Home Creators Posts Import Register Favorites Logout

Content

I featured a similar unit about 4 years ago, but hadn't featured this version yet. With the current disruptive politics around the world, it's probably useful to know that you can improvise a device out of technical junk, that can create a sterilising spray and potentially make collected water safer to drink.

You could make one of these out of a bit of stainless steel, a bit of graphite and a small low current solar panel. Just add some common table salt and you have your emergency kit.

https://youtu.be/oKejYYs4VeY

Files

Emergency chlorine generator for water and surface sterilisation

I've featured similar devices to this in the past, notably a spray bottle that generates chlorine based disinfectant on demand using water and some standard sodium chloride table salt. But it's worth revisiting the technology, as it could be very useful if there was some sort of natural disaster. This device used electrolysis to generate a potent chlorine sterilising agent from plain (or contaminated) water and salt. It could potentially be used to sterilise water for drinking, to preserve it or to make a stronger chlorine solution for cleaning and medical use. A common method for deep sterilisation of medical establishments is to fog them with a hypochlorous acid solution. This is notable for being a potent disinfectant, while also being safe for skin contact and breathing at low concentrations. In some instances hypochlorous acid fog can be used for treating lung infections. These units do produce some sodium hypochlorite too, which makes them less suited to inhalation at high concentration. Note that only a trace level of chlorine is needed for drinking water sterilisation. You can buy tiny soluble chlorine (Sodium dichloroisocyanurate) tablets for this use (Oasis water tablets). Sodium hypochlorite is commonly used for sterilising public water supplies, and you can sometimes get a slight smell or taste of it in tap water. The nice thing about this module is that it can use any low voltage and low current source of electricity, so even a low power solar panel on an overcast day could give useful results. There was a very useful correlation between mAh and chlorine strength, that could allow a typical USB monitor device to be used as a level indicator. It could be viable to use a simple current regulator circuit to get predictable time based results. The electrode material of the anode is critical, as the process can cause rapid degradation of most metals. For emergency improvised electrodes it may be viable to use graphite for that electrode and stainless steel for the cathode. Here's a Wikipedia article that gives more information:- https://en.wikipedia.org/wiki/Hypochlorous_acid It's been a while since I bought this unit, but they are still commonly available. Here's a link to a couple of types on AliExpress (not a sponsor). These are affiliate links, but that will not affect the price you pay. The most common type:- https://s.click.aliexpress.com/e/_c2yRaJT1 A similar version to the one in the video:- https://s.click.aliexpress.com/e/_c43qTXwB A larger spray bottle version for making a disinfectant spray:- https://s.click.aliexpress.com/e/_c3Hbcax5 The small units should cost around £5-£10 and the large spray unit should cost around £20. If you enjoy my videos then the easiest way to support the channel is to subscribe for more good video content. But if you would like to contribute a dollar or two for coffee, cookies and gadgets to take apart, you can do so by supporting me on Patreon. I release videos without adverts for critique and feedback on Patreon as soon as they have been made. I also do Patreon live streams, which are much more relaxed and chatty than the busy public ones. https://www.patreon.com/bigclive Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive #ElectronicsCreators

Comments

JRSC01

Thanks BC 👍

jswizard

Fascinating. I'm wondering. I had a steam humidifier that boiled water by applying mains voltage (120 VAC) on a pair of immersed electrodes – one stainless and one carbon, I think. No other circuitry except a neon lamp and power switch. Very effective at boiling water to create plumes of steam for inhalation or room humidification. But would this configuration also generate chlorine? Seems like that'd be really unhealthy. Oh, BTW, the manufacturer recommended that you add salt to the water if insufficient steam was generated. What are your thoughts?

Big Clive

The humidifiers that used directly immersed electrodes are using AC, so very little electrolysis would happen. The salt in that instance was just to increase the conductivity of the water. It's possible that trace amounts of chlorine did occur.

Dave Frederick AKA @amorphuc

Very interesting! Thanks Big Clive. A while back, I was looking at devices that would produce Sodium Hypochlorite at home. Most were in the $100 dollar range so I did an experiment using SS rods which didn't work because one or both (can't remember) discolored and created a grey liquid. Then I found that there are specific electrodes, as you mentioned, that they use and they were out of the price range for further experimentation. My final opinion was that I could buy many gallons of actual 5% bleach for $100. LOL

Angus Ross-Thomson

It would have been interesting to test the water before and after the experiment for a full comparison.

Big Clive

With just salty water there is no colour change in the chlorine test strips.

Dave Frederick AKA @amorphuc

Weird question kind of after the fact - sorry. I have one of those Ruideng units but even setting it to the max, doesn't keep it alive continuously. Does yours go to sleep after a time as well? I wish mine would stay lit all the time.

Big Clive

Set the display timer to zero for continuous use.

Dave Frederick AKA @amorphuc

Thanks Big Clive! That totally worked! I had it set to 9 which I thought was the upper limit.