Home Creators Posts Import Register Favorites Logout

Content

For real this time!

https://www.youtube.com/watch?v=PnJZSk4JHFM

As you may have guessed I've taken a bit of a rest over the holidays, but I'm back! And there's plenty o' stuff happening. But that stuff will take a lot of effort, so in the meantime here's a simple "let's look at a thing" video. Hope you enjoy it!

This is hot off the presses, so there's work to be done, of course. Captions coming soonly!

Files

Timer switches: literally just a clock and a switch

Think that'll work as a title? We'll see I guess.

Comments

Aaron Carson

Just Enough Effort January begins! 😉

eaglebeagle

About TIME, you CLOCKed in this year!.... I'll show myself out

GameGrime

The mention about power synchronous motors and the comment about accidental drift reminded me about a Tom Scott video called "European clocks ran slow for a bit. British clocks didn't." Pretty neat video! Excited to see the next tompic

Yakkers

The first thing I thought was "is a little teeny clock actually going to have the torque required to flick that switch over?" but when you see it's a 3600 RPM motor reduced down to one rotation per day, that's an insane amount of mechanical advantage. Neat!

Carl Wandering

Obviously you snuck into my house and explored the kitchen junk drawer. I have all these, plus Wemo.

BrandEver

Good video. You should make a video about auto-dimming rearview mirrors (and manual dimming...what exactly happens when you flip that little tab thingy?)

William Hurt

I have two such devices! great for turning warming bulbs on and off during cold season!

William Hurt

My family and I just relocated to Oregon, we re a little concerned about the smokey season. You should do a video about air purifiers! Ive been looking into them and their are a lot of them out there and they make a lot of big claims!

Matt Goldman

never lose a clip with this one simple trick: simply put your extra ON clip immediately after the ON clip you actually want to turn the power on, and same for the OFF clip. Since the second identical clip in a row will just leave the power in the same state.

Veronica

To bad the sound of analogue timers makes them hard to place. However I love my timer with a light sensor, it is on only when it is dark outside.

Joel Devlin

as an Old Timer myself, I appreciate the callout

Michael Dunn

ikr? I have a timer that I intended to use on my bedroom light, but I had to remove it because the sound of the gears turning is *just* loud enough to annoy me while I'm sleeping.

Michael Dunn

The woodgrain on the first timer just screams '70s.

Peter

I have had trouble with two mechanical timers losing the time after several months in use (and even failing to actuate the switch). I'm now using a new-fangled digital version to see if it lasts longer.

Peleg Tuchman

These things are super popular in Israel (and I presume other Jewish communities) and refered to as "Sabath clock". This is because the are usually used by Jews who "keep Sabath". Under Jewish tradition one is allowed to have electric appliences/lights running on Saturday, but are not allowed to turn them on or of (or interact with them in any meaningful way). Thses clocks provide a loophole to allow them to, for example, have the lights turn off at night. Due to there popularity though, they are also wiedly used to turn the water heater on and off in order to save power.

Jim Hewlett

Our old Rover car (P6 '63 to '77) had a timer switch that wound the clock up. When the small spring ran down a switch would cause a solenoid to pull the spring back again. It would run for about 15 minutes and then a 'clunk' would indicate a rewind.

Chris Crowther

I'm guessing in Euroland ours just use a different gearing ratio to get one rotation a day out of 50Hz.

Simon Upton-Millard

Hang on this isn't a 40 minute video I feel chested (don't worry not serious,) hope you had a good restful brake

MrHammond

Fositicated electronicals is all we need :-P

HarveyB

I distinctly remember seeing an Intermatic 100 series on the wall of the principals office in my elementary school. That would have been sometime in the early '60s, and it looked pretty old even then. The 100 series was designed to be wall mounted and permanently installed, and had "on" and "off" tabs made of stamped metal and having a clamping screw. BTW, the 100 series is still in production and available at MANY places, both on and off the internet.

Martin Ibert

I am not constrained by the word "switch" being ursurped by the Nintendo crowd as I can google "Zeitschaltuhr" with no problem. But it doesn't really help me much as that German word is used both for the staircase type (relative time switches) and the time-of-day type (absolute time switches). Anyway, I guess you already found the 1918 mention of a staircase-type prototype built by Paul Schwenk and hist first installation in Stuttgart in 1921. If not: https://www.theben.de/the-company-en-gb/history/100-years-theben/ But I also found mention of Fritz Sauter producing timers for street lamps as far back as 1910. https://issuu.com/sauter/docs/p100019451_sauter_facts_no_40_web_en/s/13119307 -- though it doesn't say they were electric. So it's probably fair to say that these things have been around for about 1000 years, give or take a dozen years or so.

Seán Byrne

7-day plug-in mechanical timers are available, at least here in Ireland. It looks like the last featured timer, but has 84 tabs, each covering 2 hour intervals and makes one complete rotation per week. My previous workplace used a few to operate electric radiators on Monday/Wednesday/Friday.

Donald J Arndt

I want one that would also input sunset so I don't have to keep adjusting it for the table lamp that we want to come on at twilight and turn off at 2 AM.

Mark Johansson

I had a 1941 Buick with a clock that worked the same way

Mark Johansson

14:50 - they need to put those in cars so there aren't so many people driving around at night with their lights off

Chris Hermann

10:27 I can’t see if the wires are soldered or not, it’s possible this is a wire wrap binding post. I’ve never seen it on mains voltage before, but was very common in the earlier days of telecommunications. Square peg, round wire wound tight. It does the trick!

CharlieVictor

One nifty unintended feature of the electrically-driven mechanical timers that use mains power is that they can let you see how long your power was out if there was an outage. Of course, any other electric mechanical clock (as opposed to electronic digital) can do the same, but I'd bet that one of these is the only electric mechanical clock left in many homes.

Circuitmike

That's a perfect TC topic!

Circuitmike

I thought of that, too, but those looked round to me. Hard to tell from the video, though.