Home Creators Posts Import Register Favorites Logout
haven't archived this post yet. have a subscription? use the importer!

Content

Hey Folks,

Here is the first of the two escapement related videos that I mentioned in the previous post. I am aiming for the second one (showing the first tick of the escapement) to be up by next Sunday, although I suspect I will be a day or two later than that due to work life getting in the way.

Hope you are all having a great weekend!

Cheers,

Chris

Files

Previews only

How To Make A Clock In The Home Machine Shop - Part 20 - The Crutch Assembly And Eccentric Bushing

Making The Crutch Assembly And Eccentric Bushing, by Clickspring. In this video I make a start on the escapement of the clock, starting with the crutch assembly and a component that permits a slight adjustment of the pallet depth of engagement with the escape wheel. If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring ________________________________________________________ A very special thank you to Patrons Dan Keen, Samuel Irons and Sean Kuyper. ________________________________________________________ You can also help me make these videos by purchasing via the following Amazon Affiliate links: Cameras used in this video: Panasonic GH5 - https://amzn.to/2rEzhh2 Panasonic X920 - https://amzn.to/2wzxxdT Tools & Shop Products: "Solidworks 2013 Bible": http://amzn.to/2FObS1D Sherline Lathe: http://amzn.to/2pnXM19 Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: https://amzn.to/2ITfeTa YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: https://amzn.to/2G7ylv6 Hegner Scroll Saw: https://amzn.to/2IhteVW Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw Blue Matador Abrasive Paper - https://amzn.to/2IAFiBT Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX Loctite 231097 603 Retaining Compound, 10 mL: http://amzn.to/2pid6vR Abbreviated Transcript: 00:21 Generally speaking the escapement is considered to be the pallets and the escapewheel, but there are usually a few extra components required to make the whole thing work, and its those related components that I'm making in this video. There's an eccentric bushing that permits a small adjustment of the pallet depthing with the escape wheel, enabling fine tuning of the escapement. 00:41 And then there's the crutch assembly, which receives the energy released by the escapement, and transmits it to the pendulum to keep it moving. 02:17 With the taper formed, I transferred the work to the mill, to put in the other features. The embryo part can now be cut from the parent stock, to form the small clamping slot. But before I make the slot, here's a closer look at the fastener hole. One half has been drilled for clearance, and the other half is at the correct diameter to be tapped for the fastener thread. 05:30 I've got the work set up on this pumice stone to protect the bench, and the heat is being applied using a small butane torch. Up close, you can see the flux run, leaving behind a tiny matrix of silver solder adjacent to the join. A little more heat, and then that solder melts and wicks into the small gap between the parts, while the excess solder forms a nice fillet. 06:56 And I'm happy enough with a tool finish for this part, so I'll leave that as the final surface. The spigot has done its job, so that can be taken off with some abrasive paper, leaving a grained surface finish on that underside surface. The final step for this part is to use needle files and abrasive paper to bring the perimeter to final shape and dimension. 09:06 The bend locations are positioned roughly one third in from each end, and it really is just as simple as getting a good hold of it in the vise, and giving a careful push until its about right. The 3 parts of the crutch assembly are now complete, so a small spot of Loctite on each end is all that's required to bond them together. OK, now on to the eccentric bushing. 10:57 The central axis was located with a wiggler, and then a tiny offset was introduced to the spindle, so that the hole would be formed off center - as the name of the part suggests. 12:46 All three were made in the same way that you've seen in previous videos, using the small lathe. They were then hardened, tempered, and then polished and blued. Ok, so with the fasteners complete, I can start to put a few of the bits and pieces 14:56 Particularly since the eccentric bushing can an additional offset angle depending on where it sits in its rotation. Once it looked about right, I put the frames back together to give it all a test fit. 15:37 I've left the barest clearance between the crutch fork and the pendulum block, to minimise energy loss, and the eccentric bushing is ready to be adjusted as required in the next episode. Which leaves just a few key components to be made, before I can set the clock running. References: John Wilding "Large Wheel Skeleton Clock" construction book can be purchased online from Ian T Cobb: http://www.clockmaking-brass.co.uk/clock_construction_books.html Making The Crutch Assembly And Eccentric Bushing, by Clickspring.

