ANOTHER STORAGE BOX - BUT A TOON ONE! (Patreon)

Hello my dear friends!!! While working on the two next projects, which will be released soon, i realized that i needed another storage box for my office. So i decided to take a moment to design a nice looking box with some cartoon speech bubbles on it! 

And i really love how it turned out!!! 

This is a super simple project, that requires no support. 

The dimensions of the box are 120mm x 160mm x 80mm High. 

The parts are easy and quick to print. The box is thin (while being strong) and the colored panels are printed in a flat position on the bed, separately. A complete bambulab project file is also included inside the zip folder.

IMPORTANT: YOU DON'T NEED A MULTICOLOR PRINTER FOR THIS PROJECT! 

You can print this project on any regular printer. 

For the colored panels, a simple color change at the right layer will do the job. If you are not familiar with the procedure, here's some quick links on how to do it. It is for prusaslicer and for cura, but most of the slicers work the same way. 

PRUSASLICER: https://help.prusa3d.com/article/color-change_1687

CURA: https://www.instructables.com/How-to-Change-Filament-Mid-print-Using-Cura-48/

That being said, you will print all the parts with a 0.2mm layer height. 

With the 0.2mm layer height set, here's the list for the color changes: 

SIDE PANELS (All four): 

First change at 0.80mm (layer 4)

Second change at 1.40mm (layer 7)

Third change at 2.00mm (layer 10)

TOP PANEL: 

First change at 1.40mm (layer 7)

Second change at 2.00mm (layer 10)

Third change at 2.60mm (layer 13)

LIST OF FILAMENTS USED ON THIS PROJECT: 

-Pastel Yellow: 3DPrintingCanada house brand - Pastel Yellow

-Dark Yellow: Unfortunately, brand is now out of business, but any dark yellow will work.

-Light Blue: 3DPrintingCanada house brand - Light Blue

-Dark Blue: 3DPrintingCanada house brand - Blue

-Baby Pink: 3DPrintingCanada house brand - Baby Pink

-Pink: 3DPrintingCanada house brand - Pink

-Lime Green: Spectrum Filaments - Lime Green

-Dark Green: Spectrum Filaments - Forest Green

-Light Orange: Polymaker Polyterra - Sunrise Orange

-Dark orange: Unfortunately, brand is now out of business, but any dark orange will work.

-White: Sakata pla 850 - White

-Black: M3D Performance PLA - Black. 

LAST BUT NOT LEAST: There are no assembly instructions for this project. It is almost impossible to make a mistake and its only a matter to gluing the correct panels around the box. But in any case, if you are experiencing some problems, feel free to send me a private message. I will try to help you as much as i can!

Have fun my friends! Hope you like it! :) Pascal