Home Creators Posts Import Register Favorites Logout

Content

It's odd to think of things like this as being "retro", but they are hard to find new these days.

This one is semi-modern with the traditional colour disk, but a bright cold-white LED bulb that gives a very vivid look to the fibres.

https://youtu.be/bxevVwO9vNM

Files

Inside a retro fibre optic flower base

Nothing too complex about this. It's a slight update on the classic fibre optic spray or flower light, but with an upgrade from a halogen lamp to an LED one. The classic fibre optic displays pre-date LEDs and tended to use a tungsten or metal halide light source. The colour and effects are based on rotating disks, and there used to be very complex fibre optic signs that mapped the fibres onto the disk assembly with multiple concentric effect layers These days, the fibre optic light sources have gone in the direction of high power RGB LEDs. The downside of that is that you just get a solid colour change without the sweeping effect of the disk. You can also get patches of primary colours on the fibres due to the position of the red, green and blue LED emitters. The main advantages of the LED sources is that they run much cooler and use significantly less power. There have been interesting systems using rotating PCBs with multiple coloured LEDs to emulate a rotating disk. This version is the classic 12V AC base with a synchronous motor, but the tungsten bulb has been swapped for an LED one. The unit is visually brighter, with very vivid colours due to the cold white light source. It makes the colder colours like blue much brighter. If you have an old fibre optic light like this it may be viable to upgrade it with a suitable LED bulb. The smaller units like this one tend to use an MR11 bulb (Metallised Reflector 11/8ths of an inch diameter). Some larger units use an MR16 bulb. My first fibre optic lamp had very slender glass fibres and a candle bulb for illumination. The glass fibres were notorious for breaking and giving you painful glass skelfs. You may be able to find some of the retro fibre optic flowers on eBay. If you enjoy my videos then the easiest way to support the channel is to subscribe for more good video content. But if you would like to contribute a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also do Patreon live streams, which are much more relaxed and chatty than the busy public ones. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

Rob\Viewdata Preservation

I used to have a fiber optic Christmas tree that used an identical mechanism and looked great. It got replaced by one with a color changing LED which personally I find very underwhelming.

Zeedijk Mike

My homebrew moodlight has 3 of the hex LEDs R-G-B Over the LEDs I have a slowly rotating rough glass. The housing and gears are all 3D printed. Because of the relative large distance between the LEDs, it gives a very nice colour mix on the wall, where you can see both the pure colour and the mix. Looks a little like the crystal light you demonstrated quite some time ago

adrian

Using multiple LEDs with the possibility of 'moving' the colour map across the fibres as a filter wheel does seems a much better idea than a single colour-changing LED.

Dave Frederick AKA @amorphuc

Interesting. Thanks Big Clive. Interesting note about the color changing LEDs. I've noticed that too that there is a notable shift between certain colors and it isn't totally smooth. It hasn't really bothered me that much but the rotating wheel certainly seems to have an advantage there. Kind of cool too that this arrangement will use less power and put out less heat as well.