Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

A new record for video length folks at 18 minutes, and without doubt the most satisfying one to produce so far. It covers a fairly wide range of shop activity, so I do hope you enjoy it :)

Erratum from the previous video: In discussion with my burl supplier for the scientific name of the wood, it turns out that the clock base is in fact a slice of the much rarer Red Morrel, rather than Red Mallee. They are both from the Eucalypt genus, with somewhat similar burl characteristics, even though the Morrel grows as a genuine upright tree as opposed to the low scrub Mallee. The Morrel is apparently much richer in color and texture, and you can see the yellow highlights (of what I assume is sapwood) in the piece that I have used. I wouldn't normally correct a video after publishing, but with 2 videos going out at the same time giving contradictory information, I'd prefer to avoid the email meltdown. So you can expect to see the Spare Parts #14  icon and video reflect the change from Mallee to Morrel before general release next week.

Files

Previews only

How To Make A Clock In The Home Machine Shop - Part 19 - Making The Legs And Base

Making The Legs And Base, by Clickspring. In this video I make a change to the support structure of the clock, and do a little bit of woodwork with a beautiful piece of Red Morrel Burl sourced from Djarilmari Timbers in Western Australia. http://www.djarilmari.com/ If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring ________________________________________________________ A very special thank you to Patrons Dan Keen, Samuel Irons and Sean Kuyper. ________________________________________________________ You can also help me make these videos by purchasing via the following Amazon Affiliate links: Cameras used in this video: Panasonic GH5 - https://amzn.to/2rEzhh2 Panasonic X920 - https://amzn.to/2wzxxdT Tools & Shop Products: "Solidworks 2013 Bible": http://amzn.to/2FObS1D Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ Hegner Scroll Saw: https://amzn.to/2IhteVW Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw Interapid Dial Test Indicator: http://amzn.to/2FPInwH Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF Abbreviated Transcript: 00:23 The classic Y Frame design upon which this clock is based, was traditionally a very ornate and elaborate mechanism, and while the current arrangement is perfectly acceptable, I'd like to push the final result just a bit closer toward that classic tradition. 00:53 And for the base, I've been very fortunate to find this beautiful piece of Red Morrel. Its a species of wood native to Australia, much prized for its rich and highly figured burl, and it'll make an excellent contrast with the brass of the clock mechanism. 01:18 Now you wont be surprised to learn that I wanted to see how the legs turned out before I committed to cutting the frames, and they're a lot like the clock pillars from a previous episode, in that there are some contours that I'd like to have exactly the same across all 4 components. And like the pillars, I used simple form tools to make it happen. 02:01 I'm turning an extra chucking section, as form the basic profile. The precursor shapes for the rope knurls were formed, and then I took a taper cut along the body of the part, to reduce the workload for the second form tool. Now I've recently started forming rope knurls while rotating the chuck by hand. 04:13 Next I took care of the initial surface finishing, using a crossing file to help maintain the profile curve. And at this point most of the hard work has been done. It'll still need some more polishing before I'ts complete, but the only remaining feature to be put in is the small dome at the top. 09:04 Now the position and vertical orientation of the mounting holes for the new legs is critical. Even a slight error would be glaringly obvious on assembly, and most likely mean scrapping of the frames - an unthinkable outcome. So I'm taking this next step very carefully. 09:21 I've turned up some pins to be a close fit into the lower frame pillar holes, and I'm using an indicator to position the work upright using those holes as the datum reference. An edge finder locates the position of the new holes, which were then drilled and tapped to accept the leg mounting fasteners. 10:18 And speaking of fasteners, there's quite a set required for this part of the build. 4 small screws are required to mount the legs to the frames. 4 of these larger bolts will be used to mount the entire mechanism to the base, And a set of 8 timber screws are required to fasten the brass feet to the base. 12:47 And I don't have much in the way of woodworking power tools so I'm doing the work on my small mill which is not really ideal from a mess perspective, but I've covered up everything in the shop and I'll give the mill a thorough oil and cleanup at the end of the job. I'm using standard carbide tipped router bits and a shop made flycutter for the cuts, 13:27 Now to some extent using this piece of wood for the base is a bit of an experiment. I live in the tropics, so there's going to be an issue with high seasonal humidity. 13:42 So there's a question mark over the long term stability of this piece of wood, and I may yet have to revisit this aspect of the build in the future. But I really would like to be able to use this type of highly figured burl on future projects, without having to go through the hassle and cost of resin stabilisation. 15:26 Once the features were machined I applied a shellac finish, using the French Polishing technique. Click on the link to see a separate video showing that process. References: John Wilding "Large Wheel Skeleton Clock" construction book can be purchased online from Ian T Cobb: http://www.clockmaking-brass.co.uk/clock_construction_books.html Red Morrel: https://florabase.dpaw.wa.gov.au/browse/profile/5701 Making The Legs And Base, by Clickspring.

