and barrette, and I have them in cuts 2, 4, 6 and 8. That small selection probably covers 95% of the filing that I do - Cheers :)

Gordon Burns

Another fine video, Chris mate. My two-penn'orth... 1) When using a standard bastard cut, second cut or smoothing file, make sure the working surface is at elbow height. It's far easier to maintain squareness when your arm is acting on the same plane between elbow and hand. 2) Train your muscles to exert the same downward pressure with the hand on the handle and the one on the tip (depending upon whether you are left or right handed). Equal downward pressure will ensure squareness across the work piece. 3) After draw-filing with a smoothing file, stroke the file with chalk... it blocks the tooth depth and renders a much smoother surface (and can be easily removed with a file card). 4) After chalk draw-filing, improve the surface to a finer grade by draw-filing with fine emery cloth wrapped around the file. For an even finer finish, draw-file with ever increasing grit 'wet or dry' silicone carbide paper to 400 grit, 600 grit or more, up to 2,000 grit for a near mirror-like finish. Just some tips from a bloke who worked his engineering technician apprenticeship in an engineering tool room during the latter half of the 1960s, in the machine section and the fitters' benches. That's where the job description comes from, a skilled fitter/turner. Strange that only turning is mentioned, paying no deference to those whom operated milling machines, surface grinders, metal shapers or horizontal/vertical borers. Now I'm rambling again, Chris, for which I apologise. Keep up the good work, mate... whatever you're doing, you're doing it correctly.

Marc Banks

One thing that I don't see mentioned often is the storage of files. They're just like any other cutting tool, if you let them get rattled around and bumped on other files or tools, they will get dull quickly. I keep mine in cardboard sleeves when not in use to make sure they stay sharp as long as possible.

Anonymous

Thanks for a very useful video and also some great tips in the comments.

m_tini

Love the new stuff. Do you prefer handles or no handles on your files? I work with brass keys as a locksmith, and I don't think I do as much filing as you, I do like a file with a handle. What do you think?

clickspring

Great question mate - The vast majority of the filing work that I do is non-powered (ie not on the lathe) and is done with needle files that have a small shank style handle built into them. I really like the agility these slender handles provide - they make the file seem so light and precise - so I just use them as-is. On the lathe I always use a wooden handle, no matter what the file has built into it. I have a small selection of wooden handles in a drawer, and I just tap one on as required - Cheers :)

Rich Cizik

Surprised you didn't mention about work height. General rule of thumb for hand-fileing (at last here in the USA, turn of the century through at least the 1950's) is that your work should be chest high, this is to make sure your arms are only moving in 1 polar axis (radial/horizontal), any lower and your arms are moving in 2 polar axis (radial and angular). You eluded to it, but didn't explain it, your light source should be located on the opposite side of the work. The light reflects and shadows the workpiece, as you are filing, creating patterns that are easier for the human eye to pickup, showing how the file is cutting (especially when it starts clogging). This is why most filing stations were against the factory and workshop walls with large windows behind them and not a solid wall. Keep up the great work, can't wait for the next A.M. Episode.

Anonymous

Once again we appreciate your communications very much. A small addition: we like to use a height adjustable backrest with a roller to support the free end of the file for precision work. A suggestion for a topic: My knurling is unpredictable and often messy. I have seen you showing it in a very controlled and elegant way with nice results. How do you do it?

Deano

Oh master, what is the camera(s) you’re using?

clickspring

Panasonic HCX920 Camcorder - I recently bought a GH5 but I haven't figured out how to use it yet.

MAURI HAKALA

Oh I hit Enter, a dealer in your country. I have been told that German F.Dick an Pferd file are reasonable.

clickspring

Hey Mauri, yes I have separate sets and migrate the brass files to the steel set as the lose their bite - Cheers :)

Martin Anderson

After vanishing down a rabbit hole of international machine-tool outsourcing, white-label production and general confusion, it appears that Glardon Vallorbe files are still manufactured in Switzerland, are well-regarded, and are also widely available (relatively). Rio Grande carries them, and they come in a "Valtitan" version which is 72HRC. Amazon has them as well, if you want to take a chance on getting a counterfeit instead... Grobet meanwhile seems to have has moved their production around, and I can find folks online complaining about their production quality having slipped. "Grobet USA" in particular is not very well-regarded (eg: among people who sharpen saw blades).