Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content



Hey Folks,

A quick update for you on my progress with the next video drop.

I had planned to cover the escapement construction in a single episode, but there is so much good stuff to show in this part of the build, the video has grown to over 25 minutes, with still a bit more shooting to to be completed. 

I'm reluctant to cut too much of it out, so I'm splitting it into 2 separate videos of approx 15 minutes each. One covering some of the escapement fittings, and the second covering the pallets (above) and first tick of the mechanism. Its led to a bit of a delay in the release, but I think it will be a better result leaving more detail in and releasing an extra episode.

The first of these videos should be up for $3+ patrons by the end of this week, and the second one will follow approx a week later.

Cheers,

Chris.

Files

Previews only

Comments

Edgar

The more you get into the details of how and why, plus the techniques the better. Thank you for that. It is much appreciated.

asterisk.jpg

Ohhhhh, that's a beautiful piece of work. I don't mind if it's a week or a month or a five-minute or a thrity-minute video. I can't wait to see this clock evolve even more!

Anonymous

I can't speak for everyone but I would happily watch your videos even if they were an hour long each - beats most everything on TV if you ask me. Can't wait to see it, thanks for all of your hard work :)

bo

in a word: stoked. glad you're still with us - was beginning to wonder if you'd taken a break! thanks for the update - your videos are some of the best I've ever seen!

Derek McAllan

Take your time Chris, your videos are always, ALWAYS, worth the wait :D Look forward to it.

Jerry Vella

i agree, leave it longer and show more detail. cheers chris

Paul Busby

Sweet two video's instead of one :)

Anonymous

Yeah, I'd be happy if your videos were longer, can't get enough. Cheers.

Stephen D Mills

*Only* two 15 minute videos?! Slacker! Hah! Seriously though, love it all Chris. Thank you for everything!

Simon

Looking forward to it Chris!

Anonymous

is it the end of the week yet? /s ... can't wait for the videos!!!

Anonymous

Any update? It's been a month and a half since your last video. Looking forward to more.

clickspring

Hey Jeff, yes I posted a video last week, should be just above this one in your feed. Another one out in a few days. Cheers, Chris.

Colin Glanville

Hi Chris, as a wannabe clock maker, part way through the ME Jubilee Clock, a video devoted entirely to finishing and polishing would be superb. Just looking at the mirror finish on the pallets makes me wonder how you get there. I can never get rid of every last scratch .

clickspring

Honestly, it can be a bit of a chore getting a good polish, and I'm rarely happy either. The last video will be on the finishing, but I won't be spending much time on the steel parts, for the most part they are about as good as I can get them! I use diamantine powder on a tin lap for black polishing, as per George Daniels' "Watchmaking". Still a long way to go before I am truly happy with my results, but I'm getting a more consistent result than I was a year or two ago :)

Anonymous

Cheers for the update Chris.

Factotum Industries

Great work as always. Any chance you can point me in the direction of a good set of escapement / needle files?

Toby Griffiths

Hi Chris, Just received my copy of the Wilding Clock plans. As it is all in Imperial sizes and seeing as you have already drawn it all up on a computer... is it possible to have a copy of your plans for the clock? It would make life so much easier to have a modern, printable copy... not just for me, but all of your fellow Patreons. Cheers and keep going!

clickspring

Hey Toby, I'd love to but I think it would cross a line regarding intellectual property. If you're game, get onto Fusion360 and have a crack at modeling it for yourself. Its an excellent project to teach yourself CAD :)

Toby Griffiths

Hi Chris, I'm trying out Fusion 360. It's nice and easy, I have only ever used 2d AutoCad. I need to know, what Sherline motor and belt are you using to cut the wheels? Myself and the guys at Sherline are not sure.

clickspring

Hey Toby, this is the motor/speed control I use: <a href="https://www.sherlinedirect.com/index.cfm?fuseaction=product.display&product_id=1242&CFID=129198364&CFTOKEN=66820455" rel="nofollow noopener" target="_blank">https://www.sherlinedirect.com/index.cfm?fuseaction=product.display&product_id=1242&CFID=129198364&CFTOKEN=66820455</a> and the belt is the extra long version. I can't seem to find the part number using their search, but I recall speaking to the main guy in the warehouse to track them down when I purchased them.

Toby Griffiths

Thanks Chris! And a 4 inch rotary table? Looks like a tiddler. Sorry for my many questions....