Comments

Michael Haymore

As always, such excellent videos! Any chance that in the future you could do a video on your filming techniques? I know you work in a small space, I'd be interested in seeing what equipment you use, and how you get some of your shots, especially the moving ones you've got for showing things off.

PJ

Wonderful Chris! Only thing I must have missed somewhere is that tool with the washer on the end. Never seen anything like it but looks to be one of your wizardry! Kind of ball end mill of sorts? You said something about an oil pocket...couldn't quite make it out. Was that a squeaky escapement...@¿@...gona halfta erl that thing. OH Boy, almost there! It's been just the best ride getting here...Thanks Much! ~PJ

Paul Grodt

I was wondering that myself. steel washers are really hard (I killed a cheap drill bit trying to taper one once); and brass is pretty soft. it might literally just be that!

SCOTT SWAALEY

Hi Chris, what tool post were you using on the Sherline? I would love a recommendation for QCTP. Thanks for another great video!

Scott Clausen

Great video. I'm getting more excited as you near the end in the construction process. I hope you have another project planned as these videos have become a habit that I don't want to break. Again, well done!

clickspring

Thank you Scott! I think the next project is going to be an absolute doozy. I'll give the full details on it when this one is over the line in a few more episodes, but I am super excited about it.

Anonymous

Hello Chris! Great work as allways! Now that the clock is near completion, have you thought og something new to make in the shop after?

Anonymous

As always, astounding! Job well done Chris!

Paul Busby

Brilliant as always. Really enjoy all these video's cannot wait for it to be finished. The vices you use seem to be mounted​ to something. Do you have an overall picture of the setup. Brilliant idea to have them easily removable from the bench.

AM de Jager

Man that was beautiful to watch - thanks Chris! My day started in a bad way with my Windows profile getting corrupted, but it sure ended well :)

Al McKague

Once again a wonderful video! Its all over too quickly.

Magik Eh

Wow! So close to wrapping this project up. Loving every second of it yet. Amazing how in 10 seconds you described a full days work with those screws Chris, keep up the hard work and dedication!

clickspring

Thanks Kjetil! Yes I have been spending a lot of time getting the next project all planned out. It will follow on directly from this one, and the next patron Series project will also tie in with it too. I'm very excited about it, I'll be able to talk a bit more about it when I've got this one finished.

clickspring

Hey Paul, yes its a bit tight in my little shop, so I need to be able to move everything around to make the most of my space. The 2 vises are screwed onto an old wooden cutting board 500mm x 350mm x 40mm. I've mounted them so that I can just rotate the board to bring one or the other to the 'front' as needed. When I first tried out the idea, I was sure it would be too unstable, but its turned out to be very effective. I rarely have to push that hard with the scale of work that I do, so the weight of the 2 vises and the board are enough to keep still on the bench. On the rare occasion that I really have to put some muscle behind it, I have used 2 Kwik Grip clamps to clamp the cutting board to the bench, and it holds it quite still.

Iain Deas

Another brilliant video Chris, can't wait to see the final product! But on another note I seen a previous comment asking if you'd make a video tour of your workshop, if you did would you consider showing the audience the man behind the camera? Cheers

Damien Miller

Thanks for another excellent video. Could I ask which collet system you're using on your Sherline lathe? Are these the WW collets that they sell or something different?

clickspring

Hey Damien, yes they are the Sherline WW collets. They work well, but be aware that they are not hardened steel, just a mild steel, so they are quite soft and fragile. The price reflects this, and they are still very useful, but they do pick up damage quite easily.

Brian Boatright

What is a roller cutter and when /why is it used versus a more traditional style cutter? Is it limited to smaller machining tasks like this one?

Neel Pawar

when will you be releasing the next patreon series video?