Comments

Al McKague

The combination of the wood and the highly polished brass is amazing. I like the new design of the legs compared to the traditional one. Thanks again.

Luke Pettit

Beautiful as always Chris. So you're up north eh, way too hot for me in summer. I'm in the ACT so freezing and seriously liking the idea of living up north during winter :-) How do you find the time and patience to make such elegant videos along with the clock. That Red Morrel timber is gorgeous.

kevin todd

Amazing.......Beautiful as always

Zachary Hodge

I'm so ready to see the finished product. Flawless machining and camera work as always. I'm happy to know I live in a world where someone like you exists. Your use of napkins, paper and tape to protect the finish is very awesome and hilarious to me at the same time. There are so many moments at my work where I'm cradling a part with such said things telling myself, "You better not drop this eight hour finish or you have to do it all over again." Thanks again for the outstanding work Chris.

Brandon Fayer

Great shot on the blue dissolving off the washers. I also really liked where you positioned the pre and post shellac piece in the same shot so you could transition between the two.

PJ

Once again Chris I am at a loss for superlatives! All I can say now, is you Really honored the Morrel, the wood screws are artwork, setups ingenious, attention to detail off the charts...and sure wish Hollywood could takes some notes from your videography. Seeing it in this state...it just sings in 7 part harmony to me! Thanks Chris...made my day! ~PJ

Nelson Collar

I must say one of your better. Very nice machining and that wood working expertise was top shelf. Love the brass feet which added another rich look. You are going to work real hard to top that. Top of the day to you.

Scott Clausen

Once again a superb video. I only wish we were having one a week instead of having to wait. At first I was put off by the feet but came to see that they add a very nice touch to the whole clock. BTW, have you ever done anything on setting up your lathe and mill before using? As a prospective metal worker it would be great to see what some of the things a beginner should do to avoid problems.

Nelson Collar

Chris, I can not help but see some of the tarnished finish on the brass. Is there something that you will do to seal the finish under? You have worked so hard to make it look so good and see it just makes me wonder. Looking good as usual.

clickspring

Hey Nelson, to some extent lacquer can be used to slow oxidation, but it wont halt it entirely. The only real protection is to electroplate the surfaces with a non reactive metal like gold. In reality though, 99% of the worlds clocks are left to develop a natural patina. I will polish and lacquer the frames, legs, pillars and a few other bits, but much like getting old, its better to simply accept the natural oxidation process, and enjoy the extra character it brings over time :)

Eric Hobbs

Wow, outstanding job Chris!

clickspring

You should see me carry the thing into its little storage space - you've never seen a grown man so paranoid of dropping something in your life!!

clickspring

Mostly by missing out on sleep! This latest one was very difficult to upload due to Telstra failures in my area. They can't bring that NBN online quick enough for me :)

Matthew Prince

I know you've probably been asked this like 200,000,000 times but What program are you using to plot all of this out? Do you design the part in CG first or the other way around? This was a great video though, and I'm really enjoying the longer videos.

Steven Bierlink

My wife always hears the audio and says "oh you're watching aussie's world again?" I love it.

Andy Scott

Looks like SolidWorks. One of the most powerful and user friendly CAD programs out there.

clickspring

Yes SW, although consider Fusion360 - same parametric functionality and free for home users

Tom Colson

Hey Chris, how many times did you have to stop and think before you cut into those frames??? Must have been a tough one. Great episode as always. Gives me a real appreciation for what form tools can to in brass, even on modestly sized machines.

clickspring

I was more than a bit nervous about that one Tom!! I faffed about for days looking at it, checking, rechecking, walk away, have a cup of tea, come back check again... There was going to be no going back after that cut and I really didn't want to mess it up!!

Finn-Malte Drees

I really like how the feet and the base turned out. Beautiful!

Nils Rohwer

Hi Chris! This is just fantastic, another great and inspirational video, I'm going to go make something now. I wanted to ask, how do you get your beautiful panning shots around your piece at the end?

clickspring

Hey Nils, terrific to hear that! I made a little mechanism to move the camera in an arc

Samuel Irons

When you are done with the clock of all clocks, are you going to do a global tour with it?

Aaron Caviness

Its just beautiful....... like looking into your new borns eyes for the first time!

Joe Fisher

I can only imagine your excitement the first time you tipped the whole thing upright! Lovely work, as always.

Michael G

I love to see your videos, always makes me want to get back to my clock build, still early on, and a little out of order but am working on the plates for the John Wilding Castle clock. Have them all cut out and have started filing.

Edgar

Wow! Your an artist, beautiful work. Thank you for the videos.