👉 Download the Premium Model - Click Here

Important: This model requires a multi-color printing setup to achieve fine details. Included in this package are pre-colored, ready-to-print profiles for both Bambu and Snapmaker machines, making the printing process simple and straightforward.

I recommend the Snapmaker U1 3D printer as that is the printer I used for this model. If you are planning to purchase one you can get 5% off using my referral link. Make sure to click the link below and enter PLAY_CO during checkout so the discount is applied.

[Purchase the Snapmaker U1 3D printer and save 5% - click here!]

Bring the ultimate villain of the ThunderCats to life with Mumm-Ra! Captured in his iconic, frail mummy form before transformation, this model features his gaunt, ancient look, flowing bandages, red hooded cloak, and menacing glowing eyes. It's a classic 80s icon that is sure to stand out in any retro collection or 3D printing setup.

Dimensions:

At 100% scale, Mumm-Ra stands approximately 7.87 inches (200mm) tall. Scaling up should work fine, but scaling down may tighten tolerances and make the multi-color parts less detailed.

Colors Used:

Bambu Basic: Black, Red

Bambu Matte: Dark Red, Sky Blue, Bone White

Print Profile:

Two print profiles are included: one for Bambu printers and one for Snapmaker printers.

All multi-color parts shown in the photos were printed using the Snapmaker U1.

Below is a breakdown of the multi-color parts for a standard Bambu AMS system and the Snapmaker multi-tool changer:

Bambu P1S/X1C (AMS)

Head: 14Hr 53m | Filament used: 227.49g

Body, Wrap & Pins: 58m 27s | Filament used: 23.80g

Arms: 5Hr 53m | Filament used: 92.55g

Legs & Feet: 8Hr 16m | Filament used: 131.11g

Cape: 4Hr 37m | Filament used: 141.52g

Staff Head: 4Hr 21m | Filament used: 60.26g

Staff: 44m 38s | Filament used: 6.99g

Horn: 16m296s | Filament used: 1.99g

Snapmaker U1 (Tool Changer)

Head: 3Hr 25m | Filament used: 41.15g

Body, Wrap & Pins: 1Hr 15m | Filament used: 22.86g

Arms: 2Hr 24m | Filament used: 34.19g

Legs & Feet: 2Hr 24m | Filament used: 36.84g

Cape: 5Hr 5m | Filament used: 120.68g

Staff Head: 1Hr 12m | Filament used: 13.48g

Staff: 58m 58s | Filament used: 6.94g

Horn: 16m29s | Filament used: 1.95g

Assembly Tips:

Insert the arms into the cape before attaching the body. Press firmly to secure them in place.

For easier assembly, attach the feet to the legs and then to the body before attaching the completed piece to the cape.

To ensure the staff is aligned correctly, make sure the pins used to assemble the staff are pointing forward.

Assembly Steps:

Attach the arms to the cape. Press firmly to secure them in place.

Attach the feet to the legs, then attach the legs to the body.

Attach the body to the cape.

Attach the head to the cape, followed by the hanging wrap under the face.

Attach the hanging wrap pieces to the cape.

Assemble the staff. Make sure the pins are pointing toward the front of the staff.

Attach the back of the head to the staff head. Insert the staff into the hand, then attach the staff head to the top of the staff.

Your model is now complete!

Thank you for printing this model and for supporting Playco Fusion. We’d love to see your finished print, so be sure to share your photos!